An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wlan_access name.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_host_2g power.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for hosts_info set_block_flag up_limit.

A vulnerability was found in TP-LINK TL-WR841ND up to 20240920. It has been rated as critical. Affected by this issue is some unknown functionality of the file /userRpm/popupSiteSurveyRpm.htm. The manipulation of the argument ssid leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_wds_2g ssid.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for ip_mac_bind name.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_host_2g isolate.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for dhcpd udhcpd enable.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for protocol wan wan_rate.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for firewall dmz enable.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for firewall lan_manage mac2.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for time_switch name.

TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow DoSing the HTTP server via a crafted Cookie header to the /cgi/ansi URI.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for hosts_info para sun.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for reboot_timer name.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for ddns phddns username.

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for wireless wlan_host_2g bandwidth.

The ping feature in the Diagnostic functionality on TP-LINK WR840N v2 Firmware 3.16.9 Build 150701 Rel.51516n devices allows remote attackers to cause a denial of service (HTTP service termination) by modifying the packet size to be higher than the UI limit of 1472.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `band` parameter at offset `0x0045aad8` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `profile` parameter at offset `0x0045abc8` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x422448` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x0045ab38` of the `httpd_portal` binary shipped with v5.1.0 Build 20220926 of the EAP225.

A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `ssid` parameter at offset `0x42247c` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115.

A memory corruption vulnerability exists in the web interface functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted HTTP POST request can lead to denial of service of the device's web interface. An attacker can send an unauthenticated HTTP POST request to trigger this vulnerability.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function uninstallPluginReqHandle.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function RegisterRegister.

TP-Link TL-WDR7660 2.0.30 has a stack overflow vulnerability via the function deviceInfoJsonToBincauses.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function chkResetVeriRegister.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function getRegVeriRegister.

TP-Link Tapo C210 ActiveCells Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Tapo C210 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the ActiveCells parameter of the CreateRules and ModifyRules APIs. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20589.

TP-Link TL-WR941ND V6 were discovered to contain a buffer overflow via the pSize parameter at /userRpm/PingIframeRpm.

TP-Link Archer AX21(US)_V3_1.1.4 Build 20230219 and AX21(US)_V3.6_1.1.4 Build 20230219 are vulnerable to Buffer Overflow.

Stack-based buffer overflow in the httpd server of TP-Link WR1043nd (Firmware Version 3) allows remote attackers to execute arbitrary code via a malicious MediaServer request to /userRpm/MediaServerFoldersCfgRpm.htm.

TP-Link EC-70 devices through 2.3.4 Build 20220902 rel.69498 have a Buffer Overflow.

A stack-based buffer overflow in the tmpServer module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to trigger a segmentation fault and potentially execute arbitrary code via a specially crafted configuration file. Successful exploitation may cause a crash and could allow arbitrary code execution, enabling modification of device state, exposure of sensitive data, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213.

The web interface on multiple Omada switches does not adequately validate certain external inputs, which may lead to out-of-bound memory access when processing crafted requests. Under specific conditions, this flaw may result in unintended command execution.<br>An unauthenticated attacker with network access to the affected interface may cause memory corruption, service instability, or information disclosure. Successful exploitation may allow remote code execution or denial-of-service.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the 'ip' parameter at /userRpm/WanStaticIpV6CfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11, triggered by the dnsserver1 and dnsserver2 parameters at /userRpm/WanSlaacCfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

In TP-Link routers, Archer C5 and WR710N-V1, running the latest available code, when receiving HTTP Basic Authentication the httpd service can be sent a crafted packet that causes a heap overflow. This can result in either a DoS (by crashing the httpd process) or an arbitrary code execution.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of file name extensions. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13910.

A stack overflow in the function DM_ In fillobjbystr() of TP-Link Archer C50&A5(US)_V5_200407 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

TP-Link TL-WDR7660 2.0.30, Mercury D196G 20200109_2.0.4, and Fast FAC1900R 20190827_2.0.2 routers have a stack overflow issue in `MmtAtePrase` function. Local users could get remote code execution.

TP-Link TL-WDR7660 2.0.30, Mercury D196G 20200109_2.0.4, and Fast FAC1900R 20190827_2.0.2 routers have a stack overflow issue in `MntAte` function. Local users could get remote code execution.

TL-WR841Nv14_US_0.9.1_4.18 routers were discovered to contain a stack overflow in the function dm_fillObjByStr(). This vulnerability allows unauthenticated attackers to execute arbitrary code.

TP-Link Archer A54 Archer A54(US)_V1_210111 routers were discovered to contain a stack overflow in the function DM_ Fillobjbystr(). This vulnerability allows unauthenticated attackers to execute arbitrary code.

TP-Link TL-WR902AC(US)_V3_191209 routers were discovered to contain a stack overflow in the function DM_ Fillobjbystr(). This vulnerability allows unauthenticated attackers to execute arbitrary code.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13993.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the pskSecret parameter at /userRpm/WlanSecurityRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.