The vCenter Server contains an information disclosure vulnerability due to the logging of credentials in plaintext. A malicious actor with access to a workstation that invoked a vCenter Server Appliance ISO operation (Install/Upgrade/Migrate/Restore) can access plaintext passwords used during that operation.

The implementation of Brave Desktop's privacy-preserving analytics system (P3A) between 1.1 and 1.18.35 logged the timestamp of when the user last opened an incognito window, including Tor windows. The intended behavior was to log the timestamp for incognito windows excluding Tor windows. Note that if a user has P3A enabled, the timestamp is not sent to Brave's server, but rather a value from:Used in last 24hUsed in last week but not 24hUsed in last 28 days but not weekEver used but not in last 28 daysNever usedThe privacy risk is low because a local attacker with disk access cannot tell if the timestamp corresponds to a Tor window or a non-Tor incognito window.

A CWE-316: Cleartext Storage of Sensitive Information in Memory vulnerability exists in Easergy Builder V1.4.7.2 and prior which could allow an attacker access to login credentials.

Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, If Simple Mail Transfer Protocol (SMTP) account data is saved in RSLogix 500, a local attacker with access to a victim’s project may be able to gather SMTP server authentication data as it is written to the project file in cleartext.

A CWE-312: Cleartext Storage of Sensitive Information vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to read user credentials.

The Taidii Diibear Android application 2.4.0 and all its derivatives allow attackers to obtain user credentials from an Android backup because of insecure application configuration.

"BigFix Platform is storing clear text credentials within the system's memory. An attacker who is able to gain administrative privileges can use a program to create a memory dump and extract the credentials. These credentials can be used to pivot further into the environment. The principle of least privilege should be applied to all BigFix deployments, limiting administrative access."

IBM InfoSphere Master Data Management Server 11.0 - 11.6 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 125463.

Pilz PNOZmulti Configurator prior to version 10.9 allows an authenticated attacker with local access to the system containing the PNOZmulti Configurator software to view sensitive credential data in clear-text. This sensitive data is applicable to only the PMI m107 diag HMI device. An attacker with access to this sensitive data and physical access to the PMI m107 diag can modify data on the HMI device.

IBM UrbanCode Deploy (UCD) 6.2.7.9, 7.0.5.4, and 7.1.1.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 190908.

IBM StoredIQ 7.6.0.17 through 7.6.0.20 could disclose sensitive information to a local user due to data in certain directories not being encrypted when it contained symbolic links. IBM X-Force ID: 175133.

IBM Security Guardium Insights 2.0.2 stores user credentials in plain in clear text which can be read by a local privileged user. IBM X-Force ID: 184861.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores highly sensitive information in cleartext that could be obtained by a user. IBM X-Force ID: 179004.

IBM UrbanCode Deploy (UCD) 7.0.3.0, 7.0.4.0, 7.0.5.3, 7.0.5.4, 7.1.0.0, 7.1.1.0, 7.1.1.1, and 7.1.1.2, stores keystore passwords in plain text after a manual edit, which can be read by a local user. IBM X-Force ID: 191944.

The ownCloud application before 2.15 for Android allows attackers to use adb to include a PIN preferences value in a backup archive, and consequently bypass the PIN lock feature by restoring from this archive.

The Taidii Diibear Android application 2.4.0 and all its derivatives allow attackers to obtain user credentials from Shared Preferences and the SQLite database because of insecure data storage.

A flaw was found in Ceph-ansible v4.0.41 where it creates an /etc/ceph/iscsi-gateway.conf with insecure default permissions. This flaw allows any user on the system to read sensitive information within this file. The highest threat from this vulnerability is to confidentiality.

A flaw was found in ceph in versions prior to 16.y.z where ceph stores mgr module passwords in clear text. This can be found by searching the mgr logs for grafana and dashboard, with passwords visible.

Jenkins Zephyr for JIRA Test Management Plugin 1.5 and earlier stores its credentials in plain text in a global configuration file on the Jenkins master file system.

Jenkins ElasTest Plugin 1.2.1 and earlier stores its server password unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

NCH Quorum v2.03 and earlier allows local users to discover cleartext login information relating to users by reading the local .dat configuration files.

An issue was discovered on Nescomed Multipara Monitor M1000 devices. The onboard Flash memory stores data in cleartext, without integrity protection against tampering.

Due to usernames/passwords being stored in plaintext in Random Access Memory (RAM), a local, authenticated attacker could gain access to certain credentials, including Windows Logon credentials.

An issue was discovered in WiZ Colors A60 1.14.0. Wi-Fi credentials are stored in cleartext in flash memory, which presents an information-disclosure risk for a discarded or resold device.

IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.22.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 281429.

IBM QRadar Suite Software 1.10.12.0 through 1.10.23.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 281430.

