A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file. This issue leads to information disclosure of important configuration details from the OpenStack deployment.

A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file, leading to information disclosure of important configuration details from the OpenStack deployment.

A vulnerability where a WebExtension can run content scripts in disallowed contexts following navigation or other events. This allows for potential privilege escalation by the WebExtension on sites where content scripts should not be run. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.

redhat-certification does not properly restrict files that can be download through the /download page. A remote attacker may download any file accessible by the user running httpd.

setup before version 2.11.4-1.fc28 in Fedora and Red Hat Enterprise Linux added /sbin/nologin and /usr/sbin/nologin to /etc/shells. This violates security assumptions made by pam_shells and some daemons which allow access based on a user's shell being listed in /etc/shells. Under some circumstances, users which had their shell changed to /sbin/nologin could still access the system.

source-to-image component of Openshift Container Platform before versions atomic-openshift 3.7.53, atomic-openshift 3.9.31 is vulnerable to a privilege escalation which allows the assemble script to run as the root user in a non-privileged container. An attacker can use this flaw to open network connections, and possibly other actions, on the host which are normally only available to a root user.

Dell EMC iDRAC Service Module for all supported Linux and XenServer versions v3.0.1, v3.0.2, v3.1.0, v3.2.0, when started, changes the default file permission of the hosts file of the host operating system (/etc/hosts) to world writable. A malicious low privileged operating system user or process could modify the host file and potentially redirect traffic from the intended destination to sites hosting malicious or unwanted content.

A flaw was found in crun where containers were incorrectly started with non-empty default permissions. A vulnerability was found in Moby (Docker Engine) where containers were started incorrectly with non-empty inheritable Linux process capabilities. This flaw allows an attacker with access to programs with inheritable file capabilities to elevate those capabilities to the permitted set when execve(2) runs.

A flaw was found in buildah where containers were incorrectly started with non-empty default permissions. A bug was found in Moby (Docker Engine) where containers were incorrectly started with non-empty inheritable Linux process capabilities, enabling an attacker with access to programs with inheritable file capabilities to elevate those capabilities to the permitted set when execve(2) runs. This has the potential to impact confidentiality and integrity.

In Mercurial before 4.1.3, "hg serve --stdio" allows remote authenticated users to launch the Python debugger, and consequently execute arbitrary code, by using --debugger as a repository name.

A flaw was found in Podman, where containers were started incorrectly with non-empty default permissions. A vulnerability was found in Moby (Docker Engine), where containers were started incorrectly with non-empty inheritable Linux process capabilities. This flaw allows an attacker with access to programs with inheritable file capabilities to elevate those capabilities to the permitted set when execve(2) runs.

A flaw was found in cri-o, where containers were incorrectly started with non-empty default permissions. A vulnerability was found in Moby (Docker Engine) where containers started incorrectly with non-empty inheritable Linux process capabilities. This flaw allows an attacker with access to programs with inheritable file capabilities to elevate those capabilities to the permitted set when execve(2) runs.

An Incorrect Permission Assignment for Critical Resource flaw was found in Horizon on Red Hat OpenStack. Horizon session cookies are created without the HttpOnly flag despite HorizonSecureCookies being set to true in the environmental files, possibly leading to a loss of confidentiality and integrity.

A mechanism to bypass file system access protections in the sandbox using the file system request constructor through an IPC message. This allows for read and write access to the local file system. This vulnerability affects Firefox ESR < 52.1 and Firefox < 53.

Blink in Google Chrome prior to 61.0.3163.79 for Mac, Windows, and Linux, and 61.0.3163.81 for Android, failed to correctly propagate CSP restrictions to javascript scheme pages, which allowed a remote attacker to bypass content security policy via a crafted HTML page.

Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.12.3 and 1.10.6, Flatpak doesn't properly validate that the permissions displayed to the user for an app at install time match the actual permissions granted to the app at runtime, in the case that there's a null byte in the metadata file of an app. Therefore apps can grant themselves permissions without the consent of the user. Flatpak shows permissions to the user during install by reading them from the "xa.metadata" key in the commit metadata. This cannot contain a null terminator, because it is an untrusted GVariant. Flatpak compares these permissions to the *actual* metadata, from the "metadata" file to ensure it wasn't lied to. However, the actual metadata contents are loaded in several places where they are read as simple C-style strings. That means that, if the metadata file includes a null terminator, only the content of the file from *before* the terminator gets compared to xa.metadata. Thus, any permissions that appear in the metadata file after a null terminator are applied at runtime but not shown to the user. So maliciously crafted apps can give themselves hidden permissions. Users who have Flatpaks installed from untrusted sources are at risk in case the Flatpak has a maliciously crafted metadata file, either initially or in an update. This issue is patched in versions 1.12.3 and 1.10.6. As a workaround, users can manually check the permissions of installed apps by checking the metadata file or the xa.metadata key on the commit metadata.

A vulnerability was found in ipa before 4.4. IdM's ca-del, ca-disable, and ca-enable commands did not properly check the user's permissions while modifying CAs in Dogtag. An authenticated, unauthorized attacker could use this flaw to delete, disable, or enable CAs causing various denial of service problems with certificate issuance, OCSP signing, and deletion of secret keys.

A flaw was found in cluster-ingress-operator. A change to how the router-default service allows only certain IP source ranges could allow an attacker to access resources that would otherwise be restricted to specified IP ranges. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability..

A flaw was found in AMQ Broker Operator 7.9.4 installed via UI using OperatorHub where a low-privilege user that has access to the namespace where the AMQ Operator is deployed has access to clusterwide edit rights by checking the secrets. The service account used for building the Operator gives more permission than expected and an attacker could benefit from it. This requires at least an already compromised low-privilege account or insider attack.

An insecure modification vulnerability in the /etc/passwd file was found in all versions of OpenShift ServiceMesh (maistra) before 1.0.8 in the openshift/istio-kialia-rhel7-operator-container. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A vulnerability was found in all openshift/mediawiki 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the openshift/mediawiki. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

dovecot 1.0.7 in Red Hat Enterprise Linux (RHEL) 5, and possibly Fedora, uses world-readable permissions for dovecot.conf, which allows local users to obtain the ssl_key_password parameter value.

A flaw was found in Ansible Engine when a file is moved using atomic_move primitive as the file mode cannot be specified. This sets the destination files world-readable if the destination file does not exist and if the file exists, the file could be changed to have less restrictive permissions before the move. This could lead to the disclosure of sensitive data. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

An insecure modification vulnerability flaw was found in containers using nmstate/kubernetes-nmstate-handler. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges. Versions before kubernetes-nmstate-handler-container-v2.3.0-30 are affected.

A vulnerability was found in openshift/template-service-broker-operator in all 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the openshift/template-service-broker-operator. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

It has been found that in openshift-enterprise version 3.11 and openshift-enterprise versions 4.1 up to, including 4.3, multiple containers modify the permissions of /etc/passwd to make them modifiable by users other than root. An attacker with access to the running container can exploit this to modify /etc/passwd to add a user and escalate their privileges. This CVE is specific to the openshift/apb-tools-container.

An incorrect sysctls validation vulnerability was found in CRI-O 1.18 and earlier. The sysctls from the list of "safe" sysctls specified for the cluster will be applied to the host if an attacker is able to create a pod with a hostIPC and hostNetwork kernel namespace.

A flaw was found in all versions of Keycloak before 10.0.0, where the NodeJS adapter did not support the verify-token-audience. This flaw results in some users having access to sensitive information outside of their permissions.

Red Hat OpenShift Enterprise version 3.7 is vulnerable to access control override for container network filesystems. An attacker could override the UserId and GroupId for GlusterFS and NFS to read and write any data on the network filesystem.

An information-disclosure flaw was found in Grafana through 6.7.3. The database directory /var/lib/grafana and database file /var/lib/grafana/grafana.db are world readable. This can result in exposure of sensitive information (e.g., cleartext or encrypted datasource passwords).

The process_open function in sftp-server.c in OpenSSH before 7.6 does not properly prevent write operations in readonly mode, which allows attackers to create zero-length files.

