manageuser.php in Collabtive before 0.7.6 allows remote authenticated users, and possibly unauthenticated attackers, to bypass intended access restrictions and upload and execute arbitrary files by uploading an avatar file with an accepted Content-Type such as image/jpeg, then accessing it via a direct request to the file in files/standard/avatar.

Moodle 1.9.x before 1.9.16, 2.0.x before 2.0.7, 2.1.x before 2.1.4, and 2.2.x before 2.2.1 does not validate e-mail address settings, which allows remote authenticated users to have an unspecified impact via a crafted address.

In cPanel before 62.0.4, Exim piped filters ran in the context of an incorrect user account when delivering to a system user (SEC-204).

IBM QRadar 7.2 and 7.3 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 134178.

SAS Drug Development (SDD) before 32DRG02 mishandles logout actions, which allows a user (who was previously logged in) to access resources by pressing a back or forward button in a web browser.

Due to insufficient input validation of Kyma, authenticated users can pass a Header of their choice and escalate privileges which can completely compromise the cluster.

The affected product is vulnerable to improper input validation in the restore file. This enables an attacker to provide malicious config files to replace any file on disk.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges could make a crafted request to the Adobe Stock API to achieve remote code execution.

WordPress version <4.9 contains a CWE-20 Input Validation vulnerability in thumbnail processing that can result in remote code execution. This attack appears to be exploitable via thumbnail upload by an authenticated user and may require additional plugins in order to be exploited however this has not been confirmed at this time. This issue appears to have been partially, but not completely fixed in WordPress 4.9

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device with the privileges of the web server.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An authenticated attacker can trigger an insecure direct object reference in the `V1/customers/me` endpoint to achieve information exposure and privilege escalation.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges could upload a specially crafted file in the 'pub/media` directory could lead to remote code execution.

Dell EMC CloudLink 7.1 and all prior versions contain an Improper Input Validation Vulnerability. A remote low privileged attacker, may potentially exploit this vulnerability, leading to execution of arbitrary files on the server

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability while saving a customer's details with a specially crafted file. An authenticated attacker with admin privileges can leverage this vulnerability to achieve remote code execution.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability in the API File Option Upload Extension. An attacker with Admin privileges can achieve unrestricted file upload which can result in remote code execution.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges can upload a specially crafted file to bypass file extension restrictions and could lead to remote code execution.

A vulnerability was discovered in SPICE before 0.13.90 in the server's protocol handling. An authenticated attacker could send crafted messages to the SPICE server causing a heap overflow leading to a crash or possible code execution.

Hastymail 1.5 and earlier before 20061008 allows remote authenticated users to send arbitrary SMTP commands by placing them after a CRLF.CRLF sequence in the smtp_message parameter. NOTE: this crosses privilege boundaries if the SMTP server configuration prevents a user from establishing a direct SMTP session. NOTE: this is a different type of issue than CVE-2006-5262.

IBM Maximo Asset Management 7.1, 7.5, and 7.6 could allow a remote attacker to hijack a user's session, caused by the failure to invalidate an existing session identifier. An attacker could exploit this vulnerability to gain access to another user's session. IBM X-Force ID: 120253.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Commvault CommCell 11.22.22. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the DataProvider class. The issue results from the lack of proper validation of a user-supplied string before executing it as JavaScript code. An attacker can leverage this vulnerability to escape the JavaScript sandbox and execute Java code in the context of NETWORK SERVICE. Was ZDI-CAN-13755.

OSSP shiela 1.1.5 and earlier allows remote authenticated users to execute arbitrary commands on the CVS server via shell metacharacters in a filename that is committed.

MySQL before 5.0.25 and 5.1 before 5.1.12 evaluates arguments of suid routines in the security context of the routine's definer instead of the routine's caller, which allows remote authenticated users to gain privileges through a routine that has been made available using GRANT EXECUTE.

Improper input validation in the Intel(R) Data Center Manager Console before version 3.6.2 may allow an authenticated user to potentially enable escalation of privilege via network access.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to a failure to validate and sanitize input in Web Services Management Agent (WSMA) functions. An attacker could exploit this vulnerability by submitting a malicious payload to the affected device's web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

SolarWinds received a report of a vulnerability related to an input that was not sanitized in WebHelpDesk. SolarWinds has removed this input field to prevent the misuse of this input in the future.

ccca_ajaxhandler.php in Trend Micro Smart Protection Server 2.5 before build 2200, 2.6 before build 2106, and 3.0 before build 1330 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the (1) host or (2) apikey parameter in a register action, (3) enable parameter in a save_stting action, or (4) host or (5) apikey parameter in a test_connection action.

The vApp Managers web application in EMC Unisphere for VMAX Virtual Appliance 8.x before 8.3.0 and Solutions Enabler Virtual Appliance 8.x before 8.3.0 allows remote authenticated users to execute arbitrary code via crafted input to the (1) GeneralCmdRequest, (2) PersistantDataRequest, or (3) GetCommandExecRequest class.

Apache Struts 2.x before 2.3.29 allows remote attackers to execute arbitrary code via a "%{}" sequence in a tag attribute, aka forced double OGNL evaluation. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-0785.

Twigmo bundled with CS-Cart 4.3.9 and earlier and Twigmo bundled with CS-Cart Multi-Vendor 4.3.9 and earlier allow remote authenticated users to execute arbitrary PHP code on the servers.

Use of unsafe yaml load. Allows instantiation of arbitrary objects. The flaw itself is caused by an unsafe parsing of YAML values which happens whenever an action message is processed to be sent, and allows for the creation of Python objects. Through this flaw in the ROS core package of actionlib, an attacker with local or remote access can make the ROS Master, execute arbitrary code in Python form. Consider yaml.safe_load() instead. Located first in actionlib/tools/library.py:132. See links for more info on the bug.

The Grapevine update process in Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) 1.0 allows remote authenticated users to execute arbitrary commands as root via a crafted upgrade parameter, aka Bug ID CSCux15507.

In Indexhibit 2.1.5, remote attackers can execute arbitrary code via the v parameter (in conjunction with the id parameter) in a upd_jxcode=true action to the ndxzstudio/?a=system URI.

The TextParseUtil.translateVariables method in Apache Struts 2.x before 2.3.20 allows remote attackers to execute arbitrary code via a crafted OGNL expression with ANTLR tooling.

IBM Security Privileged Identity Manager Virtual Appliance 2.2.1 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 144580.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(2) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(2) allow remote authenticated users to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21889.

Cisco Prime Infrastructure 3.0 allows remote authenticated users to execute arbitrary code via a crafted HTTP request that is mishandled during viewing of a log file, aka Bug ID CSCuw81494.

The SPIP template composer/compiler in SPIP 3.1.2 and earlier allows remote authenticated users to execute arbitrary PHP code by uploading an HTML file with a crafted (1) INCLUDE or (2) INCLURE tag and then accessing it with a valider_xml action.