The Rockwell Automation Thinmanager Thinserver is impacted by an improper input validation vulnerability, an integer overflow condition exists in the affected products. When the ThinManager processes incoming messages, a read access violation occurs and terminates the process. A malicious user could exploit this vulnerability by sending a crafted synchronization protocol message and causing a denial of service condition in the software.

The web interface in Samsung DVR SHR2040 allows remote attackers to cause a denial of service (crash) via a malformed HTTP request, related to the filter for configuration properties and "/x" characters.

Integer overflow in the netsnmp_create_subtree_cache function in agent/snmp_agent.c in net-snmp 5.4 before 5.4.2.1, 5.3 before 5.3.2.3, and 5.2 before 5.2.5.1 allows remote attackers to cause a denial of service (crash) via a crafted SNMP GETBULK request, which triggers a heap-based buffer overflow, related to the number of responses or repeats.

Unspecified vulnerability in ISC BIND 9.3.5-P2-W1, 9.4.2-P2-W1, and 9.5.0-P2-W1 on Windows allows remote attackers to cause a denial of service (UDP client handler termination) via unknown vectors.

The XML parser in Xerces-C++ before 3.0.0 allows context-dependent attackers to cause a denial of service (stack consumption and crash) via an XML schema definition with a large maxOccurs value, which triggers excessive memory consumption during validation of an XML file.

The Stream Control Transmission Protocol (sctp) implementation in the Linux kernel before 2.6.27 does not properly handle a protocol violation in which a parameter has an invalid length, which allows attackers to cause a denial of service (panic) via unspecified vectors, related to sctp_sf_violation_paramlen, sctp_sf_abort_violation, sctp_make_abort_violation, and incorrect data types in function calls.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.8 and 3.2.5, when a specially crafted SIP message is processed by the function `rewrite_ruri`, a crash occurs due to a segmentation fault. This issue causes the server to crash. It affects configurations containing functions that make use of the affected code, such as the function `setport`. This issue has been fixed in version 3.1.8 and 3.2.5.

An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), and M(6.0) software. The InputMethod application can cause a system crash via a malformed serializable object in an Intent. The Samsung ID is SVE-2016-7123 (February 2017).

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.9 and 3.2.6, if `ds_is_in_list()` is used with an invalid IP address string (`NULL` is illegal input), OpenSIPS will attempt to print a string from a random address (stack garbage), which could lead to a crash. All users of `ds_is_in_list()` without the `$si` variable as 1st parameter could be affected by this vulnerability to a larger, lesser or no extent at all, depending if the data passed to the function is a valid IPv4 or IPv6 address string or not. Fixes will are available starting with the 3.1.9 and 3.2.6 minor releases. There are no known workarounds.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the OAuth filter assumes that a `state` query param is present on any response that looks like an OAuth redirect response. Sending it a request with the URI path equivalent to the redirect path, without the `state` parameter, will lead to abnormal termination of Envoy process. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. The issue can also be mitigated by locking down OAuth traffic, disabling the filter, or by filtering traffic before it reaches the OAuth filter (e.g. via a lua script).

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, 9.2 CD, and 9.3 CD and IBM MQ Appliance 9.2 LTS, 9.3 LTS, 9.2 CD, and 9.2 LTS, under certain configurations, is vulnerable to a denial of service attack caused by an error processing messages. IBM X-Force ID: 250397.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Versions prior to 3.1.7 and 3.2.4 have a potential issue in `msg_translator.c:2628` which might lead to a server crash. This issue was found while fuzzing the function `build_res_buf_from_sip_req` but could not be reproduced against a running instance of OpenSIPS. This issue could not be exploited against a running instance of OpenSIPS since no public function was found to make use of this vulnerable code. Even in the case of exploitation through unknown vectors, it is highly unlikely that this issue would lead to anything other than Denial of Service. This issue has been fixed in versions 3.1.7 and 3.2.4.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to a denial of service as the server may crash when using a specially crafted subquery. IBM X-Force ID: 249196.

The web interface in Dreambox DM500C allows remote attackers to cause a denial of service (application hang) via a long URI.

IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5 is vulnerable to a denial of service when attempting to use ACR client affinity for unfenced DRDA federation wrappers. IBM X-Force ID: 249187.

crossplane-runtime is a set of go libraries used to build Kubernetes controllers in Crossplane and its related stacks. An out of memory panic vulnerability has been discovered in affected versions. Applications that use the `Paved` type's `SetValue` method with user provided input without proper validation might use excessive amounts of memory and cause an out of memory panic. In the fieldpath package, the Paved.SetValue method sets a value on the Paved object according to the provided path, without any validation. This allows setting values in slices at any provided index, which grows the target array up to the requested index, the index is currently capped at max uint32 (4294967295) given how indexes are parsed, but that is still an unnecessarily large value. If callers are not validating paths' indexes on their own, which most probably are not going to do, given that the input is parsed directly in the SetValue method, this could allow users to consume arbitrary amounts of memory. Applications that do not use the `Paved` type's `SetValue` method are not affected. This issue has been addressed in versions 0.16.1 and 0.19.2. Users are advised to upgrade. Users unable to upgrade can parse and validate the path before passing it to the `SetValue` method of the `Paved` type, constraining the index size as deemed appropriate.

Cisco ONS 15310-CL, 15310-MA, 15327, 15454, 15454 SDH, and 15600 with software 7.0.2 through 7.0.6, 7.2.2, 8.0.x, 8.5.1, and 8.5.2 allows remote attackers to cause a denial of service (control-card reset) via a crafted TCP session.

Cisco IOS 12.2 and 12.4, when NAT Skinny Call Control Protocol (SCCP) Fragmentation Support is enabled, allows remote attackers to cause a denial of service (device reload) via segmented SCCP messages, aka CSCsg22426, a different vulnerability than CVE-2008-3811.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.7 and 3.2.4, OpenSIPS crashes when a malformed SDP body is received and is processed by the `delete_sdp_line` function in the sipmsgops module. This issue can be reproduced by calling the function with an SDP body that does not terminate by a line feed (i.e. `\n`). The vulnerability was found while performing black-box fuzzing against an OpenSIPS server running a configuration that made use of the functions `codec_delete_except_re` and `codec_delete_re`. The same issue was also discovered while performing coverage guided fuzzing on the function `codec_delete_except_re`. The crash happens because the function `delete_sdp_line` expects that an SDP line is terminated by a line feed (`\n`). By abusing this vulnerability, an attacker is able to crash the server. It affects configurations containing functions that rely on the affected code, such as the function `codec_delete_except_re`. Due to the sanity check that is performed in the `del_lump` function, exploitation of this issue will generate an `abort` in the lumps processing function, resulting in a Denial of Service. This issue is patched in versions 3.1.7 and 3.2.4.

ASQ in Stormshield Network Security (SNS) 4.3.15 before 4.3.16 and 4.6.x before 4.6.3 allows a crash when analysing a crafted SIP packet.

Rockwell Automation MicroLogix 1100, all versions, allows a remote, unauthenticated attacker sending specially crafted commands to cause the PLC to fault when the controller is switched to RUN mode, which results in a denial-of-service condition. If successfully exploited, this vulnerability will cause the controller to fault whenever the controller is switched to RUN mode.

Unspecified vulnerability in IBM Lotus Quickr 8.1 before Fix pack 1 (8.1.0.1) might allow attackers to cause a denial of service (system crash) via a "nonstandard URL argument" to the OpenDocument command. NOTE: due to lack of details from the vendor, it is not clear whether this is a vulnerability.

Data can be copied without validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier, which may allow a remote attacker to cause denial-of-service conditions.

A Denial-of-Service (DoS) vulnerability in the httpd component of TP-Link's TD-W8961N v4.0 due to improper input sanitization, allows crafted requests to trigger a processing error that causes the httpd service to crash. Successful exploitation may allow the attacker to cause service interruption, resulting in a DoS condition.

Multiple unspecified vulnerabilities in ReSIProcate before 1.3.4 allow remote attackers to cause a denial of service (stack consumption) via unknown network traffic with a large "bytes-in-memory/bytes-on-wire ratio."

Pexip Infinity before 26 allows remote denial of service because of missing H.264 input validation (issue 1 of 2).

Pexip Infinity before 26 allows remote denial of service because of missing H.264 input validation (issue 2 of 2).

(1) unsquash-1.c, (2) unsquash-2.c, (3) unsquash-3.c, and (4) unsquash-4.c in Squashfs and sasquatch allow remote attackers to cause a denial of service (application crash) via a crafted input.

The pppol2tp_recvmsg function in drivers/net/pppol2tp.c in the Linux kernel 2.6 before 2.6.26-rc6 allows remote attackers to cause a denial of service (kernel heap memory corruption and system crash) and possibly have unspecified other impact via a crafted PPPOL2TP packet that results in a large value for a certain length variable.

client/NmdcHub.cpp in Linux DC++ (linuxdcpp) before 0.707 allows remote attackers to cause a denial of service (crash) via an empty private message, which triggers an out-of-bounds read.