It was found that system umask policy is not being honored when creating XDG user directories, since Xsession sources xdg-user-dirs.sh before setting umask policy. This only affects xdg-user-dirs before 0.15.5 as shipped with Red Hat Enterprise Linux.

tuned 2.10.0 creates its PID file with insecure permissions which allows local users to kill arbitrary processes.

ipmievd (aka the IPMI event daemon) in OpenIPMI, as used in the ipmitool package 1.8.11 in Red Hat Enterprise Linux (RHEL) 6, Debian GNU/Linux, Fedora 16, and other products uses 0666 permissions for its ipmievd.pid PID file, which allows local users to kill arbitrary processes by writing to this file.

An issue exists AccountService 0.6.37 in the user_change_password_authorized_cb() function in user.c which could let a local users obtain encrypted passwords.

It was found that rhnsd PID files are created as world-writable that allows local attackers to fill the disks or to kill selected processes.

It was found in EAP 7 before 7.0.9 that properties based files of the management and the application realm configuration that contain user to role mapping are world readable allowing access to users and roles information to all the users logged in to the system.

dracut.sh in dracut, as used in Red Hat Enterprise Linux 6, Fedora 16 and 17, and possibly other products, creates initramfs images with world-readable permissions, which might allow local users to obtain sensitive information.

The Replace function in the capp-lspp-config script in the (1) lspp-eal4-config-ibm and (2) capp-lspp-eal4-config-hp packages before 0.65-2 in Red Hat Enterprise Linux (RHEL) 5 uses lstat instead of stat to determine the /etc/pam.d/system-auth file permissions, leading to a change to world-writable permissions for the /etc/pam.d/system-auth-ac file, which allows local users to gain privileges by modifying this file.

A flaw was found in the coreos-installer, where it writes the Ignition config to the target system with world-readable access permissions. This flaw allows a local attacker to have read access to potentially sensitive data. The highest threat from this vulnerability is to confidentiality.

An incorrect default permissions vulnerability was found in the mig-controller. Due to an incorrect cluster namespaces handling an attacker may be able to migrate a malicious workload to the target cluster, impacting confidentiality, integrity, and availability of the services located on that cluster.

Apache Struts before 2.3.1.2 allows remote attackers to bypass security protections in the ParameterInterceptor class and execute arbitrary commands.

An exposure of sensitive information flaw was found in Ansible version 3.7.0. Sensitive information, such tokens and other secrets could be readable and exposed from the rsyslog configuration file, which has set the wrong world-readable permissions. The highest threat from this vulnerability is to confidentiality. This is fixed in Ansible version 3.7.1.

A vulnerability was found in all openshift/postgresql-apb 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the container openshift/postgresql-apb. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.4 could allow a local user to perform unauthorized actions due to insufficient permission settings. IBM X-Force ID: 244073.

A flaw was found in Red Hat Satellite, which allows a privileged attacker to read OMAPI secrets through the ISC DHCP of Smart-Proxy. This flaw allows an attacker to gain control of DHCP records from the network. The highest threat from this vulnerability is to system availability.

During installation of an OpenShift 4 cluster, the `openshift-install` command line tool creates an `auth` directory, with `kubeconfig` and `kubeadmin-password` files. Both files contain credentials used to authenticate to the OpenShift API server, and are incorrectly assigned word-readable permissions. ose-installer as shipped in Openshift 4.2 is vulnerable.

A flaw was found in ansible-runner where the default temporary files configuration in ansible-2.0.0 are written to world R/W locations. This flaw allows an attacker to pre-create the directory, resulting in reading private information or forcing ansible-runner to write files as the legitimate user in a place they did not expect. The highest threat from this vulnerability is to confidentiality and integrity.

A flaw was found in argocd. Any unprivileged user is able to deploy argocd in their namespace and with the created ServiceAccount argocd-argocd-server, the unprivileged user is able to read all resources of the cluster including all secrets which might enable privilege escalations. The highest threat from this vulnerability is to data confidentiality.

An information-disclosure flaw was found in the way that gluster-block before 0.5.1 logs the output from gluster-block CLI operations. This includes recording passwords to the cmd_history.log file which is world-readable. This flaw allows local users to obtain sensitive information by reading the log file. The highest threat from this vulnerability is to data confidentiality.