An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Administration passwords can be retried without authenticating.

SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program.

The IBM Tivoli Storage Manager (IBM Spectrum Protect 7.1 and 8.1) default authentication protocol is vulnerable to a brute force attack due to disclosing too much information during authentication. An attacker could gain user or administrative access to the TSM server. IBM X-Force ID: 118750.

A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

The m_authenticate function in ircd/m_authenticate.c in nefarious2 allows remote attackers to spoof certificate fingerprints and consequently log in as another user via a crafted AUTHENTICATE parameter.

Unspecified vulnerability in Sun Java System Access Manager (AM) 7.1, when used with certain versions and configurations of Sun Directory Server Enterprise Edition (DSEE), allows remote attackers to bypass authentication via unspecified vectors.

RSS-aggregator 1.0 does not require administrative authentication for the admin/fonctions/ directory, which allows remote attackers to access admin functions and have unspecified other impact, as demonstrated by (1) an IdFlux request to supprimer_flux.php and (2) a TpsRafraich request to modifier_tps_rafraich.php.

An Improper Authentication issue was discovered in JanTek JTC-200, all versions. The improper authentication could provide an undocumented BusyBox Linux shell accessible over the TELNET service without any authentication.

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

An issue was discovered in Kabona AB WebDatorCentral (WDC) application prior to Version 3.4.0. WDC does not limit authentication attempts that may allow a brute force attack method.

Apache Pony Mail 0.6c through 0.8b allows remote attackers to bypass authentication.

Insufficient authentication vulnerability in Junos Space before 15.2R2 allows remote network based users with access to Junos Space web interface to perform certain administrative tasks without authentication.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 do not require authentication for Embedded_Ace_Get_Task.cgi requests.

IBM BigFix Remote Control before 9.1.3 does not properly restrict failed login attempts, which makes it easier for remote attackers to obtain access via a brute-force approach.

Symfony before 2.8.6 and 3.x before 3.0.6 allows remote attackers to bypass authentication by logging in with an empty password and valid username, which triggers an unauthenticated bind.

J-Web in Juniper Junos OS before 12.1X46-D45, 12.1X46-D50, 12.1X47 before 12.1X47-D35, 12.3 before 12.3R12, 12.3X48 before 12.3X48-D25, 13.3 before 13.3R10, 13.3R9 before 13.3R9-S1, 14.1 before 14.1R7, 14.1X53 before 14.1X53-D35, 14.2 before 14.2R6, 15.1 before 15.1A2 or 15.1F4, 15.1X49 before 15.1X49-D30, and 15.1R before 15.1R3 might allow remote attackers to obtain sensitive information and consequently gain administrative privileges via unspecified vectors.

The _gnutls_recv_client_kx_message function in lib/gnutls_kx.c in libgnutls in gnutls-serv in GnuTLS before 2.2.4 continues to process Client Hello messages within a TLS message after one has already been processed, which allows remote attackers to cause a denial of service (NULL dereference and crash) via a TLS message containing multiple Client Hello messages, aka GNUTLS-SA-2008-1-2.

The XML API in TelePresence Codec (TC) 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, and 7.3.5 and Collaboration Endpoint (CE) 8.0.0, 8.0.1, and 8.1.0 in Cisco TelePresence Software mishandles authentication, which allows remote attackers to execute control commands or make configuration changes via an API request, aka Bug ID CSCuz26935.

ProjectSend (formerly cFTP) r582 allows authentication bypass via a direct request for users.php, home.php, edit-file.php?file_id=1, or process-zip-download.php, or add_user_form_* parameters to users-add.php.

Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.

In the GUI of Ceragon FibeAir IP-10 (before 7.2.0) devices, a remote attacker can bypass authentication by adding an ALBATROSS cookie with the value 0-4-11 to their browser.

Pivotal Cloud Foundry (PCF) Ops Manager before 1.5.14 and 1.6.x before 1.6.9 uses the same cookie-encryption key across different customers' installations, which allows remote attackers to bypass session authentication by leveraging knowledge of this key from another installation.

console-io is a module that allows users to implement a web console in their application. A malicious user could bypass the authentication and execute any command that the user who is running the console-io application 2.2.13 and earlier is able to run. This means that if console-io was running from root, the attacker would have full access to the system. This vulnerability exists because the console-io application does not configure socket.io to require authentication, which allows a malicious user to connect via a websocket to send commands and receive the response.

