In the Linux kernel before 5.7.8, fs/nfsd/vfs.c (in the NFS server) can set incorrect permissions on new filesystem objects when the filesystem lacks ACL support, aka CID-22cf8419f131. This occurs because the current umask is not considered.

Pen 0.18.0 has Insecure Temporary File Creation vulnerabilities

A flaw was found in the Ansible Engine when the fetch module is used. An attacker could intercept the module, inject a new path, and then choose a new destination path on the controller node. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

containerd is an industry-standard container runtime and is available as a daemon for Linux and Windows. In containerd before versions 1.3.9 and 1.4.3, the containerd-shim API is improperly exposed to host network containers. Access controls for the shim’s API socket verified that the connecting process had an effective UID of 0, but did not otherwise restrict access to the abstract Unix domain socket. This would allow malicious containers running in the same network namespace as the shim, with an effective UID of 0 but otherwise reduced privileges, to cause new processes to be run with elevated privileges. This vulnerability has been fixed in containerd 1.3.9 and 1.4.3. Users should update to these versions as soon as they are released. It should be noted that containers started with an old version of containerd-shim should be stopped and restarted, as running containers will continue to be vulnerable even after an upgrade. If you are not providing the ability for untrusted users to start containers in the same network namespace as the shim (typically the "host" network namespace, for example with docker run --net=host or hostNetwork: true in a Kubernetes pod) and run with an effective UID of 0, you are not vulnerable to this issue. If you are running containers with a vulnerable configuration, you can deny access to all abstract sockets with AppArmor by adding a line similar to deny unix addr=@**, to your policy. It is best practice to run containers with a reduced set of privileges, with a non-zero UID, and with isolated namespaces. The containerd maintainers strongly advise against sharing namespaces with the host. Reducing the set of isolation mechanisms used for a container necessarily increases that container's privilege, regardless of what container runtime is used for running that container.

An issue was discovered in LinuxTV xawtv before 3.107. The function dev_open() in v4l-conf.c does not perform sufficient checks to prevent an unprivileged caller of the program from opening unintended filesystem paths. This allows a local attacker with access to the v4l-conf setuid-root program to test for the existence of arbitrary files and to trigger an open on arbitrary files with mode O_RDWR. To achieve this, relative path components need to be added to the device path, as demonstrated by a v4l-conf -c /dev/../root/.bash_history command.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.0.9 to before 1.6.57, passing a pointer obtained from png_get_PLTE, png_get_tRNS, or png_get_hIST back into the corresponding setter on the same png_struct/png_info pair causes the setter to read from freed memory and copy its contents into the replacement buffer. The setter frees the internal buffer before copying from the caller-supplied pointer, which now dangles. The freed region may contain stale data (producing silently corrupted chunk metadata) or data from subsequent heap allocations (leaking unrelated heap contents into the chunk struct). This vulnerability is fixed in 1.6.57.

A WebExtension can request access to local files without the warning prompt stating that the extension will "Access your data for all websites" being displayed to the user. This allows extensions to run content scripts in local pages without permission warnings when a local file is opened. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.

In NetworkManager 0.9.2.0, when a new wireless network was created with WPA/WPA2 security in AdHoc mode, it created an open/insecure network.

Hardlink before 0.1.2 operates on full file system objects path names which can allow a local attacker to use this flaw to conduct symlink attacks.

A flaw was discovered in ibus in versions before 1.5.22 that allows any unprivileged user to monitor and send method calls to the ibus bus of another user due to a misconfiguration in the DBus server setup. A local attacker may use this flaw to intercept all keystrokes of a victim user who is using the graphical interface, change the input method engine, or modify other input related configurations of the victim user.

The default cloud-init configuration, in cloud-init 0.6.2 and newer, included "ssh_deletekeys: 0", disabling cloud-init's deletion of ssh host keys. In some environments, this could lead to instances created by cloning a golden master or template system, sharing ssh host keys, and being able to impersonate one another or conduct man-in-the-middle attacks.

dbus before 1.10.28, 1.12.x before 1.12.16, and 1.13.x before 1.13.12, as used in DBusServer in Canonical Upstart in Ubuntu 14.04 (and in some, less common, uses of dbus-daemon), allows cookie spoofing because of symlink mishandling in the reference implementation of DBUS_COOKIE_SHA1 in the libdbus library. (This only affects the DBUS_COOKIE_SHA1 authentication mechanism.) A malicious client with write access to its own home directory could manipulate a ~/.dbus-keyrings symlink to cause a DBusServer with a different uid to read and write in unintended locations. In the worst case, this could result in the DBusServer reusing a cookie that is known to the malicious client, and treating that cookie as evidence that a subsequent client connection came from an attacker-chosen uid, allowing authentication bypass.

