A packet processing mechanism in Palo Alto Networks PAN-OS software enables a remote attacker to reboot hardware-based firewalls. Repeated attacks eventually cause the firewall to enter maintenance mode, which requires manual intervention to bring the firewall back online. This affects the following hardware firewall models: - PA-5400 Series firewalls - PA-7000 Series firewalls

An improper input validation vulnerability in the configuration daemon of Palo Alto Networks PAN-OS Panorama allows for a remote unauthenticated user to send a specifically crafted registration request to the device that causes the configuration service to crash. Repeated attempts to send this request result in denial of service to all PAN-OS Panorama services by restarting the device and putting it into maintenance mode. This issue affects: All versions of PAN-OS 7.1, PAN-OS 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7; PAN-OS 9.1 versions earlier than 9.1.0.

Palo Alto Networks PAN-OS before 6.1.19, 7.0.x before 7.0.19, 7.1.x before 7.1.13, and 8.0.x before 8.0.6 allows remote attackers to cause a denial of service via vectors related to the management interface.

An improper handling of exceptional conditions vulnerability exists in Palo Alto Networks GlobalProtect portal and gateway interfaces that enables an unauthenticated network-based attacker to send specifically crafted traffic to a GlobalProtect interface that causes the service to stop responding. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.21; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h4; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h3; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8-h4; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers are not impacted by this issue.

An improper handling of exceptional conditions vulnerability exists in the Palo Alto Networks PAN-OS dataplane that enables an unauthenticated network-based attacker to send specifically crafted traffic through the firewall that causes the service to crash. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14; PAN-OS 9.1 versions earlier than PAN-OS 9.1.9; PAN-OS 10.0 versions earlier than PAN-OS 10.0.5. This issue does not affect Prisma Access.

A Denial of Service vulnerability in the DNS Security feature of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to send a malicious packet through the data plane of the firewall that reboots the firewall. Repeated attempts to trigger this condition will cause the firewall to enter maintenance mode.

A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.

A vulnerability in Palo Alto Networks PAN-OS software enables a remote attacker to reboot PAN-OS firewalls when receiving Windows New Technology LAN Manager (NTLM) packets from Windows servers. Repeated attacks eventually cause the firewall to enter maintenance mode, which requires manual intervention to bring the firewall back online.

A denial of service flaw was found in OpenSSL 0.9.8, 1.0.1, 1.0.2 through 1.0.2h, and 1.1.0 in the way the TLS/SSL protocol defined processing of ALERT packets during a connection handshake. A remote attacker could use this flaw to make a TLS/SSL server consume an excessive amount of CPU and fail to accept connections from other clients.

A null pointer dereference vulnerability in the GlobalProtect gateway in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to stop the GlobalProtect service on the firewall by sending a specially crafted packet that causes a denial of service (DoS) condition. Repeated attempts to trigger this condition result in the firewall entering maintenance mode.

A null pointer dereference vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to stop a core system service on the firewall by sending a crafted packet through the data plane that causes a denial of service (DoS) condition. Repeated attempts to trigger this condition result in the firewall entering maintenance mode.

The GlobalProtect Portal in Palo Alto Networks PAN-OS before 5.0.18, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5H2 allows remote attackers to cause a denial of service (service crash) via a crafted request.

An insecure configuration of the appweb daemon of Palo Alto Networks PAN-OS 8.1 allows a remote unauthenticated user to send a specifically crafted request to the device that causes the appweb service to crash. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts all versions of PAN-OS 8.0, and PAN-OS 8.1 versions earlier than 8.1.16.

An uncontrolled resource consumption vulnerability in Palo Alto Networks PAN-OS allows for a remote unauthenticated user to upload temporary files through the management web interface that are not properly deleted after the request is finished. It is possible for an attacker to disrupt the availability of the management web interface by repeatedly uploading files until available disk space is exhausted. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

The DNS Proxy in Palo Alto Networks PAN-OS before 6.1.18, 7.x before 7.0.16, 7.1.x before 7.1.11, and 8.x before 8.0.3 allows remote attackers to execute arbitrary code via a crafted domain name.

The Management Web Interface in Palo Alto Networks PAN-OS before 7.1.9 allows remote authenticated users to gain privileges via unspecified request parameters.

The Management Web Interface in Palo Alto Networks PAN-OS before 7.0.14 and 7.1.x before 7.1.9 allows remote attackers to write to export files via unspecified parameters.

Palo Alto Networks PAN-OS before 6.1.19, 7.0.x before 7.0.19, 7.1.x before 7.1.14, and 8.0.x before 8.0.6 allows remote attackers to execute arbitrary code via vectors involving the management interface.

Palo Alto Networks PAN-OS before 3.1.11 and 4.0.x before 4.0.9 allows remote authenticated users to cause a denial of service (management-server crash) by using the command-line interface for a crafted command, aka Ref ID 35254.

A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall. Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability.

