UpdateAgent in Lenovo Accelerator Application allows man-in-the-middle attackers to execute arbitrary code by spoofing an update response from susapi.lenovomm.com.
In Lenovo xClarity Administrator versions earlier than 2.1.0, an attacker that gains access to the underlying LXCA file system user may be able to retrieve a credential store containing the service processor user names and passwords for servers previously managed by that LXCA instance, and potentially decrypt those credentials more easily than intended.
In System Management Module (SMM) versions prior to 1.06, a field in the header of SMM firmware update images is insufficiently sanitized, allowing post-authentication command injection on the SMM as the root user.
In System Management Module (SMM) versions prior to 1.06, the SMM certificate creation and parsing logic is vulnerable to post-authentication command injection.
A potential vulnerability was discovered in LCFC BIOS for some Lenovo consumer notebook models that could allow a local attacker with elevated privileges under certain conditions the ability to enumerate Embedded Controller (EC) commands.
A potential vulnerability was discovered in LCFC BIOS for some Lenovo consumer notebook models that could allow a local attacker with elevated privileges to view incoming and returned data from SMI.
A vulnerability was identified in Lenovo XClarity Administrator (LXCA) before 1.4.0 where LXCA user account names may be exposed to unauthenticated users with access to the LXCA web user interface. No password information of the user accounts is exposed.
An information disclosure vulnerability was reported in Lenovo XClarity Administrator (LXCA) versions prior to 2.6.6 that could allow unauthenticated access to some configuration files which may contain usernames, license keys, IP addresses, and encrypted password hashes.
A vulnerability reported in Lenovo Solution Center version 03.12.003, which is no longer supported, could allow log files to be written to non-standard locations, potentially leading to privilege escalation. Lenovo ended support for Lenovo Solution Center and recommended that customers migrate to Lenovo Vantage or Lenovo Diagnostics in April 2018.
Lenovo SHAREit before 3.2.0 for Windows and SHAREit before 3.5.48_ww for Android transfer files in cleartext, which allows remote attackers to (1) obtain sensitive information by sniffing the network or (2) conduct man-in-the-middle (MITM) attacks via unspecified vectors.
The Wifi hotspot in Lenovo SHAREit before 3.2.0 for Windows allows remote attackers to obtain sensitive file names via a crafted file request to /list.
Lenovo USB Enhanced Performance Keyboard software before 2.0.2.2 includes active debugging code in SKHOOKS.DLL, which allows local users to obtain keypress information by accessing debug output.
A vulnerability was reported in Lenovo Vantage prior to version 10.2003.10.0 that could allow an authenticated user to read files on the system with elevated privileges.
Lenovo Chassis Management Module (CMM) prior to version 2.0.0 allows unauthenticated users to retrieve information related to the current authentication configuration settings. Exposed settings relate to password lengths, expiration, and lockout configuration.
An information disclosure vulnerability has been identified in the Lenovo App Store which may allow some applications to gain unauthorized access to sensitive user data used by other unrelated applications.
Lenovo Help Android mobile app versions earlier than 6.1.2.0327 allowed information to be transmitted over an HTTP channel, permitting others observing the channel to potentially see this information.
In Lenovo Connect2 versions earlier than 4.2.5.4885 for Windows and 4.2.5.3071 for Android, when an ad-hoc connection is made between two systems for the purpose of sharing files, the password for this ad-hoc connection will be stored in a user-readable location. An attacker with read access to the user's contents could connect to the Connect2 hotspot and see the contents of files while they are being transferred between the two systems.
In Lenovo Service Bridge before version 4, an insecure HTTP connection is used by LSB to send system serial number, machine type and model and product name to Lenovo's servers.
In NetIQ Sentinel before 8.1.x, a Sentinel user is logged into the Sentinel Web Interface. After performing some tasks within Sentinel the user does not log out but does go idle for a period of time. This in turn causes the interface to timeout so that it requires the user to re-authenticate. If another user is passing by and decides to login, their credentials are accepted. While The user does not inherit any of the other users privileges, they are able to view the previous screen. In this case it is possible that the user can see another users events or configuration information for whatever view is currently showing.
