The hypercall_create_continuation function in arch/arm/domain.c in Xen 4.4.x through 4.6.x allows local guest users to cause a denial of service (host crash) via a preemptible hypercall to the multicall interface.

inadequate grant-v2 status frames array bounds check The v2 grant table interface separates grant attributes from grant status. That is, when operating in this mode, a guest has two tables. As a result, guests also need to be able to retrieve the addresses that the new status tracking table can be accessed through. For 32-bit guests on x86, translation of requests has to occur because the interface structure layouts commonly differ between 32- and 64-bit. The translation of the request to obtain the frame numbers of the grant status table involves translating the resulting array of frame numbers. Since the space used to carry out the translation is limited, the translation layer tells the core function the capacity of the array within translation space. Unfortunately the core function then only enforces array bounds to be below 8 times the specified value, and would write past the available space if enough frame numbers needed storing.

long running loops in grant table handling In order to properly monitor resource use, Xen maintains information on the grant mappings a domain may create to map grants offered by other domains. In the process of carrying out certain actions, Xen would iterate over all such entries, including ones which aren't in use anymore and some which may have been created but never used. If the number of entries for a given domain is large enough, this iterating of the entire table may tie up a CPU for too long, starving other domains or causing issues in the hypervisor itself. Note that a domain may map its own grants, i.e. there is no need for multiple domains to be involved here. A pair of "cooperating" guests may, however, cause the effects to be more severe.

The acceleration support for the "REP MOVS" instruction in Xen 4.4.x, 3.2.x, and earlier lacks properly bounds checking for memory mapped I/O (MMIO) emulated in the hypervisor, which allows local HVM guests to cause a denial of service (host crash) via unspecified vectors.

An issue was discovered in Xen through 4.14.x. When a Xenstore watch fires, the xenstore client that registered the watch will receive a Xenstore message containing the path of the modified Xenstore entry that triggered the watch, and the tag that was specified when registering the watch. Any communication with xenstored is done via Xenstore messages, consisting of a message header and the payload. The payload length is limited to 4096 bytes. Any request to xenstored resulting in a response with a payload longer than 4096 bytes will result in an error. When registering a watch, the payload length limit applies to the combined length of the watched path and the specified tag. Because watches for a specific path are also triggered for all nodes below that path, the payload of a watch event message can be longer than the payload needed to register the watch. A malicious guest that registers a watch using a very large tag (i.e., with a registration operation payload length close to the 4096 byte limit) can cause the generation of watch events with a payload length larger than 4096 bytes, by writing to Xenstore entries below the watched path. This will result in an error condition in xenstored. This error can result in a NULL pointer dereference, leading to a crash of xenstored. A malicious guest administrator can cause xenstored to crash, leading to a denial of service. Following a xenstored crash, domains may continue to run, but management operations will be impossible. Only C xenstored is affected, oxenstored is not affected.

HVM soft-reset crashes toolstack libxl requires all data structures passed across its public interface to be initialized before use and disposed of afterwards by calling a specific set of functions. Many internal data structures also require this initialize / dispose discipline, but not all of them. When the "soft reset" feature was implemented, the libxl__domain_suspend_state structure didn't require any initialization or disposal. At some point later, an initialization function was introduced for the structure; but the "soft reset" path wasn't refactored to call the initialization function. When a guest nwo initiates a "soft reboot", uninitialized data structure leads to an assert() when later code finds the structure in an unexpected state. The effect of this is to crash the process monitoring the guest. How this affects the system depends on the structure of the toolstack. For xl, this will have no security-relevant effect: every VM has its own independent monitoring process, which contains no state. The domain in question will hang in a crashed state, but can be destroyed by `xl destroy` just like any other non-cooperating domain. For daemon-based toolstacks linked against libxl, such as libvirt, this will crash the toolstack, losing the state of any in-progress operations (localized DoS), and preventing further administrator operations unless the daemon is configured to restart automatically (system-wide DoS). If crashes "leak" resources, then repeated crashes could use up resources, also causing a system-wide DoS.

