gpsd versions 2.90 to 3.17 and microjson versions 1.0 to 1.3, an open source project, allow a stack-based buffer overflow, which may allow remote attackers to execute arbitrary code on embedded platforms via traffic on Port 2947/TCP or crafted JSON inputs.

An issue was discovered in Cypress (formerly Broadcom) WICED Studio 6.2 CYW20735B1 and CYW20819A1. As a Bluetooth Low Energy (BLE) packet is received, it is copied into a Heap (ThreadX Block) buffer. The buffer allocated in dhmulp_getRxBuffer is four bytes too small to hold the maximum of 255 bytes plus headers. It is possible to corrupt a pointer in the linked list holding the free buffers of the g_mm_BLEDeviceToHostPool Block pool. This pointer can be fully controlled by overflowing with 3 bytes of packet data and the first byte of the packet CRC checksum. The checksum can be freely chosen by adapting the packet data accordingly. An attacker might be able to allocate the overwritten address as a receive buffer resulting in a write-what-where condition. This is fixed in BT SDK2.4 and BT SDK2.45.

The ThreadX-based firmware on Marvell Avastar Wi-Fi devices, models 88W8787, 88W8797, 88W8801, 88W8897, and 88W8997, allows remote attackers to execute arbitrary code or cause a denial of service (block pool overflow) via malformed Wi-Fi packets during identification of available Wi-Fi networks. Exploitation of the Wi-Fi device can lead to exploitation of the host application processor in some cases, but this depends on several factors including host OS hardening and the availability of DMA.

Memory corruption issues in Intel(R) WIFI Drivers before version 21.40 may allow a privileged user to potentially enable escalation of privilege, denial of service, and information disclosure via adjacent access.

Heap overflow in subsystem in Intel(R) CSME before versions 11.8.70, 11.11.70, 11.22.70, 12.0.45; Intel(R) TXE before versions 3.1.70 and 4.0.20 may allow an unauthenticated user to potentially enable escalation of privileges, information disclosure or denial of service via adjacent access.

In sdp_copy_raw_data of sdp_discovery.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution over bluetooth with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9.0 Android ID: A-110216176

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects GS728TPPv2 before 6.0.0.48, GS728TPv2 before 6.0.0.48, GS750E before 1.0.1.4, GS752TPP before 6.0.0.48, and GS752TPv2 before 6.0.0.48.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.75, D6000 before 1.0.0.75, D6200 before 1.1.00.32, D7000 before 1.0.1.68, DM200 before 1.0.0.58, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, WNR2020 before 1.1.0.62, and XR500 before 2.3.2.32.

Improper check while accessing the local memory stack on MQTT connection request can lead to buffer overflow in snapdragon wear in versions MDM9206, MDM9607

ASUS RT-AC56U’s configuration function has a heap-based buffer overflow vulnerability due to insufficient validation for the decryption parameter length, which allows an unauthenticated LAN attacker to execute arbitrary code, perform arbitrary operations and disrupt service.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6020 before 1.0.0.30, R6080 before 1.0.0.30, R6120 before 1.0.0.36, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24. R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6020 before 1.0.0.30, R6080 before 1.0.0.30, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6020 before 1.1.00.26, R6080 before 1.1.00.26; R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects EX6150v2 before 1.0.1.54, R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000 before 1.0.9.10, R7000P before 1.2.0.22, R6900P before 1.2.0.22, R7100LG before 1.0.0.32, R7300DST before 1.0.0.54, R7900 before 1.0.1.18, R8000 before 1.0.3.48, R8300 before 1.0.2.106, R8500 before 1.0.2.106, R6100 before 1.0.1.16, WNDR4300v2 before 1.0.0.48, WNDR4500v3 before 1.0.0.48, and WNR2000v5 before 1.0.0.58.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.28, R6100 before 1.0.1.16, R7500 before 1.0.0.112, R7500v2 before 1.0.3.20, R7800 before 1.0.2.36, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.88, WNDR4300 before 1.0.2.90, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

A stack-based buffer overflow vulnerability exists in the confsrv addTimeGroup functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to a buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

In process_service_search_attr_req of sdp_server.cc, there is an out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-68817966.

A stack-based buffer overflow vulnerability exists in the confsrv ucloud_set_node_location functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to stack-based buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.

In process_service_attr_req of sdp_server.c, there is an out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-68776054.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Canon imageCLASS MF644Cdw 10.02 printers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the SLP protocol. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15845.

Sonos Era 300 Out-of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected Sonos Era 300 speakers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of HLS playlist data. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the anacapa user. Was ZDI-CAN-25606.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6020 before 1.0.0.30, R6080 before 1.0.0.30, R6120 before 1.0.0.36, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Canon imageCLASS MF644Cdw 10.02 printers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the privet API. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15834.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Canon imageCLASS MF644Cdw 10.02 printers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CADM service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15802.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of file name extensions. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13910.

A stack-based buffer overflow vulnerability exists in the confsrv set_mf_rule functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to stack-based buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability leverages the ethAddr field within the protobuf message to cause a buffer overflow.

A stack-based buffer overflow vulnerability exists in the confsrv set_mf_rule functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to stack-based buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability leverages the name field within the protobuf message to cause a buffer overflow.

Buffer overflow in usb device class. Zephyr versions >= v2.6.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fm6v-8625-99jf

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6260 before 1.1.0.76, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, and AC2600 before 1.2.0.62.

D-Link DAP-1325 SetAPLanSettings Gateway Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18826.

D-Link DAP-1325 SetAPLanSettings IPAddr Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18827.

Actiontec WCB6200Q uh_get_postdata_withupload Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21418.

Wyze Cam v3 TCP Traffic Handling Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Wyze Cam v3 IP cameras. Authentication is not required to exploit this vulnerability. The specific flaw exists within the TUTK P2P library. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22419.

Actiontec WCB6200Q Multipart Boundary Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21416.