A flaw was found in Podman, where containers were started incorrectly with non-empty default permissions. A vulnerability was found in Moby (Docker Engine), where containers were started incorrectly with non-empty inheritable Linux process capabilities. This flaw allows an attacker with access to programs with inheritable file capabilities to elevate those capabilities to the permitted set when execve(2) runs.

Red Hat JBoss Fuse before 6.2.0 allows remote authenticated users to bypass intended restrictions and access the HawtIO console by leveraging an account defined in the users.properties file.

oVirt 3.2.2 through 3.5.0 does not invalidate the restapi session after logout from the webadmin, which allows remote authenticated users with knowledge of another user's session data to gain that user's privileges by replacing their session token with that of another user.

An out-of-bounds heap buffer access flaw was found in the way the iSCSI Block driver in QEMU versions 2.12.0 before 4.2.1 handled a response coming from an iSCSI server while checking the status of a Logical Address Block (LBA) in an iscsi_co_block_status() routine. A remote user could use this flaw to crash the QEMU process, resulting in a denial of service or potential execution of arbitrary code with privileges of the QEMU process on the host.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

The monitoring probe display in spacewalk-java before 2.1.148-1 and Red Hat Network (RHN) Satellite 4.0.0 through 4.2.0 and 5.1.0 through 5.3.0, and Proxy 5.3.0, allows remote authenticated users with permissions to administer monitoring probes to execute arbitrary code via unspecified vectors, related to backticks.

containerd is an open source container runtime. On installations using SELinux, such as EL8 (CentOS, RHEL), Fedora, or SUSE MicroOS, with containerd since v1.5.0-beta.0 as the backing container runtime interface (CRI), an unprivileged pod scheduled to the node may bind mount, via hostPath volume, any privileged, regular file on disk for complete read/write access (sans delete). Such is achieved by placing the in-container location of the hostPath volume mount at either `/etc/hosts`, `/etc/hostname`, or `/etc/resolv.conf`. These locations are being relabeled indiscriminately to match the container process-label which effectively elevates permissions for savvy containers that would not normally be able to access privileged host files. This issue has been resolved in version 1.5.9. Users are advised to upgrade as soon as possible.

A vulnerability was found in libpq, the default PostgreSQL client library where libpq failed to properly reset its internal state between connections. If an affected version of libpq was used with "host" or "hostaddr" connection parameters from untrusted input, attackers could bypass client-side connection security features, obtain access to higher privileged connections or potentially cause other impact through SQL injection, by causing the PQescape() functions to malfunction. Postgresql versions before 10.5, 9.6.10, 9.5.14, 9.4.19, and 9.3.24 are affected.

Samba 3.4 before 3.4.2, 3.3 before 3.3.8, 3.2 before 3.2.15, and 3.0.12 through 3.0.36, as used in the SMB subsystem in Apple Mac OS X 10.5.8 when Windows File Sharing is enabled, Fedora 11, and other operating systems, does not properly handle errors in resolving pathnames, which allows remote authenticated users to bypass intended sharing restrictions, and read, create, or modify files, in certain circumstances involving user accounts that lack home directories.

Interpretation conflict in drivers/md/dm-snap-persistent.c in the Linux kernel through 3.11.6 allows remote authenticated users to obtain sensitive information or modify data via a crafted mapping to a snapshot block device.

JMSAppender in Log4j 1.2 is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration. The attacker can provide TopicBindingName and TopicConnectionFactoryBindingName configurations causing JMSAppender to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-44228. Note this issue only affects Log4j 1.2 when specifically configured to use JMSAppender, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions.

Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the underlying string library can be used to corrupt the heap and potentially result with denial of service or remote code execution. The vulnerability involves changing the default proto-max-bulk-len configuration parameter to a very large value and constructing specially crafted network payloads or commands. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.

The create method in app/controllers/users_controller.rb in Foreman before 1.2.0-RC2 allows remote authenticated users with permissions to create or edit other users to gain privileges by (1) changing the admin flag or (2) assigning an arbitrary role.