A Incorrect Authorization vulnerability in chkstat of SUSE Linux Enterprise Server 12-SP5; openSUSE Leap 15.3, openSUSE Leap 15.4, openSUSE Leap Micro 5.2 did not consider group writable path components, allowing local attackers with access to a group what can write to a location included in the path to a privileged binary to influence path resolution. This issue affects: SUSE Linux Enterprise Server 12-SP5 permissions versions prior to 20170707. openSUSE Leap 15.3 permissions versions prior to 20200127. openSUSE Leap 15.4 permissions versions prior to 20201225. openSUSE Leap Micro 5.2 permissions versions prior to 20181225.

SPICE allows local guest OS users to read from or write to arbitrary host memory locations via crafted primary surface parameters, a similar issue to CVE-2015-5261.

Heap-based buffer overflow in SPICE before 0.12.6 allows guest OS users to read and write to arbitrary memory locations on the host via guest QXL commands related to surface creation.

The authentication setup in XWayland 1.16.x and 1.17.x before 1.17.2 starts the server in non-authenticating mode, which allows local users to read from or send information to arbitrary X11 clients via vectors involving a UNIX socket.

The audit_syscall_entry function in the Linux kernel 2.6.28.7 and earlier on the x86_64 platform does not properly handle (1) a 32-bit process making a 64-bit syscall or (2) a 64-bit process making a 32-bit syscall, which allows local users to bypass certain syscall audit configurations via crafted syscalls, a related issue to CVE-2009-0342 and CVE-2009-0343.

GNU Enscript 1.6.1 and earlier allows local users to overwrite arbitrary files of the Enscript user via a symlink attack on temporary files.

Vulnerability in exuberant-ctags before 3.2.4-0.1 insecurely creates temporary files.

It was found that cifs-utils' mount.cifs was invoking a shell when requesting the Samba password, which could be used to inject arbitrary commands. An attacker able to invoke mount.cifs with special permission, such as via sudo rules, could use this flaw to escalate their privileges.

A cron job in fcheck before 2.7.59 allows local users to overwrite arbitrary files via a symlink attack on a temporary file.

A memory leak flaw in the Linux kernel's hugetlbfs memory usage was found in the way the user maps some regions of memory twice using shmget() which are aligned to PUD alignment with the fault of some of the memory pages. A local user could use this flaw to get unauthorized access to some data.

For Eclipse Jetty versions <= 9.4.40, <= 10.0.2, <= 11.0.2, if an exception is thrown from the SessionListener#sessionDestroyed() method, then the session ID is not invalidated in the session ID manager. On deployments with clustered sessions and multiple contexts this can result in a session not being invalidated. This can result in an application used on a shared computer being left logged in.

In Archive_Tar before 1.4.14, symlinks can refer to targets outside of the extracted archive, a different vulnerability than CVE-2020-36193.

QEMU (aka Quick Emulator) built with the NE2000 device emulation support is vulnerable to an OOB r/w access issue. It could occur while performing 'ioport' r/w operations. A privileged (CAP_SYS_RAWIO) user/process could use this flaw to leak or corrupt QEMU memory bytes.

It was discovered that dpkg-deb does not properly sanitize directory permissions when extracting a control member into a temporary directory, which is documented as being a safe operation even on untrusted data. This may result in leaving temporary files behind on cleanup. Given automated and repeated execution of dpkg-deb commands on adversarial .deb packages or with well compressible files, placed inside a directory with permissions not allowing removal by a non-root user, this can end up in a DoS scenario due to causing disk quota exhaustion or disk full conditions.

SchedMD Slurm before 18.08.9 and 19.x before 19.05.5 has weak slurmdbd.conf permissions.

viewvc 1.0.3 allows improper access control to files in a repository when using the "forbidden" configuration option.

scan.c in x11vnc 0.9.16 uses IPC_CREAT|0777 in shmget calls, which allows access by actors other than the current user.

The td-agent-builder plugin before 2020-12-18 for Fluentd allows attackers to gain privileges because the bin directory is writable by a user account, but a file in bin is executed as NT AUTHORITY\SYSTEM.

debian/sympa.postinst for the Debian Sympa package before 6.2.40~dfsg-7 uses mode 4755 for sympa_newaliases-wrapper, whereas the intended permissions are mode 4750 (for access by the sympa group)

WebExtension content scripts can be loaded into about: pages in some circumstances, in violation of the permissions granted to extensions. This could allow an extension to interfere with the loading and usage of these pages and use capabilities that were intended to be restricted from extensions. This vulnerability affects Firefox < 64.

Service works could inappropriately gain access to cross origin audio in Media in Google Chrome prior to 71.0.3578.80 allowed a remote attacker to bypass same origin policy for audio content via a crafted HTML page.

