A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

The setSystemTime function in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote authenticated users to execute arbitrary commands via a ';' in the ntpServer argument. NOTE: this issue exists because of an incomplete fix for CVE-2017-2849.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

ABAP Tests Modules (SAP Basis, versions 7.0, 7.1, 7.3, 7.31, 7.4, 7.5) of SAP NetWeaver Process Integration enables an attacker the execution of OS commands with privileged rights. An attacker could thereby impact the integrity and availability of the system.

Accellion Secure File Transfer Appliance before 8_0_105 allows remote authenticated administrators to bypass the restricted shell and execute arbitrary commands via shell metacharacters to the ping command, as demonstrated by modifying the cli program.

A user with administrative privileges in Distributed Data Systems WebHMI 4.1.1.7662 may send OS commands to execute on the host server.

pfSense before 2.3 allows remote authenticated users to execute arbitrary OS commands via a '|' character in the status_rrd_graph_img.php graph parameter, related to _rrd_graph_img.php.

VMware Carbon Black App Control (8.5.x prior to 8.5.14, 8.6.x prior to 8.6.6, 8.7.x prior to 8.7.4 and 8.8.x prior to 8.8.2) contains an OS command injection vulnerability. An authenticated, high privileged malicious actor with network access to the VMware App Control administration interface may be able to execute commands on the server due to improper input validation leading to remote code execution.

operation/agentes/networkmap.php in Pandora FMS before 3.1.1 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the layout parameter in an operation/agentes/networkmap action to index.php.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.

Seeds acmailer before 3.8.21 and 3.9.x before 3.9.15 Beta allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

An exploitable authenticated command-injection vulnerability exists in the web server functionality of Moxa NPort W2x50A products with firmware before 2.2 Build_18082311. A specially crafted HTTP POST request to /goform/net_WebPingGetValue can result in running OS commands as the root user. This is similar to CVE-2017-12120.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Secure Network Analytics, formerly Cisco Stealthwatch Enterprise, could allow an authenticated, remote attacker to execute arbitrary commands as an administrator on the underlying operating system. This vulnerability is due to insufficient user input validation by the web-based management interface of the affected software. An attacker could exploit this vulnerability by injecting arbitrary commands in the web-based management interface. A successful exploit could allow the attacker to make configuration changes on the affected device or cause certain services to restart unexpectedly.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system. Note: The NX-API feature is disabled by default.

diag_ping.cmd on D-Link DSL-2640U devices with firmware IM_1.00 and ME_1.00, and DSL-2540U devices with firmware ME_1.00, allows authenticated remote attackers to execute arbitrary OS commands via shell metacharacters in the ipaddr field of an HTTP GET request.

A vulnerability has been identified in SINEC NMS (All versions < V1.0 SP2). The affected application incorrectly neutralizes special elements when creating batch operations which could lead to command injection. An authenticated remote attacker with administrative privileges could exploit this vulnerability to execute arbitrary code on the system with system privileges.

Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack.

PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL.

An issue was discovered on AudioCodes 450HD IP Phone devices with firmware 3.0.0.535.106. The traceroute and ping functionality, which uses a parameter in a request to command.cgi from the Monitoring page in the web UI, unsafely puts user-alterable data directly into an OS command, leading to Remote Code Execution via shell metacharacters in the query string.

A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability, which was classified as critical, has been found in Poly Trio 8300, Trio 8500, Trio 8800, Trio C60, CCX 350, CCX 400, CCX 500, CCX 505, CCX 600, CCX 700, EDGE E100, EDGE E220, EDGE E300, EDGE E320, EDGE E350, EDGE E400, EDGE E450, EDGE E500, EDGE E550, VVX 101, VVX 150, VVX 201, VVX 250, VVX 300, VVX 301, VVX 310, VVX 311, VVX 350, VVX 400, VVX 401, VVX 410, VVX 411, VVX 450, VVX 500, VVX 501, VVX 600 and VVX 601. This issue affects some unknown processing of the component Diagnostic Telnet Mode. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. The identifier VDB-249257 was assigned to this vulnerability.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_battery_mode` POST parameter.

OS Command Injection in Packagist microweber/microweber prior to 1.2.11.

An exploitable command injection vulnerability exists in the ACEManager iplogging.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can inject arbitrary commands, resulting in arbitrary command execution. An attacker can send an authenticated HTTP request to trigger this vulnerability.

An authenticated user may be able to misuse parameters to inject arbitrary operating system commands into mySCADA myPRO versions 8.25.0 and prior.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

iBall iB-WRA150N 1.2.6 build 110401 Rel.47776n devices allow remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping test arguments on the Diagnostics page.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_ac_mode` POST parameter parameter.

An exploitable command injection vulnerability exists in the measurementBitrateExec functionality of Sony IPELA E Series Network Camera G5 firmware 1.87.00. A specially crafted GET request can cause arbitrary commands to be executed. An attacker can send an HTTP request to trigger this vulnerability.

Jenkins 2.73.1 and earlier, 2.83 and earlier users with permission to create or configure agents in Jenkins could configure a launch method called 'Launch agent via execution of command on master'. This allowed them to run arbitrary shell commands on the master node whenever the agent was supposed to be launched. Configuration of this launch method now requires the Run Scripts permission typically only granted to administrators.

Ubiquiti EdgeOS 1.9.1 on EdgeRouter Lite devices allows remote attackers to execute arbitrary code with admin credentials, because /opt/vyatta/share/vyatta-cfg/templates/system/static-host-mapping/host-name/node.def does not sanitize the 'alias' or 'ips' parameter for shell metacharacters.

IBM BigFix Platform 9.0, 9.1 before 9.1.8, and 9.2 before 9.2.8 allow remote authenticated users to execute arbitrary commands by leveraging report server access. IBM X-Force ID: 111302.

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

www/soap/application/MCSoap/Logs.php in MailCleaner Community Edition 2018.08 allows remote attackers to execute arbitrary OS commands.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.