The network stack in Cisco TelePresence MCU Software before 4.3(2.30) allows remote attackers to cause a denial of service (memory consumption) via crafted TCP packets, aka Bug ID CSCtz35468.

Race condition in the Health and Performance Monitoring (HPM) for ASDM feature in Cisco ASA Software 8.3 before 8.3(2.42), 8.4 before 8.4(7.11), 8.5 before 8.5(1.19), 8.6 before 8.6(1.13), 8.7 before 8.7(1.11), 9.0 before 9.0(4.8), and 9.1 before 9.1(4.5) allows remote attackers to cause a denial of service (device reload) via TCP traffic that triggers many half-open connections at the same time, aka Bug ID CSCum00556.

Memory leak on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0, 5.1 before 5.1.163.0, and 5.0 and 5.2 before 5.2.178.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to cause a denial of service (memory consumption and device reload) via SSH management connections, aka Bug ID CSCsw40789.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.2), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.16); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCsy91157.

A vulnerability in the Session Initiation Protocol (SIP) inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload or trigger high CPU, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of SIP traffic. An attacker could exploit this vulnerability by sending SIP requests designed to specifically trigger this issue at a high rate across an affected device. Software updates that address this vulnerability are not yet available.

The SSLVPN feature in Cisco IOS 12.3 through 12.4 allows remote attackers to cause a denial of service (device reload or hang) via a crafted HTTPS packet.

A vulnerability in the TCP ingress handler for the data interfaces that are configured with management access to Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an increase in CPU and memory usage, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient ingress TCP rate limiting for TCP ports 22 (SSH) and 443 (HTTPS). An attacker could exploit this vulnerability by sending a crafted, steady stream of TCP traffic to port 22 or 443 on the data interfaces that are configured with management access to the affected device.

The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCua86589.

The CTI Manager service in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 4.x before 4.3(2)sr1a, 6.x before 6.1(3), 7.0x before 7.0(2), 7.1x before 7.1(2), and 8.x before 8.0(1) allows remote attackers to cause a denial of service (service failure) via a malformed message, aka Bug ID CSCsu31800.

A vulnerability in the Cisco Network Plug and Play agent, also referred to as the Cisco Open Plug-n-Play agent, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to insufficient input validation by the affected software. An attacker could exploit this vulnerability by sending invalid data to the Cisco Network Plug and Play agent on an affected device. A successful exploit could allow the attacker to cause a memory leak on the affected device, which could cause the device to reload.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4, when SIP voice services are enabled, allows remote attackers to cause a denial of service (device crash) via a valid SIP message.

Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.2) and Cisco ACE 4710 Application Control Engine Appliance before A1(8.0) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv3 packet.

Unspecified vulnerability in Cisco IOS 12.0 through 12.4, when configured with (1) IP Service Level Agreements (SLAs) Responder, (2) Session Initiation Protocol (SIP), (3) H.323 Annex E Call Signaling Transport, or (4) Media Gateway Control Protocol (MGCP) allows remote attackers to cause a denial of service (blocked input queue on the inbound interface) via a crafted UDP packet.

A vulnerability in the Secure/Multipurpose Internet Mail Extensions (S/MIME) Decryption and Verification or S/MIME Public Key Harvesting features of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause an affected device to corrupt system memory. A successful exploit could cause the filtering process to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to improper input validation of S/MIME-signed emails. An attacker could exploit this vulnerability by sending a malicious S/MIME-signed email through a targeted device. If Decryption and Verification or Public Key Harvesting is configured, the filtering process could crash due to memory corruption and restart, resulting in a DoS condition. The software could then resume processing the same S/MIME-signed email, causing the filtering process to crash and restart again. A successful exploit could allow the attacker to cause a permanent DoS condition. This vulnerability may require manual intervention to recover the ESA.

A vulnerability in certain IPv4 fragment-processing functions of Cisco Remote PHY Software could allow an unauthenticated, remote attacker to impact traffic passing through a device, potentially causing a denial of service (DoS) condition. The vulnerability is due to the affected software not validating and calculating certain numerical values in IPv4 packets that are sent to an affected device. An attacker could exploit this vulnerability by sending malformed IPv4 traffic to an affected device. A successful exploit could allow the attacker to disrupt the flow of certain IPv4 traffic passing through an affected device, which could result in a DoS condition.