An issue was discovered in Xen 4.6 through 4.14.x. When acting upon a guest XS_RESET_WATCHES request, not all tracking information is freed. A guest can cause unbounded memory usage in oxenstored. This can lead to a system-wide DoS. Only systems using the Ocaml Xenstored implementation are vulnerable. Systems using the C Xenstored implementation are not vulnerable.

The pciback_enable_msi function in the PCI backend driver (drivers/xen/pciback/conf_space_capability_msi.c) in Xen for the Linux kernel 2.6.18 and 3.8 allows guest OS users with PCI device access to cause a denial of service via a large number of kernel log messages. NOTE: some of these details are obtained from third party information.

An issue was discovered in Xen through 4.9.x allowing HVM guest OS users to cause a denial of service (infinite loop and host OS hang) by leveraging the mishandling of Populate on Demand (PoD) errors.

A vulnerability in the NETCONF process of Cisco SD-WAN vEdge Routers could allow an authenticated, local attacker to cause an affected device to run out of memory, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient memory management when an affected device receives large amounts of traffic. An attacker could exploit this vulnerability by sending malicious traffic to an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition.

An issue was discovered in Xen 4.4.x through 4.9.x allowing ARM guest OS users to cause a denial of service (prevent physical CPU usage) because of lock mishandling upon detection of an add-to-physmap error.

Memory leak in Xen 3.3 through 4.8.x allows guest OS users to cause a denial of service (ARM or x86 AMD host OS memory consumption) by continually rebooting, because certain cleanup is skipped if no pass-through device was ever assigned, aka XSA-207.

An issue was discovered in Xen through 4.12.x allowing Arm domU attackers to cause a denial of service (infinite loop) involving a LoadExcl or StoreExcl operation.

An issue was discovered in Xen 4.8.x through 4.11.x allowing x86 PV guest OS users to cause a denial of service because mishandling of failed IOMMU operations causes a bug check during the cleanup of a crashed guest.

An issue was discovered in Xen through 4.11.x allowing x86 PV guest OS users to cause a denial of service by leveraging a long-running operation that exists to support restartability of PTE updates.

An issue was discovered in Xen through 4.12.x allowing Arm domU attackers to cause a denial of service (infinite loop) involving a compare-and-exchange operation.

An issue was discovered in Xen through 4.14.x. Xenstored and guests communicate via a shared memory page using a specific protocol. When a guest violates this protocol, xenstored will drop the connection to that guest. Unfortunately, this is done by just removing the guest from xenstored's internal management, resulting in the same actions as if the guest had been destroyed, including sending an @releaseDomain event. @releaseDomain events do not say that the guest has been removed. All watchers of this event must look at the states of all guests to find the guest that has been removed. When an @releaseDomain is generated due to a domain xenstored protocol violation, because the guest is still running, the watchers will not react. Later, when the guest is actually destroyed, xenstored will no longer have it stored in its internal data base, so no further @releaseDomain event will be sent. This can lead to a zombie domain; memory mappings of that guest's memory will not be removed, due to the missing event. This zombie domain will be cleaned up only after another domain is destroyed, as that will trigger another @releaseDomain event. If the device model of the guest that violated the Xenstore protocol is running in a stub-domain, a use-after-free case could happen in xenstored, after having removed the guest from its internal data base, possibly resulting in a crash of xenstored. A malicious guest can block resources of the host for a period after its own death. Guests with a stub domain device model can eventually crash xenstored, resulting in a more serious denial of service (the prevention of any further domain management operations). Only the C variant of Xenstore is affected; the Ocaml variant is not affected. Only HVM guests with a stubdom device model can cause a serious DoS.

Xen, when running on a 64-bit hypervisor, allows local x86 guest OS users to modify arbitrary memory and consequently obtain sensitive information, cause a denial of service (host crash), or execute arbitrary code on the host by leveraging broken emulation of bit test instructions.

The pygrub boot loader emulator in Xen, when nul-delimited output format is requested, allows local pygrub-using guest OS administrators to read or delete arbitrary files on the host via NUL bytes in the bootloader configuration file.