A remote code execution vulnerability in the PAN-OS SSH device management interface that can lead to unauthenticated remote users with network access to the SSH management interface gaining root access to PAN-OS. This issue affects PAN-OS 7.1 versions prior to 7.1.24-h1, 7.1.25; 8.0 versions prior to 8.0.19-h1, 8.0.20; 8.1 versions prior to 8.1.9-h4, 8.1.10; 9.0 versions prior to 9.0.3-h3, 9.0.4.

The PAN-OS management web interface page in PAN-OS 6.1.20 and earlier, PAN-OS 7.1.16 and earlier, PAN-OS 8.0.9 and earlier may allow an attacker to delete files in the system via specific request parameters.

The management web interface in Palo Alto Networks PAN-OS before 5.0.18, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5 allows remote attackers to execute arbitrary OS commands via an unspecified API call.

The device management command line interface (CLI) in Palo Alto Networks PAN-OS before 5.0.18, 5.1.x before 5.1.11, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5H2 allows remote authenticated administrators to execute arbitrary OS commands via an SSH command parameter.

Palo Alto Networks PAN-OS before 5.0.19, 5.1.x before 5.1.12, 6.0.x before 6.0.14, 6.1.x before 6.1.12, and 7.0.x before 7.0.8 might allow local users to gain privileges by leveraging improper sanitization of the root_reboot local invocation.

The PAN-OS Management Web Interface in Palo Alto Networks PAN-OS 8.1.2 and earlier may allow an authenticated user to shut down all management sessions, resulting in all logged in users to be redirected to the login page. PAN-OS 6.1, PAN-OS 7.1 and PAN-OS 8.0 are NOT affected.

When SSL/TLS Forward Proxy Decryption mode has been configured to decrypt the web transactions, the PAN-OS URL filtering feature inspects the HTTP Host and URL path headers for policy enforcement on the decrypted HTTPS web transactions but does not consider Server Name Indication (SNI) field within the TLS Client Hello handshake. This allows a compromised host in a protected network to evade any security policy that uses URL filtering on a firewall configured with SSL Decryption in the Forward Proxy mode. A malicious actor can then use this technique to evade detection of communication on the TLS handshake phase between a compromised host and a remote malicious server. This technique does not increase the risk of a host being compromised in the network. It does not impact the confidentiality or availability of a firewall. This is considered to have a low impact on the integrity of the firewall because the firewall fails to enforce a policy on certain traffic that should have been blocked. This issue does not impact the URL filtering policy enforcement on clear text or encrypted web transactions. This technique can be used only after a malicious actor has compromised a host in the protected network and the TLS/SSL Decryption feature is enabled for the traffic that the attacker controls. Palo Alto Networks is not aware of any malware that uses this technique to exfiltrate data. This issue is applicable to all current versions of PAN-OS. This issue does not impact Panorama or WF-500 appliances.

An OS command injection and memory corruption vulnerability in the PAN-OS management web interface that allows authenticated administrators to disrupt system processes and potentially execute arbitrary code and OS commands with root privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

A denial-of-service (DoS) vulnerability in Palo Alto Networks GlobalProtect software running on Mac OS allows authenticated local users to cause the Mac OS kernel to hang or crash. This issue affects GlobalProtect 5.0.5 and earlier versions of GlobalProtect 5.0 on Mac OS.

Secdo tries to execute a script at a hardcoded path if present, which allows a local authenticated user with 'create folders or append data' access to the root of the OS disk (C:\) to gain system privileges if the path does not already exist or is writable. This issue affects all versions of Secdo for Windows.

Improper input validation vulnerability in Secdo allows an authenticated local user with 'create folders or append data' access to the root of the OS disk (C:\) to cause a system crash on every login. This issue affects all versions Secdo for Windows.

An improper input validation vulnerability in Palo Alto Networks PAN-OS software enables an attacker with the ability to tamper with the physical file system to elevate privileges.

A denial-of-service (DoS) vulnerability in Palo Alto Networks GlobalProtect app on Windows systems allows a limited Windows user to send specifically-crafted input to the GlobalProtect app that results in a Windows blue screen of death (BSOD) error. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.8; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.4.

Certain invalid URL entries contained in an External Dynamic List (EDL) cause the Device Server daemon (devsrvr) to stop responding. This condition causes subsequent commits on the firewall to fail and prevents administrators from performing commits and configuration changes even though the firewall remains otherwise functional. If the firewall then restarts, it results in a denial-of-service (DoS) condition and the firewall stops processing traffic. This issue impacts: PAN-OS 9.0 versions earlier than PAN-OS 9.0.14; PAN-OS 9.1 versions earlier than PAN-OS 9.1.9; PAN-OS 10.0 versions earlier than PAN-OS 10.0.5. PAN-OS 8.1 and PAN-OS 10.1 versions are not impacted.

Microsoft .NET Framework 4.6, 4.6.1, 4.6.2, and 4.7 allow an attacker to send specially crafted requests to a .NET web application, resulting in denial of service, aka .NET Denial of Service Vulnerability.