The H.225 subsystem in Cisco TelePresence System MXP Series Software before F9.3.1 allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCtq78722.

The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.2.x before 5.2.157.0 allow remote attackers to cause a denial of service (device reload) via a web authentication (aka WebAuth) session that includes a malformed POST request to login.html.

Unspecified vulnerability in Cisco NX-OS before 4.0(1a)N2(1), when running on Nexus 5000 platforms, allows remote attackers to cause a denial of service (crash) via an unspecified "sequence of TCP packets" related to "TCP State manipulation," possibly related to separate attacks against CVE-2008-4609.

Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SSH packet.

Cisco IOS XE 2.x and 3.x before 3.9.0S, 3.10 before 3.10.0S, 3.11 before 3.11.0S, 3.12 before 3.12.0S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via crafted IPv6 packets, aka Bug ID CSCub68073.

Cisco Videoscape Distribution Suite Service Broker (aka VDS-SB), when a VDSM configuration on UCS is used, and Videoscape Distribution Suite for Internet Streaming (aka VDS-IS or CDS-IS) before 3.3.1 R7 and 4.x before 4.0.0 R4 allow remote attackers to cause a denial of service (device reload) via a crafted HTTP request, aka Bug IDs CSCus79834 and CSCuu63409.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper filtering of email messages that contain references to whitelisted URLs. An attacker could exploit this vulnerability by sending a malicious email message that contains a large number of whitelisted URLs. A successful exploit could allow the attacker to cause a sustained DoS condition that could force the affected device to stop scanning and forwarding email messages.

The Layer 4 Redirect (L4R) feature in Cisco IOS XE 2.x and 3.x before 3.10.4S, 3.11 before 3.11.3S, 3.12 before 3.12.2S, 3.13 before 3.13.1S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via malformed (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCuq59131.

Cisco IOS 12.2, 12.4, 15.0, 15.1, 15.2, 15.3, and 15.4 and IOS XE 2.5.x, 2.6.x, 3.1.xS through 3.12.xS before 3.12.3S, 3.2.xE through 3.7.xE before 3.7.1E, 3.3.xSG, 3.4.xSG, and 3.13.xS before 3.13.2S allow remote attackers to cause a denial of service (memory consumption and device reload) by sending malformed IKEv2 packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCuo75572.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (IKE process hang) via malformed NAT-T packets, aka Bug ID CSCsr74439.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to cause a denial of service (device reload) via unknown network traffic, as demonstrated by a "connection stress test," aka Bug ID CSCsq68451.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper memory protection mechanisms while processing certain OSPF packets. An attacker could exploit this vulnerability by sending a series of malformed OSPF packets in a short period of time to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the DHCP module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to incorrect processing of certain DHCP packets. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system.

Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 5.x before 5.1(3g), 6.x before 6.1(4), 7.0.x before 7.0(2a)su1, and 7.1.x before 7.1(2) allows remote attackers to cause a denial of service (service restart) via malformed SIP messages, aka Bug ID CSCsz95423.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the SIP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition.The vulnerability is due to a crash that occurs during a hash lookup for a SIP pinhole connection. An attacker could exploit this vulnerability by sending crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a crash and reload of the affected device.

The network drivers in Cisco TelePresence T, Cisco TelePresence TE, and Cisco TelePresence TC before 7.3.2 allow remote attackers to cause a denial of service (process restart or device reload) via a flood of crafted IP packets, aka Bug ID CSCuj68952.

Cisco IOS 15.1 through 15.3 and IOS XE 3.3 and 3.5 before 3.5.2E; 3.7 before 3.7.5S; and 3.8, 3.9, and 3.10 before 3.10.2S allow remote attackers to cause a denial of service (I/O memory consumption and device reload) via a malformed IPv6 packet, aka Bug ID CSCui59540.

The Cisco Firewall Services Module (FWSM) 2.x, 3.1 before 3.1(16), 3.2 before 3.2(13), and 4.0 before 4.0(6) for Cisco Catalyst 6500 switches and Cisco 7600 routers allows remote attackers to cause a denial of service (traffic-handling outage) via a series of malformed ICMP messages.

