An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS2 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability.

A vulnerability was found in Tenda AC10U 15.03.06.48/15.03.06.49. It has been rated as critical. This issue affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257777 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted string, an attacker could modify the device name of an attached PLC adapter to inject and execute arbitrary commands on the system with root privileges.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

An issue was discovered on Tenda AC9 V15.03.05.19(6318)_CN and AC10 V15.03.06.23_CN devices. The mac parameter in a POST request is used directly in a doSystemCmd call, causing OS command injection.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetNetCheckTools. This vulnerability allows attackers to execute arbitrary commands via the hostName parameter.

Tenda AC18 router V15.03.05.19 and V15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the Mac parameter at ip/goform/WriteFacMac.

Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input.

Valve Source allows local users to gain privileges by writing to the /tmp/hl2_relaunch file, which is later executed in the context of a different user account.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.1.0.10, LTS2024 release Versions 7.13.1.0 through 7.13.1.25, LTS 2023 release versions 7.10.1.0 through 7.10.1.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the DDSH CLI. A low privileged attacker with local access could potentially exploit this vulnerability to execute arbitrary commands with root privileges.

Pi-hole 4.4 allows a user able to write to /etc/pihole/dns-servers.conf to escalate privileges through command injection (shell metacharacters after an IP address).

FUJITSU F-12C, ARROWS Tab LTE F-01D, ARROWS Kiss F-03D, and REGZA Phone T-01D for Android allows local users to execute arbitrary commands via unspecified vectors.

A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via operating system command injection.

pnpm is a package manager. Versions 6.25.0 through 10.26.2 have a Command Injection vulnerability when using environment variable substitution in .npmrc configuration files with tokenHelper settings. An attacker who can control environment variables during pnpm operations could achieve Remote Code Execution (RCE) in build environments. This issue is fixed in version 10.27.0.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in openEuler gala-gopher on Linux allows Command Injection. This vulnerability is associated with program files https://gitee.Com/openeuler/gala-gopher/blob/master/src/probes/extends/ebpf.Probe/src/ioprobe/ioprobe.C. This issue affects gala-gopher: through 1.0.2.

Command injection vulnerability in Movistar 4G router affecting version ES_WLD71-T1_v2.0.201820. This vulnerability allows an authenticated user to execute commands inside the router by making a POST request to the URL '/cgi-bin/gui.cgi'.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_cifssupport utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability within its svc_cbr utility. An authenticated malicious user with local access could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability within its svc_udoctor utility. An authenticated malicious user with local access could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

Terminal 1.3 in Apple Mac OS X 10.2 allows remote attackers to execute arbitrary commands via shell metacharacters in a telnet:// link, which is executed by Terminal.app window.

This issue was addressed with improved checks. This issue is fixed in macOS Mojave 10.14.4. A local user may be able to execute arbitrary shell commands.

A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.

An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below, The values of the newpass and confpass parameters in /bin/WebMGR are used in a system call in the firmware. Because there is no user input validation, this leads to authenticated code execution on the device.

A command injection vulnerability has been reported to affect several QNAP operating system versions. If an attacker gains local network access who have also gained a user account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QTS 5.1.9.2954 build 20241120 and later QTS 5.2.3.3006 build 20250108 and later QuTS hero h5.1.9.2954 build 20241120 and later QuTS hero h5.2.3.3006 build 20250108 and later

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e9fc the extracted subnetmask value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=<contents of subnetmask node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send specially crafted packet at 0x1ea48 to the extracted hostname value from the xml file that is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=<contents of ip node> using sprintf().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e9fc the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). This command is later executed via a call to system().

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e840 the extracted ntp value from the xml file is used as an argument to /etc/config-tools/config_sntp time-server-%d=<contents of ntp node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many ntp entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 version 03.02.02(14). At 0x1e3f0 the extracted dns value from the xml file is used as an argument to /etc/config-tools/edit_dns_server %s dns-server-nr=%d dns-server-name=<contents of dns node> using sprintf(). This command is later executed via a call to system(). This is done in a loop and there is no limit to how many dns entries will be parsed from the xml file.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1e87c the extracted hostname value from the xml file is used as an argument to /etc/config-tools/change_hostname hostname=<contents of hostname node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file.At 0x1ea28 the extracted type value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=enabled config-type=<contents of type node> using sprintf(). This command is later executed via a call to system().

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e900 the extracted gateway value from the xml file is used as an argument to /etc/config-tools/config_default_gateway number=0 state=enabled value=<contents of gateway node> using sprintf(). This command is later executed via a call to system().

VNX Control Station in Dell EMC VNX2 OE for File versions prior to 8.1.9.236 contains OS command injection vulnerability. Due to inadequate restriction configured in sudores, a local authenticated malicious user could potentially execute arbitrary OS commands as root by exploiting this vulnerability.

An OS command injection vulnerability in the com.sprd.engineermode component in Doogee Note59, Note59 Pro, and Note59 Pro+ allows a local attacker to execute arbitrary code and escalate privileges via the EngineerMode ADB shell, due to incomplete patching of CVE-2025-31710

Improper neutralization of special elements used in an OS command in Druva inSync Windows Client 6.5.0 allows a local, unauthenticated attacker to execute arbitrary operating system commands with SYSTEM privileges.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter.

A vulnerability was found in KylinSoft kylin-software-properties on KylinOS. It has been rated as critical. This issue affects the function setMainSource. The manipulation leads to os command injection. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Upgrading to version 0.0.1-130 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-230687. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the CLI of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input at the CLI. An attacker could exploit this vulnerability by authenticating with the administrator password via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected.

An Improper Neutralization of Special Elements used in a Command vulnerability in one of FortiClient for Mac OS root processes, may allow a local user of the system on which FortiClient is running to execute unauthorized code as root by bypassing a security check.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with elevated privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected commands. An exploit could allow the attacker to gain root privileges on the affected device.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.