Eval injection vulnerability in the create method in the Bookmarks controller in Foreman before 1.2.0-RC2 allows remote authenticated users with permissions to create bookmarks to execute arbitrary code via a controller name attribute.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to request data from internal resources that are not publicly available only by manipulating the processed input stream with a Java runtime version 14 to 8. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the [Security Framework](https://x-stream.github.io/security.html#framework), you will have to use at least version 1.4.18.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to request data from internal resources that are not publicly available only by manipulating the processed input stream with a Java runtime version 14 to 8. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the [Security Framework](https://x-stream.github.io/security.html#framework), you will have to use at least version 1.4.18.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

XStream is a simple library to serialize objects to XML and back again. In affected versions this vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream, if using the version out of the box with Java runtime version 14 to 8 or with JavaFX installed. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. XStream 1.4.18 uses no longer a blacklist by default, since it cannot be secured for general purpose.

A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata, resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the host.

Red Hat Enterprise Linux 4 does not properly compile and link gdm with tcp_wrappers on x86_64 platforms, which might allow remote attackers to bypass intended access restrictions.

Redis is an open source, in-memory database that persists on disk. An integer overflow bug affecting all versions of Redis can be exploited to corrupt the heap and potentially be used to leak arbitrary contents of the heap or trigger remote code execution. The vulnerability involves changing the default set-max-intset-entries configuration parameter to a very large value and constructing specially crafted commands to manipulate sets. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the set-max-intset-entries configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.

Redis is an in-memory database that persists on disk. A vulnerability involving out-of-bounds read and integer overflow to buffer overflow exists starting with version 2.2 and prior to versions 5.0.13, 6.0.15, and 6.2.5. On 32-bit systems, Redis `*BIT*` command are vulnerable to integer overflow that can potentially be exploited to corrupt the heap, leak arbitrary heap contents or trigger remote code execution. The vulnerability involves changing the default `proto-max-bulk-len` configuration parameter to a very large value and constructing specially crafted commands bit commands. This problem only affects Redis on 32-bit platforms, or compiled as a 32-bit binary. Redis versions 5.0.`3m 6.0.15, and 6.2.5 contain patches for this issue. An additional workaround to mitigate the problem without patching the `redis-server` executable is to prevent users from modifying the `proto-max-bulk-len` configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.

Jenkins before 1.583 and LTS before 1.565.3 allows remote authenticated users with the Job/CONFIGURE permission to bypass intended restrictions and create or destroy arbitrary jobs via unspecified vectors.

Redis is an open source, in-memory database that persists on disk. In affected versions an integer overflow bug in Redis can be exploited to corrupt the heap and potentially result with remote code execution. The vulnerability involves changing the default proto-max-bulk-len and client-query-buffer-limit configuration parameters to very large values and constructing specially crafted very large stream elements. The problem is fixed in Redis 6.2.6, 6.0.16 and 5.0.14. For users unable to upgrade an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.

Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the ziplist data structure used by all versions of Redis can be exploited to corrupt the heap and potentially result with remote code execution. The vulnerability involves modifying the default ziplist configuration parameters (hash-max-ziplist-entries, hash-max-ziplist-value, zset-max-ziplist-entries or zset-max-ziplist-value) to a very large value, and then constructing specially crafted commands to create very large ziplists. The problem is fixed in Redis versions 6.2.6, 6.0.16, 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the above configuration parameters. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.

Redis is an open source, in-memory database that persists on disk. In affected versions specially crafted Lua scripts executing in Redis can cause the heap-based Lua stack to be overflowed, due to incomplete checks for this condition. This can result with heap corruption and potentially remote code execution. This problem exists in all versions of Redis with Lua scripting support, starting from 2.6. The problem is fixed in versions 6.2.6, 6.0.16 and 5.0.14. For users unable to update an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands.

Redis is an open source (BSD licensed), in-memory data structure store, used as a database, cache, and message broker. An integer overflow bug in Redis version 6.0 or newer, could be exploited using the STRALGO LCS command to corrupt the heap and potentially result with remote code execution. This is a result of an incomplete fix by CVE-2021-29477. The problem is fixed in version 6.2.4 and 6.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to use ACL configuration to prevent clients from using the STRALGO LCS command. On 64 bit systems which have the fixes of CVE-2021-29477 (6.2.3 or 6.0.13), it is sufficient to make sure that the proto-max-bulk-len config parameter is smaller than 2GB (default is 512MB).

runc before 1.0.0-rc95 allows a Container Filesystem Breakout via Directory Traversal. To exploit the vulnerability, an attacker must be able to create multiple containers with a fairly specific mount configuration. The problem occurs via a symlink-exchange attack that relies on a race condition.

