A vulnerability classified as critical has been found in Sichuan Yougou Technology KuERP up to 1.0.4. Affected is an unknown function of the file /runtime/log. The manipulation leads to improper output neutralization for logs. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252252. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, has been found in Sichuan Yougou Technology KuERP up to 1.0.4. Affected by this issue is the function del_sn_db of the file /application/index/controller/Service.php. The manipulation of the argument file leads to path traversal: '../filedir'. The exploit has been disclosed to the public and may be used. VDB-252254 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

JeeWMS 771e4f5d0c01ffdeae1671be4cf102b73a3fe644 (2025-05-19) contains incorrect authentication bypass vulnerability, which can lead to arbitrary file reading.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and uploading of files.

Rocket.Chat is an open-source, secure, fully customizable communications platform. Prior to versions 7.8.6, 7.9.8, 7.10.7, 7.11.4, 7.12.4, 7.13.3, and 8.0.0, a critical authentication bypass vulnerability exists in Rocket.Chat's account service used in the ddp-streamer micro service that allows an attacker to log in to the service as any user with a password set, using any arbitrary password. The vulnerability stems from a missing await keyword when calling an asynchronous password validation function, causing a Promise object (which is always truthy) to be evaluated instead of the actual boolean validation result. This may lead to account takeover of any user whose username is known or guessable. This issue has been patched in versions 7.8.6, 7.9.8, 7.10.7, 7.11.4, 7.12.4, 7.13.3, and 8.0.0.

A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and download of files.

BN-SDWBP3 firmware version 1.0.9 and earlier allows an attacker on the same network segment to bypass authentication to access to the management screen and execute an arbitrary command via unspecified vectors.

wolfSSH’s key exchange state machine can be manipulated to leak the client’s password in the clear, trick the client to send a bogus signature, or trick the client into skipping user authentication. This affects client applications with wolfSSH version 1.4.21 and earlier. Users of wolfSSH must update or apply the fix patch and it’s recommended to update credentials used. This fix is also recommended for wolfSSH server applications. While there aren’t any specific attacks on server applications, the same defect is present. Thanks to Aina Toky Rasoamanana of Valeo and Olivier Levillain of Telecom SudParis for the report.

The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE.

A flaw was found in Red Hat DataGrid 8.x (8.0.0, 8.0.1, 8.1.0 and 8.1.1) and Infinispan (10.0.0 through 12.0.0). An attacker could bypass authentication on all REST endpoints when DIGEST is used as the authentication method. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

PKCE was implemented in the OAuth implementation in workers-oauth-provider that is part of MCP framework https://github.com/cloudflare/workers-mcp . However, it was found that an attacker could cause the check to be skipped. Fixed in: https://github.com/cloudflare/workers-oauth-provider/pull/27 https://github.com/cloudflare/workers-oauth-provider/pull/27 Impact: PKCE is a defense-in-depth mechanism against certain kinds of attacks and was an optional extension in OAuth 2.0 which became required in the OAuth 2.1 draft. (Note that the MCP specification requires OAuth 2.1.). This bug completely bypasses PKCE protection.

Gessler GmbH WEB-MASTER has a restoration account that uses weak hard coded credentials and if exploited could allow an attacker control over the web management of the device.

The Sign In With Google plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.8.0. This is due to the 'authenticate_user' user function not implementing sufficient null value checks when setting the access token and user information. This makes it possible for unauthenticated attackers to log in as the first user who has signed in using Google OAuth, which could be the site administrator.

An issue was discovered in Epikur before 20.1.1. The Epikur server contains the checkPasswort() function that, upon user login, checks the submitted password against the user password's MD5 hash stored in the database. It is also compared to a second MD5 hash, which is the same for every user (aka a "Backdoor Password" of 3p1kursupport). If the submitted password matches either one, access is granted.

An authentication bypass vulnerability exists in Arcserve Unified Data Protection 9.2 and 8.1 in the edge-app-base-webui.jar!com.ca.arcserve.edge.app.base.ui.server.EdgeLoginServiceImpl.doLogin() function within wizardLogin.

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

OpenMetadata is a unified platform for discovery, observability, and governance powered by a central metadata repository, in-depth lineage, and seamless team collaboration. The `JwtFilter` handles the API authentication by requiring and verifying JWT tokens. When a new request comes in, the request's path is checked against this list. When the request's path contains any of the excluded endpoints the filter returns without validating the JWT. Unfortunately, an attacker may use Path Parameters to make any path contain any arbitrary strings. For example, a request to `GET /api/v1;v1%2fusers%2flogin/events/subscriptions/validation/condition/111` will match the excluded endpoint condition and therefore will be processed with no JWT validation allowing an attacker to bypass the authentication mechanism and reach any arbitrary endpoint, including the ones listed above that lead to arbitrary SpEL expression injection. This bypass will not work when the endpoint uses the `SecurityContext.getUserPrincipal()` since it will return `null` and will throw an NPE. This issue may lead to authentication bypass and has been addressed in version 1.2.4. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-237`.

Tyler Technologies Court Case Management Plus allows a remote attacker to authenticate as any user by manipulating at least the 'CmWebSearchPfp/Login.aspx?xyzldk=' and 'payforprint_CM/Redirector.ashx?userid=' parameters. The vulnerable "pay for print" feature was removed on or around 2023-11-01.

An authentication bypass vulnerability exists in HPE StoreOnce Software.

Ilevia EVE X1/X5 Server version ≤ 4.7.18.0.eden contains a vulnerability in its authentication mechanism. Unsanitized input is passed to a system() call for authentication, allowing attackers to inject special characters and manipulate command parsing. Due to the binary's interpretation of non-zero exit codes as successful authentication, remote attackers can bypass authentication and gain full access to the system.

