In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log]

In the Linux kernel, the following vulnerability has been resolved: codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue().

In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: Fix buffer overflow at UMP SysEx message conversion The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message.

In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed.

In the Linux kernel, the following vulnerability has been resolved: coresight: prevent deactivate active config while enabling the config While enable active config via cscfg_csdev_enable_active_config(), active config could be deactivated via configfs' sysfs interface. This could make UAF issue in below scenario: CPU0 CPU1 (sysfs enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() unload module // access to config_desc which freed // while unloading module. cscfg_csdev_enable_config To address this, use cscfg_config_desc's active_cnt as a reference count which will be holded when - activate the config. - enable the activated config. and put the module reference when config_active_cnt == 0.

In the Linux kernel, the following vulnerability has been resolved: sctp: do asoc update earlier in sctp_sf_do_dupcook_a There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this.

In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix a use after free in ath10k_htc_send_bundle In ath10k_htc_send_bundle, the bundle_skb could be freed by dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later by bundle_skb->len. As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to skb_len after the bundle_skb was freed.

In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix a buf size overflow issue during udmabuf creation by casting size_limit_mb to u64 when calculate pglimit.

In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ssip_xmit_work ssi_protocol_remove | kfree(ssi); | | struct hsi_client *cl = ssi->cl; | // use ssi Fix it by ensuring that the work is canceled before proceeding with the cleanup in ssi_protocol_remove().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Protect mgmt_pending list with its own lock This uses a mutex to protect from concurrent access of mgmt_pending list which can cause crashes like: ================================================================== BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91 Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318 CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 print_address_description+0xa8/0x254 mm/kasan/report.c:408 print_report+0x68/0x84 mm/kasan/report.c:521 kasan_report+0xb0/0x110 mm/kasan/report.c:634 __asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379 hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91 mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223 pending_find net/bluetooth/mgmt.c:947 [inline] remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445 hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x25c/0x378 net/socket.c:1131 new_sync_write fs/read_write.c:591 [inline] vfs_write+0x62c/0x97c fs/read_write.c:684 ksys_write+0x120/0x210 fs/read_write.c:736 __do_sys_write fs/read_write.c:747 [inline] __se_sys_write fs/read_write.c:744 [inline] __arm64_sys_write+0x7c/0x90 fs/read_write.c:744 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Allocated by task 7037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4327 [inline] __kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198 sk_alloc+0x44/0x3ac net/core/sock.c:2254 bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148 hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202 bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132 __sock_create+0x43c/0x91c net/socket.c:1541 sock_create net/socket.c:1599 [inline] __sys_socket_create net/socket.c:1636 [inline] __sys_socket+0xd4/0x1c0 net/socket.c:1683 __do_sys_socket net/socket.c:1697 [inline] __se_sys_socket net/socket.c:1695 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1695 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Freed by task 6607: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x68/0x88 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ext4: ignore xattrs past end Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry. This fixes the following KASAN reported issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 Read of size 4 at addr ffff888012c120c4 by task repro/2065 CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1fd/0x300 ? tcp_gro_dev_warn+0x260/0x260 ? _printk+0xc0/0x100 ? read_lock_is_recursive+0x10/0x10 ? irq_work_queue+0x72/0xf0 ? __virt_addr_valid+0x17b/0x4b0 print_address_description+0x78/0x390 print_report+0x107/0x1f0 ? __virt_addr_valid+0x17b/0x4b0 ? __virt_addr_valid+0x3ff/0x4b0 ? __phys_addr+0xb5/0x160 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 kasan_report+0xcc/0x100 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ? ext4_xattr_delete_inode+0xd30/0xd30 ? __ext4_journal_ensure_credits+0x5f0/0x5f0 ? __ext4_journal_ensure_credits+0x2b/0x5f0 ? inode_update_timestamps+0x410/0x410 ext4_xattr_delete_inode+0xb64/0xd30 ? ext4_truncate+0xb70/0xdc0 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20 ? __ext4_mark_inode_dirty+0x670/0x670 ? ext4_journal_check_start+0x16f/0x240 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0 ext4_evict_inode+0xc8c/0xff0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 ? do_raw_spin_unlock+0x53/0x8a0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 evict+0x4ac/0x950 ? proc_nr_inodes+0x310/0x310 ? trace_ext4_drop_inode+0xa2/0x220 ? _raw_spin_unlock+0x1a/0x30 ? iput+0x4cb/0x7e0 do_unlinkat+0x495/0x7c0 ? try_break_deleg+0x120/0x120 ? 0xffffffff81000000 ? __check_object_size+0x15a/0x210 ? strncpy_from_user+0x13e/0x250 ? getname_flags+0x1dc/0x530 __x64_sys_unlinkat+0xc8/0xf0 do_syscall_64+0x65/0x110 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x434ffd Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107 RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001 </TASK> The buggy address belongs to the object at ffff888012c12000 which belongs to the cache filp of size 360 The buggy address is located 196 bytes inside of freed 360-byte region [ffff888012c12000, ffff888012c12168) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x40(head|node=0|zone=0) page_type: f5(slab) raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888012c12180: fc fc fc fc fc fc fc fc fc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled.

