A vulnerability was found in Tenda AC10U 15.03.06.48/15.03.06.49. It has been rated as critical. This issue affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257777 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical has been found in Tenda AC18 15.03.05.05. Affected is the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-257778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A remote unauthorized access vulnerability was discovered in Aruba AirWave Management Platform version(s) prior to 8.2.12.1. Aruba has released patches for AirWave Management Platform that address this security vulnerability.
IBM Security Guardium 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 124633.
An improper neutralization of special elements used in an OS command vulnerability in the command line interpreter of FortiAuthenticator before 6.3.1 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.
programs/pluto/xauth.c in the client in Openswan 2.6.25 through 2.6.28 allows remote authenticated gateways to execute arbitrary commands via shell metacharacters in (1) cisco_dns_info or (2) cisco_domain_info data in a packet, a different vulnerability than CVE-2010-3302.
A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257667. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
programs/pluto/xauth.c in the client in Openswan 2.6.26 through 2.6.28 allows remote authenticated gateways to execute arbitrary commands via shell metacharacters in the cisco_banner (aka server_banner) field, a different vulnerability than CVE-2010-3308.
EPrints 3.4.2 allows remote attackers to execute arbitrary commands via crafted input to the verb parameter in a cgi/toolbox/toolbox URI.
Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.
T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.
A vulnerability, which was classified as critical, has been found in Totolink X6000R 9.4.0cu.852_20230719. This issue affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation of the argument ip leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-256313 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
This affects the package portprocesses before 1.0.5. If (attacker-controlled) user input is given to the killProcess function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.
A vulnerability has been found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This vulnerability affects the function setTracerouteCfg. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-237514 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.
IBM MQ Appliance 8.0 and 9.0 could allow an authenticated messaging administrator to execute arbitrary commands on the system, caused by command execution. IBM X-Force ID: 125730.
On version 16.0.x before 16.0.1.2, 15.1.x before 15.1.3, 14.1.x before 14.1.4.1, 13.1.x before 13.1.4, 12.1.x before 12.1.6, and 11.6.x before 11.6.5.3, an authenticated user may perform a privilege escalation on the BIG-IP Advanced WAF and ASM Configuration utility. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation, resulting in a root shell. An attacker can inject OS commands into the ip= parm in the "/goform/net_WebPingGetValue" URI to trigger this vulnerability.
This affects the package kill-by-port before 0.0.2. If (attacker-controlled) user input is given to the killByPort function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.
A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function cgiMain of the file /cgi-bin/upload.cgi. Executing manipulation of the argument filename can lead to os command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in LB-LINK BL-X26 1.2.8. The impacted element is an unknown function of the file /goform/set_hidessid_cfg of the component HTTP Handler. This manipulation of the argument enable causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the CN= parm in the "/goform/net_WebCSRGen" uri to trigger this vulnerability.
The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.
A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.
An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the rsakey\_name= parm in the "/goform/WebRSAKEYGen" uri to trigger this vulnerability.
AutoGPT, a component of significant-gravitas/autogpt, is vulnerable to an improper neutralization of special elements used in an OS command ('OS Command Injection') due to a flaw in its shell command validation function. Specifically, the vulnerability exists in versions v0.5.0 up to but not including 5.1.0. The issue arises from the application's method of validating shell commands against an allowlist or denylist, where it only checks the first word of the command. This allows an attacker to bypass the intended restrictions by crafting commands that are executed despite not being on the allowlist or by including malicious commands not present in the denylist. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary shell commands.
vSphere Replication 8.3.x prior to 8.3.1.2, 8.2.x prior to 8.2.1.1, 8.1.x prior to 8.1.2.3 and 6.5.x prior to 6.5.1.5 contain a post-authentication command injection vulnerability which may allow an authenticated admin user to perform a remote code execution.
XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.
Dell OpenManage Enterprise-Modular (OME-M) versions prior to 1.30.00 contain a security bypass vulnerability. An authenticated malicious user with low privileges may potentially exploit the vulnerability to escape from the restricted environment and gain access to sensitive information in the system, resulting in information disclosure and elevation of privilege.
A vulnerability was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This issue affects the function setWanCfg. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-237515. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
An issue was discovered in Open-AudIT 3.2.2. There is OS Command injection in Discovery.
A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.
A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Control Web Panel mysql_manager Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Control Web Panel. Authentication is required to exploit this vulnerability. The specific flaw exists within the mysql_manager module. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21080.
We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.
ActiveX Control(HShell.dll) in Handy Groupware 1.7.3.1 for Windows 7, 8, and 10 allows an attacker to execute arbitrary command via the ShellExec method.
A vulnerability, which was classified as critical, has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected by this issue is some unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
Control Web Panel dns_zone_editor Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Control Web Panel. Authentication is required to exploit this vulnerability. The specific flaw exists within the dns_zone_editor module. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20581.
A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.
codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596.
The package ng-packagr before 10.1.1 are vulnerable to Command Injection via the styleIncludePaths option.
A vulnerability classified as critical was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this vulnerability is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Virtual Server.
A vulnerability, which was classified as critical, has been found in WeiYe-Jing datax-web 2.1.2. Affected by this issue is some unknown functionality of the file /api/log/killJob of the component HTTP POST Request Handler. The manipulation of the argument processId leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249086 is the identifier assigned to this vulnerability.
A vulnerability was found in Byzoro Smart S45F Multi-Service Secure Gateway Intelligent Management Platform up to 20230928 and classified as critical. Affected by this issue is some unknown functionality of the file /log/download.php. The manipulation of the argument file leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-241646 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by invoking an interface monitoring mechanism with a crafted argument on the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
Zoho ManageEngine Asset Explorer 6.5 does not validate the System Center Configuration Manager (SCCM) database username when dynamically generating a command to schedule scans for SCCM. This allows an attacker to execute arbitrary commands on the AssetExplorer Server with NT AUTHORITY/SYSTEM privileges.
Command Injection in minPlayCommand.php in Centreon (19.04.4 and below) allows an attacker to achieve command injection via a plugin test.