Photon microGUI in QNX Neutrino realtime operating system (RTOS) 6.1.0 and 6.2.0 allows attackers to read user clipboard information via a direct request to the 1.TEXT file in a directory whose name is a hex-encoded user ID.
Under certain conditions SAP Business Objects Business Intelligence Platform - versions 420, 430, allows an authenticated attacker to access information which would otherwise be restricted.
Cloud Foundry Bits Service, versions prior to 2.18.0, includes an information disclosure vulnerability. A remote malicious user may execute a timing attack to brute-force the signing key, allowing them complete read and write access to the the Bits Service storage.
In the Federation component of OpenStack Keystone before 11.0.4, 12.0.0, and 13.0.0, an authenticated "GET /v3/OS-FEDERATION/projects" request may bypass intended access restrictions on listing projects. An authenticated user may discover projects they have no authority to access, leaking all projects in the deployment and their attributes. Only Keystone with the /v3/OS-FEDERATION endpoint enabled via policy.json is affected.
The v1 API in OpenStack Glance Essex (2012.1), Folsom (2012.2), and Grizzly, when using the single-tenant Swift or S3 store, reports the location field, which allows remote authenticated users to obtain the operator's backend credentials via a request for a cached image.
A vulnerability was found in libpq, the default PostgreSQL client library where libpq failed to properly reset its internal state between connections. If an affected version of libpq was used with "host" or "hostaddr" connection parameters from untrusted input, attackers could bypass client-side connection security features, obtain access to higher privileged connections or potentially cause other impact through SQL injection, by causing the PQescape() functions to malfunction. Postgresql versions before 10.5, 9.6.10, 9.5.14, 9.4.19, and 9.3.24 are affected.
toucbase.ai before version 2.0 leaks information by not stripping exif data from images. Anyone with access to the uploaded image of other users could obtain its geolocation, device, and software version data etc (if present. The issue is fixed in version 2.0.
SimpleSAMLphp versions before 1.18.6 contain an information disclosure vulnerability. The module controller in `SimpleSAML\Module` that processes requests for pages hosted by modules, has code to identify paths ending with `.php` and process those as PHP code. If no other suitable way of handling the given path exists it presents the file to the browser. The check to identify paths ending with `.php` does not account for uppercase letters. If someone requests a path ending with e.g. `.PHP` and the server is serving the code from a case-insensitive file system, such as on Windows, the processing of the PHP code does not occur, and the source code is instead presented to the browser. An attacker may use this issue to gain access to the source code in third-party modules that is meant to be private, or even sensitive. However, the attack surface is considered small, as the attack will only work when SimpleSAMLphp serves such content from a file system that is not case-sensitive, such as on Windows. This issue is fixed in version 1.18.6.
A vulnerability in the web management interface of Cisco Secure Email and Web Manager, formerly Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an authenticated, remote attacker to retrieve sensitive information from a Lightweight Directory Access Protocol (LDAP) external authentication server connected to an affected device. This vulnerability is due to a lack of proper input sanitization while querying the external authentication server. An attacker could exploit this vulnerability by sending a crafted query through an external authentication web page. A successful exploit could allow the attacker to gain access to sensitive information, including user credentials from the external authentication server. To exploit this vulnerability, an attacker would need valid operator-level (or higher) credentials.
A vulnerability, which was classified as problematic, was found in ProjectSend r754. This affects an unknown part of the file process.php?do=zip_download. The manipulation of the argument client/file leads to information disclosure. It is possible to initiate the attack remotely.
Moodle 2.x through 2.1.10, 2.2.x before 2.2.8, 2.3.x before 2.3.5, and 2.4.x before 2.4.2 allows remote authenticated administrators to obtain sensitive information from the external repositories of arbitrary users by leveraging the login_as feature.
Full list of recipients from customer users in a contact field could be disclosed in notification emails event when the notification is set to be sent to each recipient individually. This issue affects: OTRS AG OTRSCustomContactFields 8.0.x version: 8.0.11 and prior versions.
Jenkins before versions 2.44, 2.32.2 is vulnerable to a user data leak in disconnected agents' config.xml API. This could leak sensitive data such as API tokens (SECURITY-362).
An unspecified vulnerability in the Lifecycle Query Engine of Jazz Reporting Service 6.0 through 6.0.4 could disclose highly sensitive information.
