The web server on the Siemens Scalance S Security Module firewall S602 V2, S612 V2, and S613 V2 with firmware before 2.3.0.3 does not limit the rate of authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack on the administrative password.

EMC Isilon InsightIQ 4.1.0, 4.0.1, 4.0.0, 3.2.2, 3.2.1, 3.2.0, 3.1.1, 3.1.0, 3.0.1, 3.0.0 is affected by an authentication bypass vulnerability that could potentially be exploited by attackers to compromise the affected system.

JabberD 2.x (aka jabberd2) before 2.6.1 allows anyone to authenticate using SASL ANONYMOUS, even when the sasl.anonymous c2s.xml option is not enabled.

The WS-SP UsernameToken policy in Apache CXF 2.4.5 and 2.5.1 allows remote attackers to bypass authentication by sending an empty UsernameToken as part of a SOAP request.

GbScriptAddUp.asp in Advantech/BroadWin WebAccess before 7.0 does not properly perform authentication, which allows remote attackers to execute arbitrary code via unspecified vectors.

The TELNET daemon in Siemens WinCC flexible 2004, 2005, 2007, and 2008; WinCC V11 (aka TIA portal); the TP, OP, MP, Comfort Panels, and Mobile Panels SIMATIC HMI panels; WinCC V11 Runtime Advanced; and WinCC flexible Runtime does not perform authentication, which makes it easier for remote attackers to obtain access via a TCP session.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

Sangoma NetBorder / Vega Session Controller before 2.3.12-80-GA allows remote attackers to execute arbitrary commands via the web interface.

Unspecified vulnerability in Trend Micro ServerProtect 5.7 and 5.58 allows remote attackers to execute arbitrary code via vectors related to obtaining "administrative access to the RPC interface."

IBM WebSphere Commerce 6.x through 6.0.0.11 and 7.x through 7.0.0.3 does not properly implement Activity Token authentication for Web Services, which has unspecified impact and attack vectors.

In OpenBMC 2.9, crafted IPMI messages allow an attacker to bypass authentication and gain full control of the system.

TCPUploadServer.exe in Progea Movicon 11.2 before Build 1084 does not require authentication for critical functions, which allows remote attackers to obtain sensitive information, delete files, execute arbitrary programs, or cause a denial of service (crash) via a crafted packet to TCP port 10651.

Symantec Reporter 9.5 prior to 9.5.4.1 and 10.1 prior to 10.1.5.5 does not restrict excessive authentication attempts for management interface users. A remote attacker can use brute force search to guess a user password and gain access to Reporter.

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.

Symantec Ghost Solution Suite 1.1 before 1.1 patch 2, 2.0.0, and 2.0.1 does not authenticate connections between the console and the Ghost Management Agent, which allows remote attackers to execute arbitrary commands via unspecified RPC requests in conjunction with ARP spoofing.

On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.

SYN Flood or FIN Flood attack in ECos 1 and other versions embedded devices results in web Authentication Bypass. "eCos Embedded Web Servers used by Multiple Routers and Home devices, while sending SYN Flood or FIN Flood packets fails to validate and handle the packets and does not ask for any sign of authentication resulting in Authentication Bypass. An attacker can take complete advantage of this bug and take over the device remotely or locally. The bug has been successfully tested and reproduced in some versions of SOHO Routers manufactured by TOTOLINK, GREATEK and others."

Dataprobe iBootBar (with 2007-09-20 and possibly later released firmware) allows remote attackers to bypass authentication, and conduct power-cycle attacks on connected devices, via a DCRABBIT cookie.

Dataprobe iBootBar (with 2007-09-20 and possibly later beta firmware) allows remote attackers to bypass authentication, and conduct power-cycle attacks on connected devices, via a DCCOOKIE cookie.

Sitefinity 5.1, 5.2, 5.3, 5.4, 6.x, 7.x, 8.x, 9.x, and 10.x allow remote attackers to bypass authentication and consequently cause a denial of service on load balanced sites or gain privileges via vectors related to weak cryptography.

In Joomla! before 3.8.2, a bug allowed third parties to bypass a user's 2-factor authentication method.

Improper authentication of Non-EAPOL/WAPI plaintext frames during four-way handshake can lead to arbitrary network packet injection in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music

The Vonage Motorola Phone Adapter VT 2142-VD does not properly verify that a SIP INVITE message originated from a legitimate server, which allows remote attackers to send spoofed INVITE messages, as demonstrated by a flood of messages triggering a denial of service, and by phone calls with malicious content.

index.php in FTP Admin 0.1.0 allows remote attackers to bypass authentication and obtain administrative access via a loggedin parameter with a value of true, as demonstrated by adding a user account.