On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials.

Authentication bypass vulnerability in Amazing Little Poll affecting versions 1.3 and 1.4. This vulnerability could allow an unauthenticated user to access the admin panel without providing any credentials by simply accessing the "lp_admin.php?adminstep=" parameter.

A vulnerability was found in OneNav up to 0.9.33. It has been classified as critical. This affects an unknown part of the file /index.php?c=api of the component API. The manipulation of the argument X-Token leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249765 was assigned to this vulnerability.

A vulnerability in the authentication logic of Wyze Cam Pan v2, Cam v2, Cam v3 allows an attacker to bypass login and control the devices. This issue affects: Wyze Cam Pan v2 versions prior to 4.49.1.47. Wyze Cam v2 versions prior to 4.9.8.1002. Wyze Cam v3 versions prior to 4.36.8.32.

A vulnerability classified as critical has been found in ColumbiaSoft Document Locator. This affects an unknown part of the file /api/authentication/login of the component WebTools. The manipulation of the argument Server leads to improper authentication. It is possible to initiate the attack remotely. Upgrading to version 7.2 SP4 and 2021.1 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-243729 was assigned to this vulnerability.

An issue was discovered on COROS PACE 3 devices through 3.0808.0. It identifies itself as a device without input or output capabilities, which results in the use of the Just Works pairing method. This method does not implement any authentication, which therefore allows machine-in-the-middle attacks. Furthermore, this lack of authentication allows attackers to interact with the device via BLE without requiring prior authorization.

The web application portal of the Cobham EXPLORER 710, firmware version 1.07, allows unauthenticated access to port 5454. This could allow an unauthenticated, remote attacker to connect to this port via Telnet and execute 86 Attention (AT) commands, including some that provide unauthenticated, shell-like access to the device.

Improper Authentication vulnerability in Abdul Hakeem Build App Online allows Privilege Escalation.This issue affects Build App Online: from n/a through 1.0.19.

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

A CWE-287: Improper Authentication vulnerability exists in the NET55XX Encoder with firmware prior to version 2.1.9.7 which could cause impact to confidentiality, integrity, and availability when a remote attacker crafts a malicious request to the encoder webUI.

CrateDB 5.5.1 is contains an authentication bypass vulnerability in the Admin UI component. After configuring password authentication and_ Local_ In the case of an address, identity authentication can be bypassed by setting the X-Real IP request header to a specific value and accessing the Admin UI directly using the default user identity.(https://github.com/crate/crate/issues/15231)

Improper Authentication vulnerability in wp-buy Login as User or Customer (User Switching) allows Privilege Escalation.This issue affects Login as User or Customer (User Switching): from n/a through 3.8.

PR100088 Modbus gateway versions prior to Release R02 (or Software Version 1.1.13166) may allow an attacker to be able to change the password for an admin user who is currently or previously logged in, provided the device has not been restarted.

Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. An attacker who is in the same subnetwork of the camera or has remote administrator access can fully compromise the device by performing a firmware recovery using a custom image.

Hirschmann Industrial HiVision versions prior to 06.0.07 and 07.0.03 contains an authentication bypass vulnerability in the master service that allows unauthenticated remote attackers to execute arbitrary commands with administrative privileges. Attackers can invoke exposed interface methods over the remote service to bypass authentication and achieve remote code execution on the underlying operating system.

Huawei products IPS Module; NGFW Module; NIP6300; NIP6600; NIP6800; Secospace USG6300; Secospace USG6500; Secospace USG6600; USG9500 with versions of V500R001C00; V500R001C20; V500R001C30; V500R001C50; V500R001C60; V500R001C80; V500R005C00; V500R005C10; V500R005C20; V500R002C00; V500R002C10; V500R002C20; V500R002C30 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.

A vulnerability, which was classified as critical, was found in Itech Job Portal Script 9.13. This affects an unknown part of the file /admin. The manipulation leads to improper authentication. It is possible to initiate the attack remotely.

Improper Authentication vulnerability in Repute Infosystems BookingPress allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects BookingPress: from n/a through 1.0.74.

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

Dataiku DSS before 11.4.5 and 12.4.1 has Incorrect Access Control that could lead to a full authentication bypass.

Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, R6400 before 1.0.1.20, R6700 before 1.0.1.20, R6900 before 1.0.1.20, R7000 before 1.0.7.10, R7100LG before V1.0.0.32, R7300DST before 1.0.0.52, R7900 before 1.0.1.16, R8000 before 1.0.3.36, R8300 before 1.0.2.94, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.12, and WNR3500Lv2 before 1.2.0.40.

An issue was discovered in Mattermost Server before 4.0.0, 3.10.2, and 3.9.2. A password-reset request was sometime sent to an attacker-provided e-mail address.

Certain NETGEAR devices are affected by authentication bypass. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, R8500 before 1.0.2.74, and WNR2000v2 before 1.2.0.8.

Certain NETGEAR devices are affected by authentication bypass. This affects D6220 before 1.0.0.28, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.8, R6400 before 1.0.1.22, R6400v2 before 1.0.2.32, R7100LG before 1.0.0.32, R7300DST before 1.0.0.52, R8300 before 1.0.2.94, and R8500 before 1.0.2.100.

Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, PLW1000v2 before 1.0.0.14, and PLW1010v2 before 1.0.0.14.

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

WeGIA is a Web manager for charitable institutions. A security vulnerability was identified in versions prior to 3.2.6, where it is possible to change a user's password without verifying the old password. This issue exists in the control.php endpoint and allows unauthorized attackers to bypass authentication and authorization mechanisms to reset the password of any user, including admin accounts. Version 3.2.6 fixes the issue.