A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A command injection issue in dji_sys in DJI Mavic 2 Remote Controller before firmware version 01.00.0510 allows for code execution via a malicious firmware upgrade packet.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

Dell EMC PowerStore versions prior to 1.0.3.0.5.006 contain an OS Command Injection vulnerability in PowerStore X environment . A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS command on the PowerStore underlying OS. Exploiting may lead to a system take over by an attacker.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain an improper input validation vulnerability. A user with the ISI_PRIV_CLUSTER privilege may exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

The QCMAP_CLI utility in the Qualcomm QCMAP software suite prior to versions released in October 2020 uses a system() call without validating the input, while handling a SetGatewayUrl() request. A local attacker with shell access can pass shell metacharacters and run arbitrary commands. If QCMAP_CLI can be run via sudo or setuid, this also allows elevating privileges to root. This version of QCMAP is used in many kinds of networking devices, primarily mobile hotspots and LTE routers.

This issue was addressed with improved checks. This issue is fixed in macOS Mojave 10.14.4. A local user may be able to execute arbitrary shell commands.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send specially crafted packet at 0x1ea48 to the extracted hostname value from the xml file that is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=<contents of ip node> using sprintf().

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below. The value of the fmgpon_loid parameter is used in a system call inside the boa binary. Because there is no user input validation, this leads to authenticated code execution on the device.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below, The values of the newpass and confpass parameters in /bin/WebMGR are used in a system call in the firmware. Because there is no user input validation, this leads to authenticated code execution on the device.

An issue was discovered on Systrome Cumilon ISG-600C, ISG-600H, and ISG-800W devices with firmware V1.1-R2.1_TRUNK-20181105.bin. A shell command injection occurs by editing the description of an ISP file. The file network/isp/isp_update_edit.php does not properly validate user input, which leads to shell command injection via the des parameter.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e87c the extracted hostname value from the xml file is used as an argument to /etc/config-tools/change_hostname hostname=<contents of hostname node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e840 the extracted ntp value from the xml file is used as an argument to /etc/config-tools/config_sntp time-server-%d=<contents of ntp node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many ntp entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). An attacker can send a specially crafted XML cache file At 0x1e8a8 the extracted domainname value from the xml file is used as an argument to /etc/config-tools/edit_dns_server domain-name=<contents of domainname node> using sprintf().This command is later executed via a call to system().

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS2 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS1 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). At 0x1e3f0 the extracted dns value from the xml file is used as an argument to /etc/config-tools/edit_dns_server %s dns-server-nr=%d dns-server-name=<contents of dns node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many dns entries will be parsed from the xml file.

Improper neutralization of special elements used in an OS command in Druva inSync Windows Client 6.5.0 allows a local, unauthenticated attacker to execute arbitrary operating system commands with SYSTEM privileges.

Dell EMC RecoverPoint versions prior to 5.1.3 and RecoverPoint for VMs versions prior to 5.2.0.2 contain an OS command injection vulnerability in the installation feature of Boxmgmt CLI. A malicious boxmgmt user may potentially be able to execute arbitrary commands as root.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system().

VNX Control Station in Dell EMC VNX2 OE for File versions prior to 8.1.9.236 contains OS command injection vulnerability. Due to inadequate restriction configured in sudores, a local authenticated malicious user could potentially execute arbitrary OS commands as root by exploiting this vulnerability.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e900 the extracted gateway value from the xml file is used as an argument to /etc/config-tools/config_default_gateway number=0 state=enabled value=<contents of gateway node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system().

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

OKER G232V1 v1.03.02.20161129 devices provide a root terminal on a UART serial interface without proper access control. This allows attackers with physical access to interrupt the boot sequence in order to execute arbitrary commands with root privileges and conduct further attacks.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

A vulnerability in the CLI of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input at the CLI. An attacker could exploit this vulnerability by authenticating with the administrator password via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges.

A vulnerability in the command-line interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker with read-only credentials to inject arbitrary commands that could allow them to obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input on the command-line interface. An attacker could exploit this vulnerability by authenticating with read-only privileges via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow an attacker to execute arbitrary commands on the device with root privileges.

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop Parallels Desktop version 14.1.3 (45485). An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Parallels Service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of root. Was ZDI-CAN-8685.

A vulnerability in the CLI of Cisco Aironet Series Access Points (APs) could allow an authenticated, local attacker to gain access to the underlying Linux operating system (OS) without the proper authentication. The attacker would need valid administrator device credentials. The vulnerability is due to improper validation of user-supplied input for certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input for a CLI command. A successful exploit could allow the attacker to obtain access to the underlying Linux OS without proper authentication.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying various CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with elevated privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected commands. An exploit could allow the attacker to gain root privileges on the affected device.