Xen 4.x, when using Intel VT-d for a bus mastering capable PCI device, does not properly check the source when accessing a bridge device's interrupt remapping table entries for MSI interrupts, which allows local guest domains to cause a denial of service (interrupt injection) via unspecified vectors.

Xen 3.1 through 4.x, when running 64-bit hosts on Intel CPUs, does not clear the NT flag when using an IRET after a SYSENTER instruction, which allows PV guest users to cause a denial of service (hypervisor crash) by triggering a #GP fault, which is not properly handled by another IRET instruction.

Citrix XenMobile Server before 10.5.0.24 allows man-in-the-middle attackers to trigger HTTP 302 redirections via vectors involving the HTTP Host header and a cached page. NOTE: the vendor reports "our internal analysis of this issue concluded that this was not a valid vulnerability" because an exploitation scenario would involve a man-in-the-middle attack against a TLS session

Citrix iOS Receiver before 7.0 allows attackers to cause TLS certificates to be incorrectly validated via unspecified vectors.

Xen and the Linux kernel through 4.5.x do not properly suppress hugetlbfs support in x86 PV guests, which allows local PV guest OS users to cause a denial of service (guest OS crash) by attempting to access a hugetlbfs mapped area.

Xen 4.6.x and earlier allows local guest administrators to cause a denial of service (host reboot) via vectors related to multiple mappings of MMIO pages with different cachability settings.

The PV superpage functionality in arch/x86/mm.c in Xen 3.4.0, 3.4.1, and 4.1.x through 4.6.x allows local PV guests to obtain sensitive information, cause a denial of service, gain privileges, or have unspecified other impact via a crafted page identifier (MFN) to the (1) MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in the HYPERVISOR_mmuext_op hypercall or (3) unknown vectors related to page table updates.

The mod_l2_entry function in arch/x86/mm.c in Xen 3.4 through 4.6.x does not properly validate level 2 page table entries, which allows local PV guest administrators to gain privileges via a crafted superpage mapping.

The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages.

An issue was discovered in Xen through 4.12.x allowing attackers to gain host OS privileges via DMA in a situation where an untrusted domain has access to a physical device (and assignable-add is not used), because of an incomplete fix for CVE-2019-18424. XSA-302 relies on the use of libxl's "assignable-add" feature to prepare devices to be assigned to untrusted guests. Unfortunately, this is not considered a strictly required step for device assignment. The PCI passthrough documentation on the wiki describes alternate ways of preparing devices for assignment, and libvirt uses its own ways as well. Hosts where these "alternate" methods are used will still leave the system in a vulnerable state after the device comes back from a guest. An untrusted domain with access to a physical device can DMA into host memory, leading to privilege escalation. Only systems where guests are given direct access to physical devices capable of DMA (PCI pass-through) are vulnerable. Systems which do not use PCI pass-through are not vulnerable.

An issue was discovered in Xen through 4.11.x allowing x86 PV guest OS users to cause a denial of service or gain privileges because a guest can manipulate its virtualised %cr4 in a way that is incompatible with Linux (and possibly other guest kernels).

The do_tmem_op function in the Transcendent Memory (TMEM) in Xen 4.0, 4.1, and 4.2 allow local guest OS users to cause a denial of service (host crash) and possibly have other unspecified impacts via unspecified vectors related to "broken locking checks" in an "error path." NOTE: this issue was originally published as part of CVE-2012-3497, which was too general; CVE-2012-3497 has been SPLIT into this ID and others.

The PCI backend driver in Xen, when running on an x86 system and using Linux 3.1.x through 4.3.x as the driver domain, allows local guest administrators to generate a continuous stream of WARN messages and cause a denial of service (disk consumption) by leveraging a system with access to a passed-through MSI or MSI-X capable physical PCI device and XEN_PCI_OP_enable_msi operations, aka "Linux pciback missing sanity checks."

The do_mmu_update function in arch/x86/mm.c in Xen 4.x through 4.4.x does not properly restrict updates to only PV page tables, which allows remote PV guests to cause a denial of service (NULL pointer dereference) by leveraging hardware emulation services for HVM guests using Hardware Assisted Paging (HAP).

