Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices have a timeout policy to wait for 5 minutes in case 30 incorrect password attempts are detected using the Web and HTTP API interface provided by the device. However, if the same brute force attempt is performed using the ONVIF specification (which is supported by the same binary) then there is no account lockout or timeout executed. This can allow an attacker to circumvent the account protection mechanism and brute force the credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that performs the credential check in the binary for the ONVIF specification. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function at address 00671618 in IDA pro is parses the WSSE security token header. The sub_ 603D8 then performs the authentication check and if it is incorrect passes to the function sub_59F4C which prints the value "Sender not authorized."

The Amcrest IPM-721S Amcrest_IPC-AWXX_Eng_N_V2.420.AC00.17.R.20170322 allows HTTP requests that permit enabling various functionalities of the camera by using HTTP APIs, instead of the web management interface that is provided by the application. This HTTP API receives the credentials as base64 encoded in the Authorization HTTP header. However, a missing length check in the code allows an attacker to send a string of 1024 characters in the password field, and allows an attacker to exploit a memory corruption issue. This can allow an attacker to circumvent the account protection mechanism and brute force the credentials. If the firmware version Amcrest_IPC-AWXX_Eng_N_V2.420.AC00.17.R.20170322 is dissected using the binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that has many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that performs the credential check in the binary for the HTTP API specification. If we open this binary in IDA Pro we will notice that this follows an ARM little-endian format. The function at address 00415364 in IDA Pro starts the HTTP authentication process. This function calls another function at sub_ 0042CCA0 at address 0041549C. This function performs a strchr operation after base64 decoding the credentials, and stores the result on the stack, which results in a stack-based buffer overflow.

Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices have default credentials that are hardcoded in the firmware and can be extracted by anyone who reverses the firmware to identify them. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro, one will notice that this follows a ARM little endian format. The function sub_3DB2FC in IDA pro is identified to be setting up the values at address 0x003DB5A6. The sub_5C057C then sets this value and adds it to the Configuration files in /mnt/mtd/Config/Account1 file.

An issue was discovered in Amcrest Web Server 2.520.AC00.18.R 2017-06-29 WEB 3.2.1.453504. The login page responds with JavaScript when one tries to authenticate. An attacker who changes the result parameter (to true) in this JavaScript code can bypass authentication and achieve limited privileges (ability to see every option but not modify them).

The Amcrest IP2M-841B V2.520.AC00.18.R, Dahua IPC-XXBXX V2.622.0000000.9.R, Dahua IPC HX5X3X and HX4X3X V2.800.0000008.0.R, Dahua DH-IPC HX883X and DH-IPC-HX863X V2.622.0000000.7.R, Dahua DH-SD4XXXXX V2.623.0000000.7.R, Dahua DH-SD5XXXXX V2.623.0000000.1.R, Dahua DH-SD6XXXXX V2.640.0000000.2.R and V2.623.0000000.1.R, Dahua NVR5XX-4KS2 V3.216.0000006.0.R, Dahua NVR4XXX-4KS2 V3.216.0000006.0.R, and NVR2XXX-4KS2 do not require authentication to access the HTTP endpoint /videotalk. An unauthenticated, remote person can connect to this endpoint and potentionally listen to the audio of the capturing device.

Nuuo NT-4040 Titan, firmware NT-4040_01.07.0000.0015_1120, uses non-random default credentials of: admin:admin and localdisplay:111111. A remote network attacker can gain privileged access to a vulnerable device.

In MobaTek MobaXterm Personal Edition v11.1 Build 3860, the SSH private key and its password can be retrieved from process memory for the lifetime of the process, even after the user disconnects from the remote SSH server. This affects Passwordless Authentication that has a Password Protected SSH Private Key.

curl 7.x before 7.10.7 sends CONNECT proxy credentials to the remote server.

The SeaMicro provisioning of Ubuntu MAAS logs credentials, including username and password, for the management interface. This issue affects Ubuntu MAAS versions prior to 1.9.2.

A Credentials Management CWE-255 vulnerability exists in the APC UPS Network Management Card 2 AOS v6.5.6, which could cause Remote Monitoring Credentials to be viewed in plaintext when Remote Monitoring is enabled, and then disabled.