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix possible double-free in regcache_rbtree_exit() In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check stream id dml21 wrapper to get plane_id [Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi [ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu [ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024 [ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu] [ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87 [ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246 [ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000 [ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000 [ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000 [ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000 [ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000 [ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0 [ 35.751806] PKRU: 55555554 [ 35.751807] Call Trace: [ 35.751810] <TASK> [ 35.751816] ? show_regs+0x6c/0x80 [ 35.751820] ? __warn+0x88/0x140 [ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751964] ? report_bug+0x182/0x1b0 [ 35.751969] ? handle_bug+0x6e/0xb0 [ 35.751972] ? exc_invalid_op+0x18/0x80 [ 35.751974] ? asm_exc_invalid_op+0x1b/0x20 [ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.752117] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752260] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752403] ? math_pow+0x11/0xa0 [amdgpu] [ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu] [ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu] (cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: move the limit validation It is not sufficient to directly validate the limit on the data that the user passes as it can be updated based on how the other parameters are changed. Move the check at the end of the configuration update process to also catch scenarios where the limit is indirectly updated, for example with the following configurations: tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1 tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1 This fixes the following syzkaller reported crash: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429 sfq_link net/sched/sch_sfq.c:203 [inline] sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline] dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo() syzbot reports: BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60 Read of size 8 at addr ffff88810de2d2c8 by task a.out/304 CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x670 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? getrusage+0x1109/0x1a60 kasan_report+0xce/0x100 ? getrusage+0x1109/0x1a60 getrusage+0x1109/0x1a60 ? __pfx_getrusage+0x10/0x10 __io_uring_show_fdinfo+0x9fe/0x1790 ? ksys_read+0xf7/0x1c0 ? do_syscall_64+0xa4/0x260 ? vsnprintf+0x591/0x1100 ? __pfx___io_uring_show_fdinfo+0x10/0x10 ? __pfx_vsnprintf+0x10/0x10 ? mutex_trylock+0xcf/0x130 ? __pfx_mutex_trylock+0x10/0x10 ? __pfx_show_fd_locks+0x10/0x10 ? io_uring_show_fdinfo+0x57/0x80 io_uring_show_fdinfo+0x57/0x80 seq_show+0x38c/0x690 seq_read_iter+0x3f7/0x1180 ? inode_set_ctime_current+0x160/0x4b0 seq_read+0x271/0x3e0 ? __pfx_seq_read+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? __mark_inode_dirty+0x402/0x810 ? selinux_file_permission+0x368/0x500 ? file_update_time+0x10f/0x160 vfs_read+0x177/0xa40 ? __pfx___handle_mm_fault+0x10/0x10 ? __pfx_vfs_read+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? fdget_pos+0x24d/0x4b0 ksys_read+0xf7/0x1c0 ? __pfx_ksys_read+0x10/0x10 ? do_user_addr_fault+0x43b/0x9c0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0f74170fc9 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8 RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9 RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004 RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90 R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 298: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x6e/0x70 kmem_cache_alloc_node_noprof+0xe8/0x330 copy_process+0x376/0x5e00 create_io_thread+0xab/0xf0 io_sq_offload_create+0x9ed/0xf20 io_uring_setup+0x12b0/0x1cc0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 22: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kmem_cache_free+0xc4/0x360 rcu_core+0x5ff/0x19f0 handle_softirqs+0x18c/0x530 run_ksoftirqd+0x20/0x30 smpboot_thread_fn+0x287/0x6c0 kthread+0x30d/0x630 ret_from_fork+0xef/0x1a0 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x33/0x60 kasan_record_aux_stack+0x8c/0xa0 __call_rcu_common.constprop.0+0x68/0x940 __schedule+0xff2/0x2930 __cond_resched+0x4c/0x80 mutex_lock+0x5c/0xe0 io_uring_del_tctx_node+0xe1/0x2b0 io_uring_clean_tctx+0xb7/0x160 io_uring_cancel_generic+0x34e/0x760 do_exit+0x240/0x2350 do_group_exit+0xab/0x220 __x64_sys_exit_group+0x39/0x40 x64_sys_call+0x1243/0x1840 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88810de2cb00 which belongs to the cache task_struct of size 3712 The buggy address is located 1992 bytes inside of freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980) which is caused by the task_struct pointed to by sq->thread being released while it is being used in the function __io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre relase or exit of sq->thread. Fix this by assigning and looking up ->thread under RCU, and grabbing a reference to the task_struct. This e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated---