The do_mmu_update function in arch/x86/mm.c in Xen 3.2.x through 4.4.x does not properly manage page references, which allows remote domains to cause a denial of service by leveraging control over an HVM guest and a crafted MMU_MACHPHYS_UPDATE.

Citrix XenApp Online Plug-in for Windows 12.1 and earlier, and Citrix Receiver for Windows 3.2 and earlier could allow remote attackers to execute arbitrary code by convincing a target to open a specially crafted file from an SMB or WebDAV fileserver.

The ARM image loading functionality in Xen 4.4.x does not properly validate kernel length, which allows local users to read system memory or cause a denial of service (crash) via a crafted 32-bit ARM guest kernel in an image, which triggers a buffer overflow.

Xen 4.4.x does not properly check alignment, which allows local users to cause a denial of service (crash) via an unspecified field in a DTB header in a 32-bit guest kernel.

Xen 4.4.x does not properly validate the load address for 64-bit ARM guest kernels, which allows local users to read system memory or cause a denial of service (crash) via a crafted kernel, which triggers a buffer overflow.

The vgic_distr_mmio_write function in the virtual guest interrupt controller (GIC) distributor (arch/arm/vgic.c) in Xen 4.4.x, when running on an ARM system, allows local guest users to cause a denial of service (NULL pointer dereference and host crash) via unspecified vectors.

The (1) do_send and (2) do_recv functions in io.c in libvchan in Xen 4.2.x, 4.3.x, and 4.4-RC series allows local guests to cause a denial of service or possibly gain privileges via crafted xenstore ring indexes, which triggers a "read or write past the end of the ring."

Citrix NetScaler Application Delivery Controller (ADC) 10.0 before 10.0-76.7 allows remote attackers to cause a denial of service (nsconfigd crash and appliance reboot) via a crafted request.

Xen 4.2.x and 4.3.x, when nested virtualization is disabled, does not properly check the emulation paths for (1) VMLAUNCH and (2) VMRESUME, which allows local HVM guest users to cause a denial of service (host crash) via unspecified vectors related to "guest VMX instruction execution."

Xen before 4.1.x, 4.2.x, and 4.3.x does not take the page_alloc_lock and grant_table.lock in the same order, which allows local guest administrators with access to multiple vcpus to cause a denial of service (host deadlock) via unspecified vectors.

The PV domain builder in Xen 4.2 and earlier does not validate the size of the kernel or ramdisk (1) before or (2) after decompression, which allows local guest administrators to cause a denial of service (domain 0 memory consumption) via a crafted (a) kernel or (b) ramdisk.

Qemu, as used in Xen 4.0, 4.1 and possibly other products, when emulating certain devices with a virtual console backend, allows local OS guest users to gain privileges via a crafted escape VT100 sequence that triggers the overwrite of a "device model's address space."

(1) TMEMC_SAVE_GET_CLIENT_WEIGHT, (2) TMEMC_SAVE_GET_CLIENT_CAP, (3) TMEMC_SAVE_GET_CLIENT_FLAGS and (4) TMEMC_SAVE_END in the Transcendent Memory (TMEM) in Xen 4.0, 4.1, and 4.2 allow local guest OS users to cause a denial of service (NULL pointer dereference or memory corruption and host crash) or possibly have other unspecified impacts via a NULL client id.

The PyGrub boot loader in Xen unstable before changeset 25589:60f09d1ab1fe, 4.2.x, and 4.1.x allows local para-virtualized guest users to cause a denial of service (memory consumption) via a large (1) bzip2 or (2) lzma compressed kernel image.

The NSEPA.NsepaCtrl.1 ActiveX control in nsepa.ocx in Citrix Access Gateway Enterprise Edition 8.1 before 8.1-67.7, 9.0 before 9.0-70.5, and 9.1 before 9.1-96.4 attempts to validate signed DLLs by checking the certificate subject, not the signature, which allows man-in-the-middle attackers to execute arbitrary code via HTTP header data referencing a DLL that was signed with a crafted certificate.

The instruction emulation in Xen 3.0.3 allows local SMP guest users to cause a denial of service (host crash) by replacing the instruction that causes the VM to exit in one thread with a different instruction in a different thread.