The Admin UI in Apache Ranger before 0.5.1 does not properly handle authentication requests that lack a password, which allows remote attackers to bypass authentication by leveraging knowledge of a valid username.

The Zyxel P-2602HW-D1A router with 3.40(AJZ.1) firmware maintains authentication state by IP address, which allows remote attackers to bypass authentication by establishing a session from a source IP address of a user who previously authenticated within the previous 5 minutes.

ganglia-web before 3.7.1 allows remote attackers to bypass authentication.

Advantech EKI-132x devices with firmware before 2015-12-31 allow remote attackers to bypass authentication via unspecified vectors.

NetApp Data ONTAP before 8.2.4, when operating in 7-Mode, allows remote attackers to bypass authentication and (1) obtain sensitive information from or (2) modify volumes via vectors related to UTF-8 in the volume language.

FortiOS 5.2.3, when configured to use High Availability (HA) and the dedicated management interface is enabled, does not require authentication for access to the ZebOS shell on the HA dedicated management interface, which allows remote attackers to obtain shell access via unspecified vectors.

puppetlabs-mysql 3.1.0 through 3.6.0 allow remote attackers to bypass authentication by leveraging creation of a database account without a password when a 'mysql_user' user parameter contains a host with a netmask.

Sauter EY-WS505F0x0 moduWeb Vision before 1.6.0 allows remote attackers to bypass authentication by leveraging knowledge of a password hash without knowledge of the associated password.

Dataprobe iBootBar (with 2007-09-20 and possibly later released firmware) allows remote attackers to bypass authentication, and conduct power-cycle attacks on connected devices, via a DCRABBIT cookie.

The SSHv2 functionality in Cisco IOS 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.6E before 3.6.3E, 3.7E before 3.7.1E, 3.10S before 3.10.6S, 3.11S before 3.11.4S, 3.12S before 3.12.3S, 3.13S before 3.13.3S, and 3.14S before 3.14.1S does not properly implement RSA authentication, which allows remote attackers to obtain login access by leveraging knowledge of a username and the associated public key, aka Bug ID CSCus73013.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

Dataprobe iBootBar (with 2007-09-20 and possibly later beta firmware) allows remote attackers to bypass authentication, and conduct power-cycle attacks on connected devices, via a DCCOOKIE cookie.

The RPC service in Tripwire (formerly nCircle) IP360 VnE Manager 7.2.2 before 7.2.6 allows remote attackers to bypass authentication and (1) enumerate users, (2) reset passwords, or (3) manipulate IP filter restrictions via crafted "privileged commands."

An issue was discovered on Shenzhen Coship RT3050 4.0.0.40, RT3052 4.0.0.48, RT7620 10.0.0.49, WM3300 5.0.0.54, and WM3300 5.0.0.55 devices. The password reset functionality of the router doesn't have backend validation for the current password and doesn't require any type of authentication. By making a POST request to the apply.cgi file of the router, the attacker can change the admin username and password of the router.

An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.

Soreco Xpert.Line 3.0 allows local users to spoof users and consequently gain privileges by intercepting a Windows API call.

The custom authentication realm used by karaf-tomcat's "opendaylight" realm in Opendaylight before Helium SR3 will authenticate any username and password combination.

This vulnerability allows remote attackers to bypass authentication on affected installations of Commvault CommCell 11.22.22. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CVSearchService service. The issue results from the lack of proper validation prior to authentication. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-13706.

A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.

Admin.php in Olate Download (od) 3.4.1 uses an MD5 hash of the admin username, user id, and group id, to compose the OD3_AutoLogin authentication cookie, which makes it easier for remote attackers to guess the cookie and access the Admin area.

An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Firmware can be updated over the network without authentication, which may allow remote code execution.

A flaw, similar to to CVE-2016-9646, exists in ikiwiki before 3.20170111, in the passwordauth plugin's use of CGI::FormBuilder, allowing an attacker to bypass authentication via repeated parameters.

An Improper Authentication issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Specially crafted requests allow a possible authentication bypass that could allow remote code execution.

In the Secure File System in all Android releases from CAF using the Linux kernel, a capture-replay vulnerability could potentially exist.

Networking OS10, versions prior to October 2021 with RESTCONF API enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

In versions 8.2.1 through 8.5.2 of Pega Infinity, the password reset functionality for local accounts can be used to bypass local authentication checks.