SchedMD Slurm before 18.08.9 and 19.x before 19.05.5 has weak slurmdbd.conf permissions.

A flaw was found in argocd. Any unprivileged user is able to deploy argocd in their namespace and with the created ServiceAccount argocd-argocd-server, the unprivileged user is able to read all resources of the cluster including all secrets which might enable privilege escalations. The highest threat from this vulnerability is to data confidentiality.

A flaw was found in the Linux Kernel before 5.8-rc6 in the ZRAM kernel module, where a user with a local account and the ability to read the /sys/class/zram-control/hot_add file can create ZRAM device nodes in the /dev/ directory. This read allocates kernel memory and is not accounted for a user that triggers the creation of that ZRAM device. With this vulnerability, continually reading the device may consume a large amount of system memory and cause the Out-of-Memory (OOM) killer to activate and terminate random userspace processes, possibly making the system inoperable.

An information-disclosure flaw was found in the way that gluster-block before 0.5.1 logs the output from gluster-block CLI operations. This includes recording passwords to the cmd_history.log file which is world-readable. This flaw allows local users to obtain sensitive information by reading the log file. The highest threat from this vulnerability is to data confidentiality.

An issue was discovered in Xen through 4.12.x allowing ARM guest OS users to cause a denial of service or gain privileges by leveraging the erroneous enabling of interrupts. Interrupts are unconditionally unmasked in exception handlers. When an exception occurs on an ARM system which is handled without changing processor level, some interrupts are unconditionally enabled during exception entry. So exceptions which occur when interrupts are masked will effectively unmask the interrupts. A malicious guest might contrive to arrange for critical Xen code to run with interrupts erroneously enabled. This could lead to data corruption, denial of service, or possibly even privilege escalation. However a precise attack technique has not been identified.

A flaw was found in Keycloak version 8.0.2 and 9.0.0, and was fixed in Keycloak version 9.0.1, where a malicious user registers as oneself. The attacker could then use the remove devices form to post different credential IDs and possibly remove MFA devices for other users.

A flaw was found in Red Hat Satellite's Job Invocation, where the "User Input" entry was not properly restricted to the view. This flaw allows a malicious Satellite user to scan through the Job Invocation, with the ability to search for passwords and other sensitive data. This flaw affects tfm-rubygem-foreman_ansible versions before 4.0.3.4.

From Eclipse OpenJ9 0.15 to 0.16, access to diagnostic operations such as causing a GC or creating a diagnostic file are permitted without any privilege checks.

A postinstall script in the dovecot rpm allows local users to read the contents of newly created SSL/TLS key files.

A flaw was found in APICast, when 3Scale's OIDC module does not properly evaluate the response to a mismatched token from a separate realm. This could allow a separate realm to be accessible to an attacker, permitting access to unauthorized information.

It was reported that watchman in openshift node-utils creates /var/run/watchman.pid and /var/log/watchman.ouput with world writable permission.

The m_authenticate function in modules/m_sasl.c in Charybdis before 3.5.3 allows remote attackers to spoof certificate fingerprints and consequently log in as another user via a crafted AUTHENTICATE parameter.

An authorization flaw was found in Pacemaker before 1.1.16, where it did not properly guard its IPC interface. An attacker with an unprivileged account on a Pacemaker node could use this flaw to, for example, force the Local Resource Manager daemon to execute a script as root and thereby gain root access on the machine.

A flaw was found in libvirt while it generates SELinux MCS category pairs for VMs' dynamic labels. This flaw allows one exploited guest to access files labeled for another guest, resulting in the breaking out of sVirt confinement. The highest threat from this vulnerability is to confidentiality and integrity.

Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.

An exploitable shared memory permissions vulnerability exists in the functionality of X11 Mesa 3D Graphics Library 19.1.2. An attacker can access the shared memory without any specific permissions to trigger this vulnerability.

In postgresql 9.3.x before 9.3.21, 9.4.x before 9.4.16, 9.5.x before 9.5.11, 9.6.x before 9.6.7 and 10.x before 10.2, pg_upgrade creates file in current working directory containing the output of `pg_dumpall -g` under umask which was in effect when the user invoked pg_upgrade, and not under 0077 which is normally used for other temporary files. This can allow an authenticated attacker to read or modify the one file, which may contain encrypted or unencrypted database passwords. The attack is infeasible if a directory mode blocks the attacker searching the current working directory or if the prevailing umask blocks the attacker opening the file.