In Saleor Storefront before version 2.10.3, request data used to authenticate customers was inadvertently cached in the browser's local storage mechanism, including credentials. A malicious user with direct access to the browser could extract the email and password. In versions prior to 2.10.0 persisted the cache even after the user logged out. This is fixed in version 2.10.3. A workaround is to manually clear application data (browser's local storage) after logging into Saleor Storefront.

A local, low-privileged attacker can learn the password of the connected controller in PLC Designer V4 due to an incorrect implementation that results in the password being displayed in plain text under special conditions.

A vulnerability has been identified in SIMATIC STEP 7 (TIA Portal) (All versions < V19). An information disclosure vulnerability could allow a local attacker to gain access to the access level password of the SIMATIC S7-1200 and S7-1500 CPUs, when entered by a legitimate user in the hardware configuration of the affected application.

Dell PowerScale OneFS, 9.0.0.x-9.4.0.x, contain a cleartext storage of sensitive information vulnerability in S3 component. An authenticated local attacker could potentially exploit this vulnerability, leading to information disclosure.

A Cleartext Storage of Sensitive Information vulnerability in suppportutils of SUSE Linux Enterprise Server 12, SUSE Linux Enterprise Server 15, SUSE Linux Enterprise Server 15 SP3 allows attackers that get access to the support logs to gain knowledge of the stored credentials This issue affects: SUSE Linux Enterprise Server 12 supportutils version 3.0.10-95.51.1CWE-312: Cleartext Storage of Sensitive Information and prior versions. SUSE Linux Enterprise Server 15 supportutils version 3.1.21-150000.5.44.1 and prior versions. SUSE Linux Enterprise Server 15 SP3 supportutils version 3.1.21-150300.7.35.15.1 and prior versions.

qtnx 0.9 stores non-custom SSH keys in a world-readable configuration file. If a user has a world-readable or world-executable home directory, another local system user could obtain the private key used to connect to remote NX sessions.

A cleartext storage of sensitive information vulnerability exists in PcVue versions 8.10 through 15.2.3. This could allow an unauthorized user with access the email and short messaging service (SMS) accounts configuration files to discover the associated simple mail transfer protocol (SMTP) account credentials and the SIM card PIN code. Successful exploitation of this vulnerability could allow an unauthorized user access to the underlying email account and SIM card.

NVIDIA BMC stores user passwords in an obfuscated form in a database accessible by the host. This may lead to a credentials exposure.

Cleartext Storage of Sensitive Information Vulnerability in GX Works2 all versions allows an attacker to disclose credential information stored in plaintext from project files. As a result, the attacker may be able to open project files protected by user authentication using disclosed credential information, and obtain or modify project information.

NCH Express Accounts 8.24 and earlier allows local users to discover the cleartext password by reading the configuration file.

An issue was discovered in WiZ Colors A60 1.14.0. API credentials are locally logged.

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

IBM Jazz for Service Management 1.1.3.10 and IBM Tivoli Netcool/OMNIbus_GUI displays user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 207610.

IBM MQ 7.5, 8.0, 9.0 LTS, 9.1 CD, and 9.1 LTS stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 211403.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 213554.

IBM Security Key Lifecycle Manager 3.0 and 3.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 166627.

The configuration file stores credentials in cleartext. An attacker with local access rights can read or modify the configuration file, potentially resulting in the service being abused due to sensitive information exposure.

PRIMX ZoneCentral before 6.1.2236 on Windows sometimes leaks the plaintext of NTFS files. On non-SSD devices, this is limited to a 5-second window and file sizes less than 600 bytes. The effect on SSD devices may be greater.

The local iLabClient database in itech iLabClient 3.7.1 allows local attackers to read cleartext credentials (from the CONFIGS table) for their servers configured in the client.

Navidrome is an open source web-based music collection server and streamer. Navidrome stores the JWT secret in plaintext in the navidrome.db database file under the property table. This practice introduces a security risk because anyone with access to the database file can retrieve the secret. This vulnerability is fixed in 0.54.1.

EasyLobby Solo could allow a local attacker to obtain sensitive information, caused by the storing of the social security number in plaintext. By visiting the kiosk and viewing the Visitor table of the database, an attacker could exploit this vulnerability to view stored social security numbers.

IBM Java Security Components in IBM SDK, Java Technology Edition 8 before SR1 FP10, 7 R1 before SR3 FP10, 7 before SR9 FP10, 6 R1 before SR8 FP7, 6 before SR16 FP7, and 5.0 before SR16 FP13 stores plaintext information in memory dumps, which allows local users to obtain sensitive information by reading a file.

An flaw was found in the OpenStack Platform (RHOSP) director, a toolset for installing and managing a complete RHOSP environment. Plaintext passwords may be stored in log files, which can expose sensitive information to anyone with access to the logs.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 could allow a local attacker to obtain clear text password in a trace file caused by improper handling of some datasource custom properties. IBM X-Force ID: 144346.