An unauthenticated remote attacker may be able to execute commands to view wireless account credentials that are stored in cleartext on Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16, which may allow an attacker to gain access the host network. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

The Remote Desktop Launcher in Thycotic Secret Server before 8.6.000010 does not properly cleanup a temporary file that contains an encrypted password once a session has ended.

Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all database information.

A vulnerability in the install function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the administrative web interface using a default hard-coded username and password that are used during install. The vulnerability is due to a hard-coded password that, in some cases, is not replaced with a unique password. A successful exploit could allow the attacker to access the administrative web interface with administrator-level privileges.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

An issue was discovered on Vera Veralite 1.7.481 devices. The device has an additional OpenWRT interface in addition to the standard web interface which allows the highest privileges a user can obtain on the device. This web interface uses root as the username and the password in the /etc/cmh/cmh.conf file which can be extracted by an attacker using a directory traversal attack, and then log in to the device with the highest privileges.

An issue was discovered in Riello NetMan 204 14-2 and 15-2. The issue is with the login script and wrongpass Python script used for authentication. When calling wrongpass, the variables $VAL0 and $VAL1 should be enclosed in quotes to prevent the potential for Bash command injection. Further to this, VAL0 and VAL1 should be sanitised to ensure they do not contain malicious characters. Passing it the username of '-' will cause it to time out and log the user in because of poor error handling. This will log the attacker in as an administrator where the telnet / ssh services can be enabled, and the credentials for local users can be reset. Also, login.cgi accepts the username as a GET parameter, so login can be achieved by browsing to the /cgi-bin/login.cgi?username=-%20a URI.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

In Apache Airflow 1.8.2 and earlier, an experimental Airflow feature displayed authenticated cookies, as well as passwords to databases used by Airflow. An attacker who has limited access to airflow, whether it be via XSS or by leaving a machine unlocked can exfiltrate all credentials from the system.

Wi-Fi STATION L-02F Software version V10g and earlier allows remote attackers to access the device with administrative privileges and perform unintended operations through a backdoor account.

A common setup to deploy to gh-pages on every commit via a CI system is to expose a github token to ENV and to use it directly in the auth part of the url. In module versions < 0.9.1 the auth portion of the url is outputted as part of the grunt tasks logging function. If this output is publicly available then the credentials should be considered compromised.

It has been reported that KIE server and Busitess Central before version 7.21.0.Final contain username and password as plaintext Java properties. Any app deployed on the same server would have access to these properties, thus granting access to ther services.

A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.

BMC Track-It! 11.4 before Hotfix 3 exposes an unauthenticated .NET remoting configuration service (ConfigurationService) on port 9010. This service contains a method that can be used to retrieve a configuration file that contains the application database name, username and password as well as the domain administrator username and password. These are encrypted with a fixed key and IV ("NumaraIT") using the DES algorithm. The domain administrator username and password can only be obtained if the Self-Service component is enabled, which is the most common scenario in enterprise deployments.

Green Packet DX-350 uses non-random default credentials of: root:wimax. A remote network attacker can gain privileged access to a vulnerable device.

Synology NAS servers DS107, firmware version 3.1-1639 and prior, and DS116, DS213, firmware versions prior to 5.2-5644-1, use non-random default credentials of: guest:(blank) and admin:(blank) . A remote network attacker can gain privileged access to a vulnerable device.

Webvisit in Phoenix Contact ILC PLCs offers a password macro to protect HMI pages on the PLC against casual or coincidental opening of HMI pages by the user. The password macro can be configured in a way that the password is stored and transferred in clear text.

Intellian Satellite TV antennas t-Series and v-Series, firmware version 1.07, uses non-random default credentials of: ftp/ftp or intellian:12345678. A remote network attacker can gain elevated access to a vulnerable device.

MySQL for PCF tiles 1.7.x before 1.7.10 were discovered to log the AWS access key in plaintext. These credentials were logged to the Service Backup component logs, and not the system log, thus were not exposed outside the Service Backup VM.

MailEnable before 8.60 allows Privilege Escalation because admin accounts could be created as a consequence of %0A mishandling in AUTH.TAB after a password-change request.