Unspecified vulnerability in the Session Border Controller (SBC) before 3.0(2) for Cisco 7600 series routers allows remote attackers to cause a denial of service (SBC card reload) via crafted packets to TCP port 2000.

A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610.

A vulnerability in the Zone-Based Firewall code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a device to reload. The vulnerability is due to the way fragmented packets are handled in the firewall code. An attacker could exploit this vulnerability by sending fragmented IP Version 4 or IP Version 6 packets through an affected device. An exploit could allow the attacker to cause the device to crash, resulting in a denial of service (DoS) condition. The following releases of Cisco IOS XE Software are vulnerable: Everest-16.4.1, Everest-16.4.2, Everest-16.5.1, Everest-16.5.1b, Everest-16.6.1, Everest-16.6.1a. Cisco Bug IDs: CSCvf60296.

A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446.

A vulnerability in the IPv6 subsystem of Cisco IOS XR Software Release 5.3.4 for the Cisco Aggregation Services Router (ASR) 9000 Series could allow an unauthenticated, remote attacker to trigger a reload of one or more Trident-based line cards, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect handling of IPv6 packets with a fragment header extension. An attacker could exploit this vulnerability by sending IPv6 packets designed to trigger the issue either to or through the Trident-based line card. A successful exploit could allow the attacker to trigger a reload of Trident-based line cards, resulting in a DoS during the period of time the line card takes to restart. This vulnerability affects Cisco Aggregation Services Router (ASR) 9000 Series when the following conditions are met: The router is running Cisco IOS XR Software Release 5.3.4, and the router has installed Trident-based line cards that have IPv6 configured. A software maintenance upgrade (SMU) has been made available that addresses this vulnerability. The fix has also been incorporated into service pack 7 for Cisco IOS XR Software Release 5.3.4. Cisco Bug IDs: CSCvg46800.

A vulnerability in the reassembly logic for fragmented IPv4 packets of Cisco StarOS running on virtual platforms could allow an unauthenticated, remote attacker to trigger a reload of the npusim process, resulting in a denial of service (DoS) condition. There are four instances of the npusim process running per Service Function (SF) instance, each handling a subset of all traffic flowing across the device. It is possible to trigger a reload of all four instances of the npusim process around the same time. The vulnerability is due to improper handling of fragmented IPv4 packets containing options. An attacker could exploit this vulnerability by sending a malicious IPv4 packet across an affected device. An exploit could allow the attacker to trigger a restart of the npusim process, which will result in all traffic queued toward this instance of the npusim process to be dropped while the process is restarting. The npusim process typically restarts within less than a second. This vulnerability affects: Cisco Virtualized Packet Core-Single Instance (VPC-SI), Cisco Virtualized Packet Core-Distributed Instance (VPC-DI), Cisco Ultra Packet Core (UPC). Cisco Bug IDs: CSCvh29613.

A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718.

A vulnerability in the Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) certificate validation during EAP authentication for the Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the ISE application server to restart unexpectedly, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incomplete input validation of the client EAP-TLS certificate. An attacker could exploit this vulnerability by initiating EAP authentication over TLS to the ISE with a crafted EAP-TLS certificate. A successful exploit could allow the attacker to restart the ISE application server, resulting in a DoS condition on the affected system. The ISE application could continue to restart while the client attempts to establish the EAP authentication connection. If an attacker attempted to import the same EAP-TLS certificate to the ISE trust store, it could trigger a DoS condition on the affected system. This exploit vector would require the attacker to have valid administrator credentials. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance. Cisco Bug IDs: CSCve31857.

A vulnerability in the IP Version 4 (IPv4) processing code of Cisco IOS XE Software running on Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IPv4 packets. An attacker could exploit this vulnerability by sending specific IPv4 packets to an IPv4 address on an affected device. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. If the switch does not reboot when under attack, it would require manual intervention to reload the device. This vulnerability affects Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches that are running Cisco IOS XE Software Release 16.1.1 or later, until the first fixed release, and are configured with an IPv4 address. Cisco Bug IDs: CSCvd80714.