Insecure configuration of default ObjectMapper in com.vaadin:flow-server versions 3.0.0 through 3.0.5 (Vaadin 15.0.0 through 15.0.4) may expose sensitive data if the application also uses e.g. @RestController
A vulnerability in Cisco Jabber for Windows software could allow an authenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper validation of message contents. An attacker could exploit this vulnerability by sending specially crafted messages that contain Universal Naming Convention (UNC) links to a targeted user and convincing the user to follow the provided link. A successful exploit could allow the attacker to cause the application to access a remote system, possibly allowing the attacker to gain access to sensitive information that the attacker could use in additional attacks.
The configuration module in the backend in TYPO3 4.5.x before 4.5.19, 4.6.x before 4.6.12 and 4.7.x before 4.7.4 allows remote authenticated backend users to obtain the encryption key via unspecified vectors.
IBM iNotes 8.5 and 9.0 could allow a remote attacker to send a malformed email to a victim, that when opened could cause an information disclosure. IBM X-Force ID: 123854.
The Microsoft Server Block Message (SMB) on Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, and 1703, and Windows Server 2016, allows an information disclosure vulnerability in the way that it handles certain requests, aka "Windows SMB Information Disclosure Vulnerability".
IBM Kenexa LCMS Premier on Cloud 9.x and 10.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM Reference #: 1998874.
Nextcloud Server before 10.0.4 and 11.0.2 are vulnerable to disclosure of calendar and addressbook names to other logged-in users. Note that no actual content of the calendar and addressbook has been disclosed.
Mahara 15.04 before 15.04.13 and 16.04 before 16.04.7 and 16.10 before 16.10.4 and 17.04 before 17.04.2 are vulnerable to recording plain text passwords in the event_log table during the user creation process if full event logging was turned on.
IBM Sterling B2B Integrator Standard Edition 5.2 could allow an authenticated user with special privileges to view files that they should not have access to. IBM X-Force ID: 120275.
The MultiLink module 6.x-2.x before 6.x-2.7 and 7.x-2.x before 7.x-2.7 for Drupal does not properly check node permissions when generating an in-content link, which allows remote authenticated users with text-editing permissions to read arbitrary node titles via a generated link.
Grafana is an open-source platform for monitoring and observability. In affected versions when a data source has the Forward OAuth Identity feature enabled, sending a query to that datasource with an API token (and no other user credentials) will forward the OAuth Identity of the most recently logged-in user. This can allow API token holders to retrieve data for which they may not have intended access. This attack relies on the Grafana instance having data sources that support the Forward OAuth Identity feature, the Grafana instance having a data source with the Forward OAuth Identity feature toggled on, the Grafana instance having OAuth enabled, and the Grafana instance having usable API keys. This issue has been patched in versions 7.5.13 and 8.3.4.
IBM Rational ClearQuest 7.1.x before 7.1.2.7 and 8.x before 8.0.0.3, when ClearQuest Authentication is enabled, allows remote authenticated users to read password hashes via a user query.
The XSL Content portlet in Liferay Portal Community Edition (CE) 5.x and 6.x before 6.0.6 GA, when Apache Tomcat or Oracle GlassFish is used, allows remote authenticated users to read arbitrary (1) XSL and (2) XML files via a file:/// URL.
IBM Atlas eDiscovery Process Management 6.0.3 could allow an authenticated attacker to obtain sensitive information when an unsuspecting user clicks on unsafe third-party links. IBM X-Force ID: 126680.
Nextcloud is an open-source, self-hosted productivity platform The Nextcloud Mail application prior to versions 1.10.4 and 1.11.0 does by default not render images in emails to not leak the read state or user IP. The privacy filter failed to filter images with a relative protocol. It is recommended that the Nextcloud Mail application is upgraded to 1.10.4 or 1.11.0. There are no known workarounds aside from upgrading.
Open Ticket Request System (OTRS) before 3.0.0-beta6 adds email-notification-ext articles to tickets during processing of event-based notifications, which allows remote authenticated users to obtain potentially sensitive information by reading a ticket.
Unspecified vulnerability in Userpoints 6.x before 6.x-1.1, a module for Drupal, allows remote authenticated users with "View own userpoints" permissions to read the userpoint data of arbitrary users via unknown attack vectors.