Crossroads 2.81 does not properly handle the /tmp directory during a build of xr. A local attacker can first create a world-writable subdirectory in a certain location under the /tmp directory, wait until a user process copies xr there, and then replace the entire contents of this subdirectory to include a Trojan horse xr.

The TLS module within SaltStack Salt through 3002 creates certificates with weak file permissions.

In Ubuntu's trust-store, if a user revokes location access from an application, the location is still available to the application because the application will honour incorrect, cached permissions. This is because the cache was not ordered by creation time by the Select struct in src/core/trust/impl/sqlite3/store.cpp. Fixed in trust-store (Ubuntu) version 1.1.0+15.04.20150123-0ubuntu1 and trust-store (Ubuntu RTM) version 1.1.0+15.04.20150123~rtm-0ubuntu1.

Ubuntu's packaging of libvirt in 20.04 LTS created a control socket with world read and write permissions. An attacker could use this to overwrite arbitrary files or execute arbitrary code.

In JUnit4 from version 4.7 and before 4.13.1, the test rule TemporaryFolder contains a local information disclosure vulnerability. On Unix like systems, the system's temporary directory is shared between all users on that system. Because of this, when files and directories are written into this directory they are, by default, readable by other users on that same system. This vulnerability does not allow other users to overwrite the contents of these directories or files. This is purely an information disclosure vulnerability. This vulnerability impacts you if the JUnit tests write sensitive information, like API keys or passwords, into the temporary folder, and the JUnit tests execute in an environment where the OS has other untrusted users. Because certain JDK file system APIs were only added in JDK 1.7, this this fix is dependent upon the version of the JDK you are using. For Java 1.7 and higher users: this vulnerability is fixed in 4.13.1. For Java 1.6 and lower users: no patch is available, you must use the workaround below. If you are unable to patch, or are stuck running on Java 1.6, specifying the `java.io.tmpdir` system environment variable to a directory that is exclusively owned by the executing user will fix this vulnerability. For more information, including an example of vulnerable code, see the referenced GitHub Security Advisory.

It was found Ceph versions before 13.2.4 that authenticated ceph users with read only permissions could steal dm-crypt encryption keys used in ceph disk encryption.

Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, does not properly restrict API privileges during interaction with the Chrome Web Store, which has unspecified impact and attack vectors.

An issue was discovered in Xen through 4.12.x allowing ARM guest OS users to cause a denial of service or gain privileges by leveraging the erroneous enabling of interrupts. Interrupts are unconditionally unmasked in exception handlers. When an exception occurs on an ARM system which is handled without changing processor level, some interrupts are unconditionally enabled during exception entry. So exceptions which occur when interrupts are masked will effectively unmask the interrupts. A malicious guest might contrive to arrange for critical Xen code to run with interrupts erroneously enabled. This could lead to data corruption, denial of service, or possibly even privilege escalation. However a precise attack technique has not been identified.

openSUSE openbuildservice before 9.2.4 allowed authenticated users to delete packages on specific projects with project links.

An issue exists AccountService 0.6.37 in the user_change_password_authorized_cb() function in user.c which could let a local users obtain encrypted passwords.

Authorized users of the openbuildservice before 2.9.4 could delete packages by using a malicious request against projects having the OBS:InitializeDevelPackage attribute, a similar issue to CVE-2018-7689.

A vulnerability where a WebExtension can run content scripts in disallowed contexts following navigation or other events. This allows for potential privilege escalation by the WebExtension on sites where content scripts should not be run. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.

postgresql before versions 10.4, 9.6.9 is vulnerable in the adminpack extension, the pg_catalog.pg_logfile_rotate() function doesn't follow the same ACLs than pg_rorate_logfile. If the adminpack is added to a database, an attacker able to connect to it could exploit this to force log rotation.

In postgresql 9.3.x before 9.3.21, 9.4.x before 9.4.16, 9.5.x before 9.5.11, 9.6.x before 9.6.7 and 10.x before 10.2, pg_upgrade creates file in current working directory containing the output of `pg_dumpall -g` under umask which was in effect when the user invoked pg_upgrade, and not under 0077 which is normally used for other temporary files. This can allow an authenticated attacker to read or modify the one file, which may contain encrypted or unencrypted database passwords. The attack is infeasible if a directory mode blocks the attacker searching the current working directory or if the prevailing umask blocks the attacker opening the file.

In Flatpak before 0.8.7, a third-party app repository could include malicious apps that contain files with inappropriate permissions, for example setuid or world-writable. The files are deployed with those permissions, which would let a local attacker run the setuid executable or write to the world-writable location. In the case of the "system helper" component, files deployed as part of the app are owned by root, so in the worst case they could be setuid root.

Dropbear before 2017.75 might allow local users to read certain files as root, if the file has the authorized_keys file format with a command= option. This occurs because ~/.ssh/authorized_keys is read with root privileges and symlinks are followed.