Pexip Infinity 25.x before 25.4 has Improper Input Validation, and thus an unauthenticated remote attacker can cause a denial of service via the administrative web interface.

An Improper Input Validation vulnerability in Packet Forwarding Engine manager (FXPC) process of Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) by sending specific DHCPv6 packets to the device and crashing the FXPC service. Continued receipt and processing of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms in ACX Series: ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096 devices. Other ACX platforms are not affected from this issue. This issue affects Juniper Networks Junos OS on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096: 18.4 version 18.4R3-S7 and later versions prior to 18.4R3-S8. This issue does not affect: Juniper Networks Junos OS 18.4 versions prior to 18.4R3-S7 on ACX500, ACX1000, ACX1100, ACX2100, ACX2200, ACX4000, ACX5048, ACX5096.

An issue was discovered in tcp_rcv() in nptcp.c in HCC embedded InterNiche 4.0.1. The TCP header processing code doesn't sanitize the value of the IP total length field (header length + data length). With a crafted IP packet, an integer overflow occurs whenever the value of the IP data length is calculated by subtracting the length of the header from the total length of the IP packet.

The Xerox Phaser 8400 allows remote attackers to cause a denial of service (reboot) via an empty UDP packet to port 1900.

Unspecified vulnerability in Yamaha routers allows remote attackers to cause a denial of service (dropped session) via crafted BGP UPDATE messages, leading to route flapping, possibly a related issue to CVE-2007-6372.

The SIP Proxy (SIPD) service in Cisco Unified Presence before 6.0(3) allows remote attackers to cause a denial of service (core dump and service interruption) via a TCP port scan, aka Bug ID CSCsj64533.

Cisco Adaptive Security Appliance (ASA) and Cisco PIX security appliance 7.1.x before 7.1(2)70, 7.2.x before 7.2(4), and 8.0.x before 8.0(3)10 allows remote attackers to cause a denial of service via a crafted TCP ACK packet to the device interface.

The Computer Telephony Integration (CTI) Manager service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3c) and 6.x before 6.1(2) allows remote attackers to cause a denial of service (TSP crash) via malformed network traffic to TCP port 2748.

Unspecified vulnerability in Avici routers allows remote attackers to cause a denial of service (dropped session) via crafted BGP UPDATE messages, leading to route flapping, possibly a related issue to CVE-2007-6372.

DVP-12SE11T - Denial of Service Vulnerability

The HTTP service on the Cisco Linksys WRH54G with firmware 1.01.03 allows remote attackers to cause a denial of service (management interface outage) or possibly execute arbitrary code via a URI that begins with a "/./" sequence, contains many instances of a "front_page" sequence, and ends with a ".asp" sequence.

Cisco Adaptive Security Appliance (ASA) and Cisco PIX security appliance 8.0.x before 8.0(3)9 and 8.1.x before 8.1(1)1 allows remote attackers to cause a denial of service (device reload) via a crafted Transport Layer Security (TLS) packet to the device interface.

Possible buffer overflow due to Improper validation of received CF-ACK and CF-Poll data frames in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music

Unspecified vulnerability in Cisco Unified Communications Manager 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (CCM service restart) via an unspecified SIP INVITE message, aka Bug ID CSCsk46944.

In FreeBSD 13.0-STABLE before n245765-bec0d2c9c841, 12.2-STABLE before r369859, 11.4-STABLE before r369866, 13.0-RELEASE before p1, 12.2-RELEASE before p7, and 11.4-RELEASE before p10, missing message validation in libradius(3) could allow malicious clients or servers to trigger denial of service in vulnerable servers or clients respectively.

Cisco Unified Communications Manager 4.1 before 4.1(3)SR7, 4.2 before 4.2(3)SR4, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) does not properly validate SIP URLs, which allows remote attackers to cause a denial of service (service interruption) via a SIP INVITE message, aka Bug ID CSCsl22355.

The SNMP Trap Agent service in Cisco Unified Communications Manager (CUCM) 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (core dump and service restart) via a series of malformed UDP packets, as demonstrated by the IP Stack Integrity Checker (ISIC), aka Bug ID CSCsj24113.

Unspecified vulnerability in Century routers allows remote attackers to cause a denial of service (dropped session) via crafted BGP UPDATE messages, leading to route flapping, possibly a related issue to CVE-2007-6372.

IBM HTTP Server 8.5 used by IBM WebSphere Application Server could allow a remote user to cause a denial of service using a specially crafted URL. IBM X-Force ID: 248296.