The PPTP-ALG component in CRS Carrier Grade Services Engine (CGSE) and ASR 9000 Integrated Service Module (ISM) in Cisco IOS XR allows remote attackers to cause a denial of service (module reset) via crafted packet streams, aka Bug ID CSCue91963.

The SIP channel driver (channels/chan_sip.c) in Asterisk Open Source 1.8.x before 1.8.23.1, 10.x before 10.12.3, and 11.x before 11.5.1; Certified Asterisk 1.8.15 before 1.8.15-cert3 and 11.2 before 11.2-cert2; and Asterisk Digiumphones 10.x-digiumphones before 10.12.3-digiumphones allows remote attackers to cause a denial of service (NULL pointer dereference, segmentation fault, and daemon crash) via an invalid SDP that defines a media description before the connection description in a SIP request.

An incorrect "pair?" check in the Scheme "length" procedure results in an unsafe pointer dereference in all CHICKEN Scheme versions prior to 4.13, which allows an attacker to cause a denial of service by passing an improper list to an application that calls "length" on it.

The qemu-nbd server in QEMU (aka Quick Emulator), when built with the Network Block Device (NBD) Server support, allows remote attackers to cause a denial of service (segmentation fault and server crash) by leveraging failure to ensure that all initialization occurs before talking to a client in the nbd_negotiate function.

In Wireshark 2.2.0 to 2.2.6, the IPv6 dissector could crash. This was addressed in epan/dissectors/packet-ipv6.c by validating an IPv6 address.

The Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.28, is vulnerable to an invalid read of size 1 because the existing reloc offset range tests didn't catch small negative offsets less than the size of the reloc field. This vulnerability causes programs that conduct an analysis of binary programs using the libbfd library, such as objdump, to crash.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the RGMP dissector could crash. This was addressed in epan/dissectors/packet-rgmp.c by validating an IPv4 address.

Vulnerabilities in RPC servers in (1) Microsoft Exchange Server 2000 and earlier, (2) Microsoft SQL Server 2000 and earlier, (3) Windows NT 4.0, and (4) Windows 2000 allow remote attackers to cause a denial of service via malformed inputs.

If a long user name is used in a username/password combination in a site URL (such as " http://UserName:Password@example.com"), the resulting modal prompt will hang in a non-responsive state or crash, causing a denial of service. This vulnerability affects Firefox < 55.

AC6005 V200R006C10SPC200,AC6605 V200R006C10SPC200,AR1200 with software V200R005C10CP0582T, V200R005C10HP0581T, V200R005C20SPC026T,AR200 with software V200R005C20SPC026T,AR3200 V200R005C20SPC026T,CloudEngine 12800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 5800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 6800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 7800 with software V100R003C00, V100R005C00, V100R005C10, V100R006C00, V200R001C00,CloudEngine 8800 with software V100R006C00, V200R001C00,E600 V200R008C00,S12700 with software V200R005C00, V200R006C00, V200R007C00, V200R008C00,S1700 with software V100R006C00, V100R007C00, V200R006C00,S2300 with software V100R005C00, V100R006C00, V100R006C03, V100R006C05, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00,S2700 with software V100R005C00, V100R006C00, V100R006C03, V100R006C05, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R005C01, V200R005C02, V200R005C03, V200R006C00, V200R007C00, V200R008C00,S5300 with software V100R005C00, V100R006C00, V100R006C01, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S5700 with software V100R005C00, V100R006C00, V100R006C01, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S6300 with software V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R008C00,S6700 with software V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R003C02, V200R003C10, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S7700 with software V100R003C00, V100R006C00, V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00,S9300 with software V100R001C00, V100R002C00, V100R003C00, V100R006C00, V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00, V200R008C10,S9700 with software V200R001C00, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R007C00, V200R008C00,Secospace USG6600 V500R001C00SPC050 have a MaxAge LSA vulnerability due to improper OSPF implementation. When the device receives special LSA packets, the LS (Link Status) age would be set to MaxAge, 3600 seconds. An attacker can exploit this vulnerability to poison the route table and launch a DoS attack.

EMC AppSync host plug-in versions 3.5 and below (Windows platform only) includes a denial of service (DoS) vulnerability that could potentially be exploited by malicious users to compromise the affected system.

The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c.

XStream through 1.4.9, when a certain denyTypes workaround is not used, mishandles attempts to create an instance of the primitive type 'void' during unmarshalling, leading to a remote application crash, as demonstrated by an xstream.fromXML("<void/>") call.

Buffer overflow in the web-application interface on Cisco 9900 IP phones allows remote attackers to cause a denial of service (webapp interface outage) via long values in unspecified fields, aka Bug ID CSCuh10343.

Adobe LiveCycle Data Services 3.1 and earlier, LiveCycle 9.0.0.2 and earlier, and BlazeDS 4.0.1 and earlier do not properly handle object graphs, which allows attackers to cause a denial of service via unspecified vectors, related to a "complex object graph vulnerability."