Memory leak in the IKEv1 implementation in Cisco IOS 15.1 allows remote attackers to cause a denial of service (memory consumption) via unspecified (1) IPv4 or (2) IPv6 IKE packets, aka Bug ID CSCth81055.

Race condition in the IPv6 virtual fragmentation reassembly (VFR) implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.3 allows remote attackers to cause a denial of service (device reload or hang) via fragmented IPv6 packets, aka Bug ID CSCud64812.

Cisco IOS XE 2.x and 3.x before 3.4.5S, and 3.5 through 3.7 before 3.7.1S, on 1000 series Aggregation Services Routers (ASR) allows remote attackers to cause a denial of service (card reload) by sending many crafted L2TP packets, aka Bug ID CSCtz23293.

Cisco Unified Communications Manager (CUCM) 8.6 before 8.6(2a)su2, 8.6 BE3k before 8.6(4) BE3k, and 9.x before 9.0(1) allows remote attackers to cause a denial of service (CPU consumption and GUI and voice outages) via malformed packets to unused UDP ports, aka Bug ID CSCtx43337.

Cisco Wireless LAN Controller (WLC) devices with software 7.0 before 7.0.220.0, 7.1 before 7.1.91.0, and 7.2 before 7.2.103.0 allow remote attackers to cause a denial of service (Access Point reload) via crafted SIP packets, aka Bug ID CSCts87659.

A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131.

Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.1) allows remote attackers to cause a denial of service (device reboot) via malformed SNMP requests.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in HTML file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the TCP throttling process of Cisco UCS C-Series Rack Servers 3.0(0.234) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP SYN packets to a specific TCP listening port on an affected device. An exploit could allow the attacker to cause a specific TCP listening port to stop accepting new connections, resulting in a DoS condition. Cisco Bug IDs: CSCva65544.

Cisco FWSM 3.x before 3.1(3.2), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a long HTTP request.

The SIP implementation in Cisco Unified Communications Manager (CUCM) 6.x and 7.x before 7.1(5b)su5, 8.x before 8.5(1)su4, and 8.6 before 8.6(2a)su1; Cisco IOS 12.2 through 12.4 and 15.0 through 15.2; and Cisco IOS XE 3.3.xSG before 3.3.1SG, 3.4.xS, and 3.5.xS allows remote attackers to cause a denial of service (service crash or device reload) via a crafted SIP message containing an SDP session description, aka Bug IDs CSCtw66721, CSCtj33003, and CSCtw84664.

Buffer overflow in Cisco Unified MeetingPlace Web Conferencing before 7.1MR1 Patch 1, 8.0 before 8.0MR1 Patch 1, and 8.5 before 8.5MR3 allows remote attackers to cause a denial of service (daemon hang) via unspecified parameters in a POST request, aka Bug ID CSCua66341.

A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

Cisco Unified Presence (CUP) before 8.6(3) and Jabber Extensible Communications Platform (aka Jabber XCP) before 5.3 allow remote attackers to cause a denial of service (process crash) via a crafted XMPP stream header, aka Bug ID CSCtu32832.

Unspecified Cisco Catalyst Switches allow remote attackers to cause a denial of service (device crash) via an IP packet with the same source and destination IPs and ports, and with the SYN flag set (aka LanD). NOTE: the provenance of this issue is unknown; the details are obtained solely from the BID.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCtn53730.

Cisco IOS 12.2 and 15.0 through 15.2 on Cisco 10000 series routers, when a tunnel interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via tunneled (1) GRE/IP, (2) IPIP, or (3) IPv6 in IPv4 packets, aka Bug ID CSCts66808.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

Multiple Cisco products are affected by a vulnerability in the way the Snort detection engine processes ICMP traffic that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper memory resource management while the Snort detection engine is processing ICMP packets. An attacker could exploit this vulnerability by sending a series of ICMP packets through an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device, causing the device to reload.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

The Cisco Unified IP Phone 8945 with software 9.3(2) allows remote attackers to cause a denial of service (device hang) via a malformed PNG file, aka Bug ID CSCud04270.

A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.

A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

The IP implementation on Cisco TelePresence Multipoint Switch before 1.8.1, Cisco TelePresence Manager before 1.9.0, and Cisco TelePresence Recording Server 1.8 and earlier allows remote attackers to cause a denial of service (networking outage or process crash) via (1) malformed IP packets, (2) a high rate of TCP connection requests, or (3) a high rate of TCP connection terminations, aka Bug IDs CSCti21830, CSCti21851, CSCtj19100, CSCtj19086, CSCtj19078, CSCty11219, CSCty11299, CSCty11323, and CSCty11338.

A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806.

The IronPort Spam Quarantine (ISQ) component in the web framework in IronPort AsyncOS on Cisco Email Security Appliance devices before 7.1.5-106 and 7.3, 7.5, and 7.6 before 7.6.3-019 and Content Security Management Appliance devices before 7.9.1-102 and 8.0 before 8.0.0-404 allows remote attackers to cause a denial of service (service crash or hang) via a high rate of TCP connection attempts, aka Bug IDs CSCzv25573 and CSCzv81712.

Cisco TelePresence TC Software before 6.1 and TE Software before 4.1.3 allow remote attackers to cause a denial of service (temporary device hang) via crafted SIP packets, aka Bug ID CSCuf89557.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 and 8.4, when SIP inspection is enabled, create many identical pre-allocated secondary pinholes, which might allow remote attackers to cause a denial of service (CPU consumption) via crafted SIP traffic, aka Bug ID CSCtz63143.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.

Cisco Sourcefire Snort 3.0 before build 233 has a Buffer Overread related to use of a decoder array. The size was off by one making it possible to read past the end of the array with an ether type of 0xFFFF. Increasing the array size solves this problem.

Cisco Intrusion Prevention System (IPS) Software on IPS NME devices before 7.0(9)E4 allows remote attackers to cause a denial of service (device reload) via malformed IPv4 packets that trigger incorrect memory allocation, aka Bug ID CSCua61977.

Cisco IOS XR before 4.2.1 on ASR 9000 series devices and CRS series devices allows remote attackers to cause a denial of service (packet transmission outage) via a crafted packet, aka Bug IDs CSCty94537 and CSCtz62593.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751.

A vulnerability in an internal API of the Cisco Meeting Server (CMS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected appliance. More Information: CSCvc89678. Known Affected Releases: 2.1. Known Fixed Releases: 2.1.2.

A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198.

A vulnerability in the ICMP ingress packet processing of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause the TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation for the size of a received ICMP packet. An attacker could exploit this vulnerability by sending a crafted ICMP packet to the local IP address of the targeted endpoint. A successful exploit could allow the attacker to cause a DoS of the TelePresence endpoint, during which time calls could be dropped. This vulnerability would affect either IPv4 or IPv6 ICMP traffic. This vulnerability affects the following Cisco TelePresence products when running software release CE8.1.1, CE8.2.0, CE8.2.1, CE8.2.2, CE 8.3.0, or CE8.3.1: Spark Room OS, TelePresence DX Series, TelePresence MX Series, TelePresence SX Quick Set Series, TelePresence SX Series. Cisco Bug IDs: CSCvb95396.

A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385.