389 Directory Server 1.2.10 does not properly update the ACL when a DN entry is moved by a modrdn operation, which allows remote authenticated users with certain permissions to bypass ACL restrictions and access the DN entry.

Redis is an open source (BSD licensed), in-memory data structure store, used as a database, cache, and message broker. An integer overflow bug in Redis version 6.0 or newer could be exploited using the `STRALGO LCS` command to corrupt the heap and potentially result with remote code execution. The problem is fixed in version 6.2.3 and 6.0.13. An additional workaround to mitigate the problem without patching the redis-server executable is to use ACL configuration to prevent clients from using the `STRALGO LCS` command.

XStream is software for serializing Java objects to XML and back again. A vulnerability in XStream versions prior to 1.4.17 may allow a remote attacker has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types is affected. The vulnerability is patched in version 1.4.17.

Samba before versions 4.6.1, 4.5.7 and 4.4.11 are vulnerable to a malicious client using a symlink race to allow access to areas of the server file system not exported under the share definition.

In affected versions of WordPress, misuse of the `set-screen-option` filter's return value allows arbitrary user meta fields to be saved. It does require an admin to install a plugin that would misuse the filter. Once installed, it can be leveraged by low privileged users. This has been patched in version 5.4.2, along with all the previously affected versions via a minor release (5.3.4, 5.2.7, 5.1.6, 5.0.10, 4.9.15, 4.8.14, 4.7.18, 4.6.19, 4.5.22, 4.4.23, 4.3.24, 4.2.28, 4.1.31, 4.0.31, 3.9.32, 3.8.34, 3.7.34).

OpenStack Swift-on-File (aka Swiftonfile) does not properly restrict use of the pickle Python module when loading metadata, which allows remote authenticated users to execute arbitrary code via a crafted extended attribute (xattrs).

Adobe Flash Player version 27.0.0.159 and earlier has a flawed bytecode verification procedure, which allows for an untrusted value to be used in the calculation of an array index. This can lead to type confusion, and successful exploitation could lead to arbitrary code execution.

Puppet 2.6.x before 2.6.15 and 2.7.x before 2.7.13, and Puppet Enterprise (PE) Users 1.0, 1.1, 1.2.x, 2.0.x, and 2.5.x before 2.5.1 allows remote authenticated users with agent SSL keys and file-creation permissions on the puppet master to execute arbitrary commands by creating a file whose full pathname contains shell metacharacters, then performing a filebucket request.

This affects the package celery before 5.2.2. It by default trusts the messages and metadata stored in backends (result stores). When reading task metadata from the backend, the data is deserialized. Given that an attacker can gain access to, or somehow manipulate the metadata within a celery backend, they could trigger a stored command injection vulnerability and potentially gain further access to the system.

A use-after-free vulnerability exists in the way certain events are processed for ImageLoader objects of Webkit WebKitGTK 2.30.4. A specially crafted web page can lead to a potential information leak and further memory corruption. In order to trigger the vulnerability, a victim must be tricked into visiting a malicious webpage.

An issue was discovered in SaltStack Salt before 3003.3. A user who has control of the source, and source_hash URLs can gain full file system access as root on a salt minion.

puppet-tripleo before versions 5.5.0, 6.2.0 is vulnerable to an access-control flaw in the IPtables rules management, which allowed the creation of TCP/UDP rules with empty port values. If SSL is enabled, a malicious user could use these open ports to gain access to unauthorized resources.

In phpMyAdmin 4.x before 4.9.5 and 5.x before 5.0.2, a SQL injection vulnerability was found in retrieval of the current username (in libraries/classes/Server/Privileges.php and libraries/classes/UserPassword.php). A malicious user with access to the server could create a crafted username, and then trick the victim into performing specific actions with that user account (such as editing its privileges).