INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0670.

Buffer overflow in INplc-RT 3.08 and earlier allows remote attackers to cause denial-of-service (DoS) condition that may result in executing arbtrary code via unspecified vectors.

It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.

A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with network access to the SiPass integrated server to bypass the authentication mechanism and perform administrative operations.

admin.php in Internet Photoshow and Internet Photoshow Special Edition (SE) allows remote attackers to bypass authentication by setting the login_admin cookie to true.

The TLS session cache in FreeRADIUS 2.1.1 through 2.1.7, 3.0.x before 3.0.14, 3.1.x before 2017-02-04, and 4.0.x before 2017-02-04 fails to reliably prevent resumption of an unauthenticated session, which allows remote attackers (such as malicious 802.1X supplicants) to bypass authentication via PEAP or TTLS.

NetIQ eDirectory before 9.0 SP4 did not enforce login restrictions when "ebaclient" was used, allowing unpermitted access to eDirectory services.

An issue was discovered in SMA Solar Technology products. An attacker can use Sunny Explorer or the SMAdata2+ network protocol to update the device firmware without ever having to authenticate. If an attacker is able to create a custom firmware version that is accepted by the inverter, the inverter is compromised completely. This allows the attacker to do nearly anything: for example, giving access to the local OS, creating a botnet, using the inverters as a stepping stone into companies, etc. NOTE: the vendor reports that this attack has always been blocked by "a final integrity and compatibility check." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in.

A vulnerability was identified in Industrial Application Software IAS Canias ERP 8.03. This issue affects the function iasServerRemoteInterface.doAction of the component Java RMI Session Management. Such manipulation leads to improper authentication. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

A vulnerability was determined in Technostrobe HI-LED-WR120-G2 5.5.0.1R6.03.30. The affected element is the function index_config of the file /LoginCB. This manipulation causes improper authentication. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Geyser is a bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition. Versions of Geyser prior to 1.4.2-SNAPSHOT allow anyone that can connect to the server to forge a LoginPacket with manipulated JWT token allowing impersonation as any user. Version 1.4.2-SNAPSHOT contains a patch for the issue. There are no known workarounds aside from upgrading.

A security vulnerability has been detected in JeecgBoot 3.9.0/3.9.1. The impacted element is an unknown function of the file jeecg-boot/jeecg-module-system/jeecg-system-biz/src/main/java/org/jeecg/modules/airag/JeecgBizToolsProvider.java of the component AI Chat Module. Such manipulation leads to missing authentication. The attack can be executed remotely. The name of the patch is b7c9aeba7aefda9e008ea8fe4fc3daf08d0c5b39/2c1cc88b8d983868df8c520a343d6ff4369d9e59. It is best practice to apply a patch to resolve this issue. The project fixed the issue with a commit which shall be part of the next official release.

An improper authentication vulnerability has been reported to affect QNAP NAS running Kazoo Server. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Kazoo Server: Kazoo Server 4.11.22 and later

Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.

WP Cerber before 8.9.3 allows MFA bypass via wordpress_logged_in_[hash] manipulation.

The WS-SP UsernameToken policy in Apache CXF 2.4.5 and 2.5.1 allows remote attackers to bypass authentication by sending an empty UsernameToken as part of a SOAP request.

PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password.

Schneider Electric Modicon Quantum PLC does not perform authentication between the Unity software and PLC, which allows remote attackers to cause a denial of service or possibly execute arbitrary code via unspecified vectors.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur.

xrdp 0.9.1 calls the PAM function auth_start_session() in an incorrect location, leading to PAM session modules not being properly initialized, with a potential consequence of incorrect configurations or elevation of privileges, aka a pam_limits.so bypass.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

An Authentication Bypass (CWE-287) vulnerability in ESMAC (aka Enterprise Server Monitor and Control) in Micro Focus Enterprise Developer and Enterprise Server 2.3 and earlier, 2.3 Update 1 before Hotfix 8, and 2.3 Update 2 before Hotfix 9 allows remote unauthenticated attackers to view and alter configuration information and alter the state of the running product (CWE-275).

FURUNO FELCOM 250 and 500 devices use only client-side JavaScript in login.js for authentication.

A flaw was found in Apache ShenYu Admin. The incorrect use of JWT in ShenyuAdminBootstrap allows an attacker to bypass authentication. This issue affected Apache ShenYu 2.3.0 and 2.4.0

The web interface in McAfee Firewall Reporter before 5.1.0.13 does not properly implement cookie authentication, which allows remote attackers to obtain access, and disable anti-virus functionality, via an HTTP request.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

An authentication bypass by capture-replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.

There is an improper authentication vulnerability in Hero-CT060 before 1.0.0.200. The vulnerability is due to that when an user wants to do certain operation, the software does not insufficiently validate the user's identity. Successful exploit could allow the attacker to do certain operations which the user are supposed not to do.

Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.

A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

functions.php in Ragnarok Online Control Panel (ROCP) 4.3.4a allows remote attackers to bypass authentication by requesting account_manage.php with a trailing "/login.php" PHP_SELF value, which is not properly handled by the CHECK_AUTH function.

Couchbase Server 6.5.x and 6.6.x through 6.6.2 has Incorrect Access Control. Externally managed users are not prevented from using an empty password, per RFC4513.

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

In EMC Avamar Server Software 7.3.1-125, 7.3.0-233, 7.3.0-226, 7.2.1-32, 7.2.1-31, 7.2.0-401, an unauthenticated remote attacker may potentially bypass the authentication process to gain access to the system maintenance page. This may be exploited by an attacker to view sensitive information, perform software updates, or run maintenance workflows.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

TYPO3 before 4.3.12, 4.4.x before 4.4.9, and 4.5.x before 4.5.4 allows remote attackers to bypass authentication mechanisms in the backend through a crafted request.

Hands-on Vulnerability Learning Tool "AppGoat" for Web Application V3.0.0 and earlier allows remote attackers to bypass authentication to perform arbitrary operations via unspecified vectors.