An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.

Buffer overflow on Dasan GPON ONT WiFi Router H640X 12.02-01121 2.77p1-1124 and 3.03p2-1146 devices allows remote attackers to execute arbitrary code via a long POST request to the login_action function in /cgi-bin/login_action.cgi (aka cgipage.cgi).

Dasan Networks - W-Web versions 1.22-1.27 - CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

An authentication bypass issue was discovered in Dasan Switch DS2924 web based interface, firmware versions 1.01.18 and 1.02.00, allowing attackers to gain escalated privileges via storing crafted cookies in the web browser.

JeeWMS 771e4f5d0c01ffdeae1671be4cf102b73a3fe644 (2025-05-19) contains incorrect authentication bypass vulnerability, which can lead to arbitrary file reading.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and uploading of files.

A vulnerability was identified in liangliangyy DjangoBlog up to 2.1.0.0. The impacted element is an unknown function of the file owntracks/views.py of the component logtracks Endpoint. The manipulation leads to missing authentication. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in TransformerOptimus SuperAGI up to 0.0.14. Affected by this issue is the function get_vector_db_details of the file superagi/controllers/vector_dbs.py of the component Vector Database Management Endpoint. Executing a manipulation can lead to missing authentication. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

eSyndiCat 1.6 allows remote attackers to bypass authentication and gain administrative access by setting the admin_lng cookie value to 1. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to versions 7.8.6, 7.9.8, 7.10.7, 7.11.4, 7.12.4, 7.13.3, and 8.0.0, a critical authentication bypass vulnerability exists in Rocket.Chat's account service used in the ddp-streamer micro service that allows an attacker to log in to the service as any user with a password set, using any arbitrary password. The vulnerability stems from a missing await keyword when calling an asynchronous password validation function, causing a Promise object (which is always truthy) to be evaluated instead of the actual boolean validation result. This may lead to account takeover of any user whose username is known or guessable. This issue has been patched in versions 7.8.6, 7.9.8, 7.10.7, 7.11.4, 7.12.4, 7.13.3, and 8.0.0.

A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Java remote method invocation (RMI) input port in GE MDS PulseNET and MDS PulseNET Enterprise version 3.2.1 and prior may be exploited to allow unauthenticated users to launch applications and support remote code execution through web services.

The jrCookie function in includes/jamroom-misc.inc.php in JamRoom before 3.4.0 allows remote attackers to bypass authentication and gain administrative access via a boolean value within serialized data in a JMU_Cookie cookie.

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0670.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and download of files.

A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password value to an affected portal when prompted to enter an administrative password for the portal. A successful exploit could allow the attacker to bypass authentication and gain administrator privileges for the web-based service portal of the affected software. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg29809.

A vulnerability in the API gateway of the Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and access critical services. The vulnerability is due to a failure to normalize URLs prior to servicing requests. An attacker could exploit this vulnerability by submitting a crafted URL designed to exploit the issue. A successful exploit could allow the attacker to gain unauthenticated access to critical services, resulting in elevated privileges in DNA Center. This vulnerability affects Cisco DNA Center Software Releases prior to 1.1.2. Cisco Bug IDs: CSCvi09394.

wolfSSH’s key exchange state machine can be manipulated to leak the client’s password in the clear, trick the client to send a bogus signature, or trick the client into skipping user authentication. This affects client applications with wolfSSH version 1.4.21 and earlier. Users of wolfSSH must update or apply the fix patch and it’s recommended to update credentials used. This fix is also recommended for wolfSSH server applications. While there aren’t any specific attacks on server applications, the same defect is present. Thanks to Aina Toky Rasoamanana of Valeo and Olivier Levillain of Telecom SudParis for the report.

A security vulnerability has been detected in JeecgBoot 3.9.0/3.9.1. The impacted element is an unknown function of the file jeecg-boot/jeecg-module-system/jeecg-system-biz/src/main/java/org/jeecg/modules/airag/JeecgBizToolsProvider.java of the component AI Chat Module. Such manipulation leads to missing authentication. The attack can be executed remotely. The name of the patch is b7c9aeba7aefda9e008ea8fe4fc3daf08d0c5b39/2c1cc88b8d983868df8c520a343d6ff4369d9e59. It is best practice to apply a patch to resolve this issue. The project fixed the issue with a commit which shall be part of the next official release.

A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with network access to the SiPass integrated server to bypass the authentication mechanism and perform administrative operations.

INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0669.

The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE.

A vulnerability has been found in didi DDMQ 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the component Console Module. The manipulation with the input /;login leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw was found in Red Hat DataGrid 8.x (8.0.0, 8.0.1, 8.1.0 and 8.1.1) and Infinispan (10.0.0 through 12.0.0). An attacker could bypass authentication on all REST endpoints when DIGEST is used as the authentication method. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

The National Payments Corporation of India BHIM application 1.3 for Android uses a custom keypad for which the input element is available to the Accessibility service, which makes it easier for attackers to bypass authentication.

