NetSupport Manager Client before 10.20.0004 allows remote attackers to bypass the (1) basic and (2) authentication schemes by spoofing the NetSupport Manager.

TIBCO Enterprise Administrator 1.0.0 and Enterprise Administrator SDK 1.0.0 do not properly enforce administrative authentication requirements, which allows remote attackers to execute arbitrary commands via unspecified vectors.

The Java Glassfish Admin Console in HP Executive Scorecard 9.40 and 9.41 does not require authentication, which allows remote attackers to execute arbitrary code via a session on TCP port 10001, aka ZDI-CAN-2116.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.

An issue was discovered in OpenAFS before 1.6.23 and 1.8.x before 1.8.2. The backup tape controller (butc) process accepts incoming RPCs but does not require (or allow for) authentication of those RPCs. Handling those RPCs results in operations being performed with administrator credentials, including dumping/restoring volume contents and manipulating the backup database. For example, an unauthenticated attacker can replace any volume's content with arbitrary data.

Unify OpenStage/OpenScape Desk Phone IP SIP before V3 R3.11.0 has an authentication bypass in the default mode of the Workpoint Interface

The wp-support-plus-responsive-ticket-system plugin before 4.2 for WordPress has incorrect authentication.

When using the CAS Proxy ticket authentication from Spring Security 3.1 to 3.2.4 a malicious CAS Service could trick another CAS Service into authenticating a proxy ticket that was not associated. This is due to the fact that the proxy ticket authentication uses the information from the HttpServletRequest which is populated based upon untrusted information within the HTTP request. This means if there are access control restrictions on which CAS services can authenticate to one another, those restrictions can be bypassed. If users are not using CAS Proxy tickets and not basing access control decisions based upon the CAS Service, then there is no impact to users.

By using a specific credential string, an attacker with network access to the device’s web interface could circumvent the authentication scheme and perform administrative operations.

The administrative interface in Allied Telesis AT-RG634A ADSL Broadband router 3.3+, iMG624A firmware 3.5, iMG616LH firmware 2.4, and iMG646BD firmware 3.5 allows remote attackers to gain privileges and execute arbitrary commands via a direct request to cli.html.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

An insecure transport protocol used by Drobo Dashboard API on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows attackers to intercept network traffic.

Entes EMG12 versions 2.57 and prior The application uses a web interface where it is possible for an attacker to bypass authentication with a specially crafted URL. This could allow for remote code execution.

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

ABB eSOMS version 6.0.2 may allow unauthorized access to the system when LDAP is set to allow anonymous authentication, and specific key values within the eSOMS web.config file are present. Both conditions are required to exploit this vulnerability.

Grafana 2.x, 3.x, and 4.x before 4.6.4 and 5.x before 5.2.3 allows authentication bypass because an attacker can generate a valid "remember me" cookie knowing only a username of an LDAP or OAuth user.

The National Payments Corporation of India BHIM application 1.3 for Android uses a custom keypad for which the input element is available to the Accessibility service, which makes it easier for attackers to bypass authentication.

Incorrect access control in the Dashboard API on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows attackers to bypass authentication due to insecure token generation.

SaltStack Salt before 2017.7.8 and 2018.3.x before 2018.3.3 allow remote attackers to bypass authentication and execute arbitrary commands via salt-api(netapi).

In DouCo DouPHP v1.5 Release 20190516, remote attackers can view the database backup file via a brute-force guessing approach for data/backup/DyyyymmddThhmmss.sql filenames.

A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The FTP and RTSP services make it easier for attackers to conduct brute-force authentication attacks, because failed-authentication limits apply only to HTTP (not FTP or RTSP).

Cobham Satcom Sailor 250 and 500 devices before 1.25 contained an unauthenticated password reset vulnerability. This could allow modification of any user account's password (including the default "admin" account), without prior knowledge of their password. All that is required is knowledge of the username and attack vector (/index.lua?pageID=Administration usernameAdmChange, passwordAdmChange1, and passwordAdmChange2 fields).

The TIBCO Spotfire authentication component of TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace, and TIBCO Spotfire Server contains a vulnerability in the handling of the authentication that theoretically may allow an attacker to gain full access to a target account, independent of configured authentication mechanisms. Affected releases are TIBCO Software Inc. TIBCO Spotfire Analytics Platform for AWS Marketplace: versions up to and including 10.0.0, and TIBCO Spotfire Server: versions up to and including 7.10.1; 7.11.0; 7.11.1; 7.12.0; 7.13.0; 7.14.0.

A lack of authentication, in CA Unified Infrastructure Management 8.5.1, 8.5, and 8.4.7, allows remote attackers to conduct a variety of attacks, including file reading/writing.

Adobe Connect versions 9.7.5 and earlier have an Authentication Bypass vulnerability. Successful exploitation could lead to session hijacking.

Unspecified vulnerability in HP Select Identity 4.01 through 4.01.010 and 4.10 through 4.13.001 allows remote attackers to obtain unspecified access via unknown vectors.

A remote attacker can bypass the System Manager Mode on the Canon LBP6030w web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

On TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 171019 Rel.55346n devices, all actions in the web interface are affected by bypass of authentication via an HTTP request.

Hycus CMS 1.0.4 allows Authentication Bypass via "'=' 'OR'" credentials.

SV3C L-SERIES HD CAMERA V2.3.4.2103-S50-NTD-B20170508B devices improperly identifies users only by the authentication level sent in the cookies, which allow remote attackers to bypass authentication and gain administrator access by setting the authLevel cookie to 255.

The Symantec Messaging Gateway product prior to 10.6.6 may be susceptible to an authentication bypass exploit, which is a type of issue that can allow attackers to potentially circumvent security mechanisms currently in place and gain access to the system or network.

A remote attacker can bypass the Management Mode on the Canon LBP7110Cw web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

FURUNO FELCOM 250 and 500 devices use only client-side JavaScript in login.js for authentication.

IBM FlashSystem 900 product GUI allows a specially crafted attack to bypass the authentication requirements of the system, resulting in the ability to remotely change the superuser password. This can be used by an attacker to gain administrative control or to deny service. IBM X-Force ID: 150296.

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

Circontrol CirCarLife all versions prior to 4.3.1, authentication to the device can be bypassed by entering the URL of a specific page.

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

Meross MSS110 devices through 1.1.24 contain an unauthenticated admin.htm administrative interface.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

Java remote method invocation (RMI) input port in GE MDS PulseNET and MDS PulseNET Enterprise version 3.2.1 and prior may be exploited to allow unauthenticated users to launch applications and support remote code execution through web services.

Due to incorrect access control in Neo4j Enterprise Database Server 3.4.x before 3.4.9, the setting of LDAP for authentication with STARTTLS, and System Account for authorization, allows an attacker to log into the server by sending any valid username with an arbitrary password.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.