A vulnerability in the web UI framework of Cisco IOS XE Software could allow an authenticated, remote attacker to make unauthorized changes to the filesystem of the affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by crafting a malicious file and uploading it to the device. An exploit could allow the attacker to gain elevated privileges on the affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

A vulnerability in Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a username with a malicious payload in the web UI and subsequently making a request to a specific endpoint in the web UI. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.

A vulnerability in the authorization subsystem of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to improper validation of user privileges of web UI users. An attacker could exploit this vulnerability by submitting a malicious payload to a specific endpoint in the web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

A vulnerability in the web-based management interface of Cisco Webex Video Mesh could allow an authenticated, remote attacker to execute arbitrary commands on the affected system. The vulnerability is due to improper validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrative privileges and supplying crafted requests to the application. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges on a targeted node.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system. When processed, the commands will be executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by providing malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as the root user.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

A vulnerability in the software update feature of Cisco Industrial Network Director could allow an authenticated, remote attacker to execute arbitrary code. The vulnerability is due to improper validation of files uploaded to the affected application. An attacker could exploit this vulnerability by authenticating to the affected system using administrator privileges and uploading an arbitrary file. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

A vulnerability in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the Web UI and then submitting that form. A successful exploit could allow the attacker to run arbitrary commands on the device with root privileges, which may lead to complete system compromise.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE), Cisco TelePresence Codec (TC), and Cisco RoomOS Software could allow an authenticated, remote attacker to escalate privileges to an unrestricted user of the restricted shell. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including specific arguments when opening an SSH connection to an affected device. A successful exploit could allow the attacker to gain unrestricted user access to the restricted shell of an affected device.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Unrestricted file upload vulnerability in the Custom Prompts upload implementation in Cisco Unified MeetingPlace 8.6(1.9) allows remote authenticated users to execute arbitrary code by using the languageShortName parameter to upload a file that provides shell access, aka Bug ID CSCus95712.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability in the Operations, Administration, Maintenance, and Provisioning (OAMP) credential reset functionality for Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the OAMP and sending a crafted HTTP request. A successful exploit could allow the attacker to gain administrator privileges. The attacker must successfully authenticate to the system to exploit this vulnerability. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) running software release 10.5, 11.0, or 11.5. Cisco Bug IDs: CSCve92752.

A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746.

The web-based GUI in Cisco Firepower Management Center 4.x and 5.x before 5.3.0.3, 5.3.1.x before 5.3.1.2, and 5.4.x before 5.4.0.1 and Cisco Adaptive Security Appliance (ASA) Software on 5500-X devices with FirePOWER Services 4.x and 5.x before 5.3.0.3, 5.3.1.x before 5.3.1.2, and 5.4.x before 5.4.0.1 allows remote authenticated users to increase user-account privileges via crafted HTTP requests, aka Bug ID CSCur25483.

Cisco Wireless LAN Controller (WLC) software, possibly 4.2 through 6.0, allows remote authenticated users to bypass intended access restrictions and modify the configuration, and possibly obtain administrative privileges, via unspecified vectors, a different vulnerability than CVE-2010-2843 and CVE-2010-3033.

Cisco Wireless LAN Controller (WLC) software, possibly 4.2 through 6.0, allows remote authenticated users to bypass intended access restrictions and modify the configuration, and possibly obtain administrative privileges, via unspecified vectors, a different vulnerability than CVE-2010-2842 and CVE-2010-2843.

The administrative web interface in Cisco TelePresence Video Communication Server Expressway X8.5.2 allows remote authenticated users to execute arbitrary commands via crafted fields, aka Bug ID CSCuv12531.

The web management interface on the Cisco RVS4000 Gigabit Security Router with software 1.x before 1.3.3.4 and 2.x before 2.0.2.7, and the WRVS4400N Gigabit Security Router with software before 2.0.2.1, allows remote authenticated users to execute arbitrary commands via the (1) ping test parameter or (2) traceroute test parameter, aka Bug ID CSCtn23871.

Cisco Video Communications Server (VCS) before X7.0.3 contains a command injection vulnerability which allows remote, authenticated attackers to execute arbitrary commands.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31659.

Unspecified vulnerability in Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 allows remote authenticated users to read or modify the device configuration, and gain privileges or cause a denial of service (device reload), via a (1) XML RPC or (2) XML RPC over HTTPS request, aka Bug ID CSCtb83618.