An information-exposure vulnerability was discovered where openstack-mistral's undercloud log files containing clear-text information were made world readable. A malicious system user could exploit this flaw to access sensitive user information.

Debian-edu-config all versions < 2.11.10, a set of configuration files used for Debian Edu, and debian-lan-config < 0.26, configured too permissive ACLs for the Kerberos admin server, which allowed password changes for other Kerberos user principals.

It was discovered that the gnome-shell lock screen since version 3.15.91 did not properly restrict all contextual actions. An attacker with physical access to a locked workstation could invoke certain keyboard shortcuts, and potentially other actions.

A flaw was found in Ansible Tower, versions 3.6.x before 3.6.2, where files in '/var/backup/tower' are left world-readable. These files include both the SECRET_KEY and the database backup. Any user with access to the Tower server, and knowledge of when a backup is run, could retrieve every credential stored in Tower. Access to data is the highest threat with this vulnerability.

g810-led 0.4.2, a LED configuration tool for Logitech Gx10 keyboards, contained a udev rule to make supported device nodes world-readable and writable, allowing any process on the system to read traffic from keyboards, including sensitive data.

In Foreman it was discovered that the delete compute resource operation, when executed from the Foreman API, leads to the disclosure of the plaintext password or token for the affected compute resource. A malicious user with the "delete_compute_resource" permission can use this flaw to take control over compute resources managed by foreman. Versions before 1.20.3, 1.21.1, 1.22.0 are vulnerable.

A flaw was found in the 'deref' plugin of 389-ds-base where it could use the 'search' permission to display attribute values. In some configurations, this could allow an authenticated attacker to view private attributes, such as password hashes.

All Samba versions 4.x.x before 4.9.17, 4.10.x before 4.10.11 and 4.11.x before 4.11.3 have an issue, where the S4U (MS-SFU) Kerberos delegation model includes a feature allowing for a subset of clients to be opted out of constrained delegation in any way, either S4U2Self or regular Kerberos authentication, by forcing all tickets for these clients to be non-forwardable. In AD this is implemented by a user attribute delegation_not_allowed (aka not-delegated), which translates to disallow-forwardable. However the Samba AD DC does not do that for S4U2Self and does set the forwardable flag even if the impersonated client has the not-delegated flag set.

In systemd before v242-rc4, it was discovered that pam_systemd does not properly sanitize the environment before using the XDG_SEAT variable. It is possible for an attacker, in some particular configurations, to set a XDG_SEAT environment variable which allows for commands to be checked against polkit policies using the "allow_active" element rather than "allow_any".

It was found that the CloudForms before 5.6.2.2, and 5.7.0.7 did not properly apply permissions controls to VM IDs passed by users. A remote, authenticated attacker could use this flaw to execute arbitrary VMs on systems managed by CloudForms if they know the ID of the VM.

The mm subsystem in the Linux kernel through 3.2 does not properly enforce the CONFIG_STRICT_DEVMEM protection mechanism, which allows local users to read or write to kernel memory locations in the first megabyte (and bypass slab-allocation access restrictions) via an application that opens the /dev/mem file, related to arch/x86/mm/init.c and drivers/char/mem.c.

A permissions flaw was found in redis, which sets weak permissions on certain files and directories that could potentially contain sensitive information. A local, unprivileged user could possibly use this flaw to access unauthorized system information.

PackageKit 0.6.17 allows installation of unsigned RPM packages as though they were signed which may allow installation of non-trusted packages and execution of arbitrary code.

Drupal core 7.x versions before 7.57 when using Drupal's private file system, Drupal will check to make sure a user has access to a file before allowing the user to view or download it. This check fails under certain conditions in which one module is trying to grant access to the file and another is trying to deny it, leading to an access bypass vulnerability. This vulnerability is mitigated by the fact that it only occurs for unusual site configurations.

cfme-gemset versions 5.10.4.3 and below, 5.9.9.3 and below are vulnerable to a data leak, due to an improper authorization in the migration log controller. An attacker with access to an unprivileged user can access all VM migration logs available.