In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The nft_verdict_init() function allows positive values as drop error within the hook verdict, and hence the nf_hook_slow() function can cause a double free vulnerability when NF_DROP is issued with a drop error which resembles NF_ACCEPT. We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 143022.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Fix driver shutdown on closed serdev The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume.

In the Linux kernel, the following vulnerability has been resolved: uio: Fix use-after-free in uio_open core-1 core-2 ------------------------------------------------------- uio_unregister_device uio_open idev = idr_find() device_unregister(&idev->dev) put_device(&idev->dev) uio_device_release get_device(&idev->dev) kfree(idev) uio_free_minor(minor) uio_release put_device(&idev->dev) kfree(idev) ------------------------------------------------------- In the core-1 uio_unregister_device(), the device_unregister will kfree idev when the idev->dev kobject ref is 1. But after core-1 device_unregister, put_device and before doing kfree, the core-2 may get_device. Then: 1. After core-1 kfree idev, the core-2 will do use-after-free for idev. 2. When core-2 do uio_release and put_device, the idev will be double freed. To address this issue, we can get idev atomic & inc idev reference with minor_lock.

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix use after free on context disconnection Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The nft_setelem_catchall_deactivate() function checks whether the catch-all set element is active in the current generation instead of the next generation before freeing it, but only flags it inactive in the next generation, making it possible to free the element multiple times, leading to a double free vulnerability. We recommend upgrading past commit b1db244ffd041a49ecc9618e8feb6b5c1afcdaa7.

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use after free on rmmod plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local logging mechanism. Authentication session tokens, including PHPSESSID, XSRF-TOKEN, and laravel_session, are stored in cleartext within world-readable log files. Any local user with access to the machine can extract these session tokens and use them to authenticate remotely to the SaaS environment, bypassing normal login credentials, potentially leading to unauthorized system access and exposure of sensitive information. This vulnerability has been identified by the vendor as: V-2022-008 — Secrets Leaked in Logs.

mknod in Linux 2.2 follows symbolic links, which could allow local users to overwrite files or gain privileges.

In the Linux kernel, the following vulnerability has been resolved: aio: fix use-after-free due to missing POLLFREE handling signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.

In the Linux kernel, the following vulnerability has been resolved: ext4: add bounds checking in get_max_inline_xattr_value_size() Normally the extended attributes in the inode body would have been checked when the inode is first opened, but if someone is writing to the block device while the file system is mounted, it's possible for the inode table to get corrupted. Add bounds checking to avoid reading beyond the end of allocated memory if this happens.