Missing authentication for the remote configuration port 1236/tcp on the Cohu 3960HD allows an attacker to change configuration parameters such as IP address and username/password via specially crafted XML SOAP packets.

PKCE was implemented in the OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp . However, it was found that an attacker could cause the check to be skipped. Fixed in: https://github.com/cloudflare/workers-oauth-provider/pull/27 https://github.com/cloudflare/workers-oauth-provider/pull/27 Impact: PKCE is a defense-in-depth mechanism against certain kinds of attacks and was an optional extension in OAuth 2.0 which became required in the OAuth 2.1 draft. (Note that the MCP specification requires OAuth 2.1.). This bug completely bypasses PKCE protection.

Gessler GmbH WEB-MASTER has a restoration account that uses weak hard coded credentials and if exploited could allow an attacker control over the web management of the device.

NetIQ eDirectory before 9.0 SP4 did not enforce login restrictions when "ebaclient" was used, allowing unpermitted access to eDirectory services.

The Sign In With Google plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.8.0. This is due to the 'authenticate_user' user function not implementing sufficient null value checks when setting the access token and user information. This makes it possible for unauthenticated attackers to log in as the first user who has signed in using Google OAuth, which could be the site administrator.

An Improper Authentication issue was discovered in PDQ Manufacturing LaserWash G5 and G5 S Series all versions, LaserWash M5, all versions, LaserWash 360 and 360 Plus, all versions, LaserWash AutoXpress and AutoExpress Plus, all versions, LaserJet, all versions, ProTouch Tandem, all versions, ProTouch ICON, all versions, and ProTouch AutoGloss, all versions. The web server does not properly verify that provided authentication information is correct.

Session fixation vulnerability in Jetbox CMS 2.1 SR1 allows remote attackers to hijack web sessions via a crafted link and the administrator section.

The National Payments Corporation of India BHIM application 1.3 for Android does not properly restrict use of the OTP feature, which makes it easier for attackers to bypass authentication.

Creative Guestbook 1.0 allows remote attackers to add an administrative account via a direct request to createadmin.php with Name, Email, and PASSWORD parameters set.

A vulnerability was identified in Totolink A8000R 5.9c.681_B20180413. This issue affects the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument langType leads to missing authentication. The attack can be launched remotely. The exploit is publicly available and might be used.

js/pages/pages_data.php in AuraCMS 2.2 through 2.2.2 does not perform authentication, which allows remote attackers to add, edit, and delete web content via a modified id parameter.

admin/index.php in Maian Links 3.1 and earlier allows remote attackers to bypass authentication and gain administrative access by sending an arbitrary links_cookie cookie.

A vulnerability was found in Shanxi Diankeyun Technology NODERP up to 6.0.2 and classified as critical. This issue affects some unknown processing of the file application/index/common.php of the component Cookie Handler. The manipulation of the argument Nod_User_Id/Nod_User_Token leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252275. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Epikur before 20.1.1. The Epikur server contains the checkPasswort() function that, upon user login, checks the submitted password against the user password's MD5 hash stored in the database. It is also compared to a second MD5 hash, which is the same for every user (aka a "Backdoor Password" of 3p1kursupport). If the submitted password matches either one, access is granted.

An authentication bypass vulnerability exists in Arcserve Unified Data Protection 9.2 and 8.1 in the edge-app-base-webui.jar!com.ca.arcserve.edge.app.base.ui.server.EdgeLoginServiceImpl.doLogin() function within wizardLogin.

A vulnerability classified as critical was found in Sichuan Yougou Technology KuERP up to 1.0.4. Affected by this vulnerability is the function checklogin of the file /application/index/common.php. The manipulation of the argument App_User_id/App_user_Token leads to improper authentication. The exploit has been disclosed to the public and may be used. The identifier VDB-252253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).

OpenMetadata is a unified platform for discovery, observability, and governance powered by a central metadata repository, in-depth lineage, and seamless team collaboration. The `JwtFilter` handles the API authentication by requiring and verifying JWT tokens. When a new request comes in, the request's path is checked against this list. When the request's path contains any of the excluded endpoints the filter returns without validating the JWT. Unfortunately, an attacker may use Path Parameters to make any path contain any arbitrary strings. For example, a request to `GET /api/v1;v1%2fusers%2flogin/events/subscriptions/validation/condition/111` will match the excluded endpoint condition and therefore will be processed with no JWT validation allowing an attacker to bypass the authentication mechanism and reach any arbitrary endpoint, including the ones listed above that lead to arbitrary SpEL expression injection. This bypass will not work when the endpoint uses the `SecurityContext.getUserPrincipal()` since it will return `null` and will throw an NPE. This issue may lead to authentication bypass and has been addressed in version 1.2.4. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-237`.

Tyler Technologies Court Case Management Plus allows a remote attacker to authenticate as any user by manipulating at least the 'CmWebSearchPfp/Login.aspx?xyzldk=' and 'payforprint_CM/Redirector.ashx?userid=' parameters. The vulnerable "pay for print" feature was removed on or around 2023-11-01.

A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.