A flaw was found in tripleo-ansible version as shipped in Red Hat Openstack 16.1. The Ansible log file is readable to all users during stack update and creation. The highest threat from this vulnerability is to data confidentiality.

In Kubernetes v1.8.x-v1.14.x, schema info is cached by kubectl in the location specified by --cache-dir (defaulting to $HOME/.kube/http-cache), written with world-writeable permissions (rw-rw-rw-). If --cache-dir is specified and pointed at a different location accessible to other users/groups, the written files may be modified by other users/groups and disrupt the kubectl invocation.

The Debian courier-authlib package before 0.71.1-2 for Courier Authentication Library creates a /run/courier/authdaemon directory with weak permissions, allowing an attacker to read user information. This may include a cleartext password in some configurations. In general, it includes the user's existence, uid and gids, home and/or Maildir directory, quota, and some type of password information (such as a hash).

In Juju versions prior to 3.6.8 and 2.9.52, any authenticated controller user was allowed to upload arbitrary agent binaries to any model or to the controller itself, without verifying model membership or requiring explicit permissions. This enabled the distribution of poisoned binaries to new or upgraded machines, potentially resulting in remote code execution.

curl and libcurl before 7.50.1 do not check the client certificate when choosing the TLS connection to reuse, which might allow remote attackers to hijack the authentication of the connection by leveraging a previously created connection with a different client certificate.

A vulnerability was found in libvirt >= 4.1.0 in the virtlockd-admin.socket and virtlogd-admin.socket systemd units. A missing SocketMode configuration parameter allows any user on the host to connect using virtlockd-admin-sock or virtlogd-admin-sock and perform administrative tasks against the virtlockd and virtlogd daemons.

drbd8 allows local users to bypass intended restrictions for certain actions via netlink packets, similar to CVE-2009-3725.

The g_file_copy function in glib 2.0 sets the permissions of a target file to the permissions of a symbolic link (777), which allows user-assisted local users to modify files of other users, as demonstrated by using Nautilus to modify the permissions of the user home directory.

In the ebuild package through logcheck-1.3.23.ebuild for Logcheck on Gentoo, it is possible to achieve root privilege escalation from the logcheck user because of insecure recursive chown calls.

Lack of special casing of Android ashmem in Google Chrome prior to 65.0.3325.146 allowed a remote attacker who had compromised the renderer process to bypass inter-process read only guarantees via a crafted HTML page.

Insufficient policy enforcement in Blink in Google Chrome prior to 64.0.3282.119 allowed a remote attacker to potentially bypass content security policy via a crafted HTML page.

It was discovered that Canonical's Pebble service manager read-file API and the associated pebble pull command, before v1.10.2, allowed unprivileged local users to read files with root-equivalent permissions when Pebble was running as root. Fixes are also available as backports to v1.1.1, v1.4.2, and v1.7.4.

A code injection vulnerability in the Debian package component of Taegis Endpoint Agent (Linux) versions older than 1.3.10 allows local users arbitrary code execution as root. Redhat-based systems using RPM packages are not affected.

In snapd versions prior to 2.62, when using AppArmor for enforcement of sandbox permissions, snapd failed to restrict writes to the $HOME/bin path. In Ubuntu, when this path exists, it is automatically added to the users PATH. An attacker who could convince a user to install a malicious snap which used the 'home' plug could use this vulnerability to install arbitrary scripts into the users PATH which may then be run by the user outside of the expected snap sandbox and hence allow them to escape confinement.

A vulnerability was found in the device-mapper-multipath. The device-mapper-multipath allows local users to obtain root access, exploited alone or in conjunction with CVE-2022-41973. Local users that are able to write to UNIX domain sockets can bypass access controls and manipulate the multipath setup. This issue occurs because an attacker can repeat a keyword, which is mishandled when arithmetic ADD is used instead of bitwise OR. This could lead to local privilege escalation to root.

An information leak vulnerability exists in Gerrit versions prior to 2.14.22, 2.15.21, 2.16.25, 3.0.15, 3.1.10, 3.2.5 where an overoptimization with the FilteredRepository wrapper skips the verification of access on All-Users repositories, allowing an attacker to get read access to all users' personal information associated with their accounts.