Unspecified vulnerability in main.php of BugHotel Reservation System before 4.9.9 P3 allows remote attackers to bypass authentication and gain administrative access via unspecified vectors. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

DenyAll WAF before 6.4.1 allows unauthenticated remote attackers to obtain authentication information by making a typeOf=debug request to /webservices/download/index.php, and then reading the iToken field in the reply. This affects DenyAll i-Suite LTS 5.5.0 through 5.5.12, i-Suite 5.6, Web Application Firewall 5.7, and Web Application Firewall 6.x before 6.4.1, with On Premises or AWS/Azure cloud deployments.

GE Xeleris versions 1.0,1.1,2.1,3.0,3.1, medical imaging systems, all current versions are affected, these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

Unspecified vulnerability in HP Select Identity 4.01 through 4.01.010 and 4.10 through 4.13.001 allows remote attackers to obtain unspecified access via unknown vectors.

An issue was discovered on FiberHome User End Routers Bearing Model Number AN1020-25 which could allow an attacker to easily restore a router to its factory settings by simply browsing to the link http://[Default-Router-IP]/restoreinfo.cgi & execute it. Due to improper authentication on this page, the software accepts the request hence allowing attacker to reset the router to its default configurations which later could allow attacker to login to router by using default username/password.

The Thomson/Alcatel SpeedTouch 7G router, as used for the BT Home Hub 6.2.6.B and earlier, allows remote attackers on an intranet to bypass authentication and gain administrative access via vectors including a '/' (slash) character at the end of the PATH_INFO to cgi/b, aka "double-slash auth bypass." NOTE: remote attackers outside the intranet can exploit this by leveraging a separate CSRF vulnerability. NOTE: SpeedTouch 780 might also be affected by some of these issues.

Multiple command handlers in CA (Computer Associates) BrightStor ARCserve Backup for Laptops and Desktops r11.0 through r11.5 do not verify if a peer is authenticated, which allows remote attackers to add and delete users, and start client restores.

NetSupport Manager Client before 10.20.0004 allows remote attackers to bypass the (1) basic and (2) authentication schemes by spoofing the NetSupport Manager.

The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.

GE Infinia/Infinia with Hawkeye 4 medical imaging systems all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

The login method in LoginModule implementations in Apache Geronimo 2.0 does not throw FailedLoginException for failed logins, which allows remote attackers to bypass authentication requirements, deploy arbitrary modules, and gain administrative access by sending a blank username and password with the command line deployer in the deployment module.

Mahara 15.04 before 15.04.8 and 15.10 before 15.10.4 and 16.04 before 16.04.2 are vulnerable to some authentication methods, which do not use Mahara's built-in login form, still allowing users to log in even if their institution was expired or suspended.

The telnet service in LevelOne WBR-3460 4-Port ADSL 2/2+ Wireless Modem Router with firmware 1.00.11 and 1.00.12 does not require authentication, which allows remote attackers on the local or wireless network to obtain administrative access.

Session fixation vulnerability in HP Systems Insight Manager (SIM) 4.2 and 5.0 SP4 and SP5 allows remote attackers to hijack web sessions by setting the JSESSIONID cookie.

A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2.

OmniAuth OmnitAuth-SAML 1.9.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors.

OneLogin Ruby-SAML 1.6.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

Oracle, GlassFish Server Open Source Edition 3.0.1 (build 22) is vulnerable to Java Key Store Password Disclosure vulnerability, that makes it possible to provide an unauthenticated attacker plain text password of administrative user and grant access to the web-based administration interface.

webSPELL 4.0, and possibly later versions, allows remote attackers to bypass authentication via a ws_auth cookie, a different vulnerability than CVE-2006-4782.

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time

Unspecified vulnerability in a cryptographic feature in MailEnable Standard Edition before 1.93, Professional Edition before 1.73, and Enterprise Edition before 1.21 leads to "weakened authentication security" with unknown impact and attack vectors. NOTE: due to lack of details, it is not clear whether this is the same as CVE-2006-1792.

The GemFire broker for Cloud Foundry 1.6.x before 1.6.5 and 1.7.x before 1.7.1 has multiple API endpoints which do not require authentication and could be used to gain access to the cluster managed by the broker.

This vulnerability allows remote attackers to bypass authentication on affected installations of Commvault CommCell 11.22.22. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CVSearchService service. The issue results from the lack of proper validation prior to authentication. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-13706.

A vulnerability in the REST API interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to bypass authentication on an affected system. The vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on the affected system. The REST API is enabled by default and cannot be disabled.