The pt_chown command in Linux allows local users to modify TTY terminal devices that belong to other users.

NVIDIA Resiliency Extension for Linux contains a vulnerability in the checkpointing core, where an attacker may cause a race condition. A successful exploit of this vulnerability might lead to information disclosure, data tampering, denial of service, or escalation of privileges.

Improper initialization of default settings in TeamViewer Remote Client prior version 15.51.5 for Windows, Linux and macOS, allow a low privileged user to elevate privileges by changing the personal password setting and establishing a remote connection to a logged-in admin account.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application versions prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local inter-process communication (IPC) mechanism. The software stores IPC request and response files inside /opt/PrinterInstallerClient/tmp with world-readable and world-writable permissions. Any local user can craft malicious request files that are processed by privileged daemons, leading to unauthorized actions being executed in other user sessions. This breaks user session isolation, potentially allowing local attackers to hijack sessions, perform unintended actions in the context of other users, and impact system integrity and availability. This vulnerability has been identified by the vendor as: V-2022-004 — Client Inter-process Security.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Don't free command immediately Don't prematurely free the command. Wait for the status completion of the sense status. It can be freed then. Otherwise we will double-free the command.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5 and 11.1 binaries load shared libraries from an untrusted path potentially giving low privilege users full access to the DB2 instance account by loading a malicious shared library. IBM X-Force ID: 140972.

NVIDIA NeMo contains a vulnerability in SaveRestoreConnector where a user may cause a path traversal issue via an unsafe .tar file extraction. A successful exploit of this vulnerability may lead to code execution and data tampering.

An issue was discovered in the Linux kernel through 4.17.11, as used in Xen through 4.11.x. The xen_failsafe_callback entry point in arch/x86/entry/entry_64.S does not properly maintain RBX, which allows local users to cause a denial of service (uninitialized memory usage and system crash). Within Xen, 64-bit x86 PV Linux guest OS users can trigger a guest OS crash or possibly gain privileges.

A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system.

An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h->nets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 25.1.102 and Application versions prior to 25.1.1413 (macOS/Linux client deployments) are vulnerable to an authentication bypass in PrinterInstallerClientService. The service requires root privileges for certain administrative operations, but these checks rely on calls to geteuid(). By preloading a malicious shared object overriding geteuid(), a local attacker can trick the service into believing it is running with root privileges. This bypass enables execution of administrative commands (e.g., enabling debug mode, managing configurations, or invoking privileged features) without proper authorization. While some actions requiring write access to protected files may still fail, the flaw effectively breaks the intended security model of the inter-process communication (IPC) system, allowing local attackers to escalate privileges and compromise system integrity. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced.

NVIDIA GPU driver for Windows and Linux contains a vulnerability where a user can cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering.

An out-of-bounds access vulnerability involving netfilter was reported and fixed as: f1082dd31fe4 (netfilter: nf_tables: Reject tables of unsupported family); While creating a new netfilter table, lack of a safeguard against invalid nf_tables family (pf) values within `nf_tables_newtable` function enables an attacker to achieve out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt).

A use-after-free vulnerability in the Linux kernel's ipv4: igmp component can be exploited to achieve local privilege escalation. A race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread. We recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since 6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses were permitted above state->allocated_stack, but not below it. In other words, if the stack was already "large enough", the access was permitted, but otherwise the access was rejected instead of being allowed to "grow the stack". This undesired rejection was happening in two places: - in check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of them were changed to add also run unprivileged, in which case the old behavior persists. One tests couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same commit as the first one because they're inter-related. Before this patch, writes to the stack using registers containing a variable offset (as opposed to registers with fixed, known values) were not properly contributing to the function's needed stack size. As a result, it was possible for a program to verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth, which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the variable offset. This was incorrect; the minimum possible value of that register should be used instead. This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The code is now simpler and more convincingly tracks the correct maximum stack size. check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this helps with the fix for the first issue. A few tests were changed to also check the stack depth computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.