The web-based GUI in Cisco Firepower Management Center 4.x and 5.x before 5.3.1.2 and 5.4.x before 5.4.0.1 and Cisco Adaptive Security Appliance (ASA) Software on 5500-X devices with FirePOWER Services 4.x and 5.x before 5.3.1.2 and 5.4.x before 5.4.0.1 allows remote authenticated users to execute arbitrary commands as root via crafted HTTP requests, aka Bug ID CSCur25513.

The WebVPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permits the viewing of CIFS shares even when CIFS file browsing has been disabled, which allows remote authenticated users to bypass intended access restrictions via CIFS requests, aka Bug ID CSCsz80777.

SQL injection vulnerability in Cisco WebEx Meetings Server 2.6 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCuy83200.

The API web interface in Cisco Prime Infrastructure before 3.1 and Cisco Evolved Programmable Network Manager before 1.2.4 allows remote authenticated users to bypass intended RBAC restrictions and obtain sensitive information, and consequently gain privileges, via crafted JSON data, aka Bug ID CSCuy12409.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.

The RBAC implementation in Cisco ASA-CX Content-Aware Security software before 9.3.1.1(112) and Cisco Prime Security Manager (PRSM) software before 9.3.1.1(112) allows remote authenticated users to change arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuo94842.

Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3h) and 1.1 before 1.1(1j) and Nexus 9000 ACI Mode switches with software before 11.0(3h) and 11.1 before 11.1(1j) allow remote authenticated users to bypass intended RBAC restrictions via crafted REST requests, aka Bug ID CSCut12998.

Cisco Wireless LAN Controller (WLC) software, possibly 4.2 through 6.0, allows remote authenticated users to bypass intended access restrictions and modify the configuration, and possibly obtain administrative privileges, via unspecified vectors, a different vulnerability than CVE-2010-2842 and CVE-2010-3033.

SQL injection vulnerability in Cisco Wireless Control System (WCS) 6.0.x before 6.0.196.0 allows remote authenticated users to execute arbitrary SQL commands via vectors related to the ORDER BY clause of the Client List screens, aka Bug ID CSCtf37019.

Unspecified vulnerability in the tech support diagnostic shell in Cisco Application Extension Platform (AXP) 1.1 and 1.1.5 allows local users to obtain sensitive configuration information and gain administrator privileges via unspecified API calls.

Unspecified vulnerability in Cisco Mediator Framework 2.2 before 2.2.1.dev.1 and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 allows remote authenticated users to read or modify the device configuration, and gain privileges, via a (1) HTTP or (2) HTTPS request, aka Bug ID CSCtb83607.

The Cisco RVS4000 4-port Gigabit Security Router before 1.3.2.0, PVC2300 Business Internet Video Camera before 1.1.2.6, WVC200 Wireless-G PTZ Internet Video Camera before 1.1.1.15, WVC210 Wireless-G PTZ Internet Video Camera before 1.1.1.15, and WVC2300 Wireless-G Business Internet Video Camera before 1.1.2.6 do not properly restrict read access to passwords, which allows context-dependent attackers to obtain sensitive information, related to (1) access by remote authenticated users to a PVC2300 or WVC2300 via a crafted URL, (2) leveraging setup privileges on a WVC200 or WVC210, and (3) leveraging administrative privileges on an RVS4000, aka Bug ID CSCte64726.

A vulnerability in the Disaster Recovery framework of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), and Cisco Unity Connection could allow an authenticated, remote attacker to perform certain administrative actions they should not be able to. This vulnerability is due to insufficient access control checks on the affected device. An attacker with read-only privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to perform a set of administrative actions they should not be able to.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the CLI parser of Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected ASA FirePOWER module as the root user. This vulnerability is due to improper handling of undefined command parameters. An attacker could exploit this vulnerability by using a crafted command on the CLI or by submitting a crafted HTTPS request to the web-based management interface of the Cisco ASA that is hosting the ASA FirePOWER module. Note: To exploit this vulnerability, the attacker must have administrative access to the Cisco ASA. A user who has administrative access to a particular Cisco ASA is also expected to have administrative access to the ASA FirePOWER module that is hosted by that Cisco ASA.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to bypass security protections and upload malicious files to the affected system. This vulnerability is due to improper validation of files uploaded to the web management interface of Cisco FMC Software. An attacker could exploit this vulnerability by uploading a maliciously crafted file to a device running affected software. A successful exploit could allow the attacker to store malicious files on the device, which they could access later to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.