LCDS Laquis SCADA prior to version 4.1.0.4150 allows the opening of a specially crafted report format file that may cause an out of bounds read, which may cause a system crash, allow data exfiltration, or remote code execution.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length heap buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length stack buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

WPLSoft in Delta Electronics versions 2.45.0 and prior writes data from a file outside the bounds of the intended buffer space, which could cause memory corruption or may allow remote code execution.

CX-Supervisor (Versions 3.42 and prior) can execute code that has been injected into a project file. An attacker could exploit this to execute code under the privileges of the application.

Several use after free vulnerabilities have been identified in CX-Supervisor (Versions 3.42 and prior). When processing project files, the application fails to check if it is referencing freed memory. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

LAquis SCADA Versions 4.1.0.3870 and prior has a path traversal vulnerability, which may allow remote code execution.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows an attacker using a specially crafted project file to supply a pointer for a controlled memory address, which may allow remote code execution, data exfiltration, or cause a system crash.

NetComm Wireless G LTE Light Industrial M2M Router (NWL-25) with firmware 2.0.29.11 and prior. A cross-site request forgery condition can occur, allowing an attacker to change passwords of the device remotely.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows improper control of generation of code when opening a specially crafted project file, which may allow remote code execution, data exfiltration, or cause a system crash.

In ABB IP GATEWAY 3.39 and prior, the web server does not sufficiently verify that a request was performed by the authenticated user, which may allow an attacker to launch a request impersonating that user.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows taking in user input without proper sanitation, which may allow an attacker to execute remote code on the server.

In GE PACSystems RX3i CPE305/310 version 9.20 and prior, RX3i CPE330 version 9.21 and prior, RX3i CPE 400 version 9.30 and prior, PACSystems RSTi-EP CPE 100 all versions, and PACSystems CPU320/CRU320 RXi all versions, the device does not properly validate input, which could allow a remote attacker to send specially crafted packets causing the device to become unavailable.

Kernel drivers in Beckhoff TwinCAT 3.1 Build 4022.4, TwinCAT 2.11 R3 2259, and TwinCAT 3.1 lack proper validation of user-supplied pointer values. An attacker who is able to execute code on the target may be able to exploit this vulnerability to obtain SYSTEM privileges.

When CX-Supervisor (Versions 3.42 and prior) processes project files and tampers with the value of an offset, an attacker can force the application to read a value outside of an array.

Drager Infinity Delta, Infinity Delta, all versions, Delta XL, all versions, Kappa, all version, and Infinity Explorer C700, all versions. A malformed network packet may cause the monitor to reboot. By repeatedly sending the malformed network packet, an attacker may be able to disrupt patient monitoring by causing the monitor to repeatedly reboot until it falls back to default configuration and loses network connectivity.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows out of bounds read when opening a specially crafted project file, which may allow data exfiltration.

LAquis SCADA Versions 4.1.0.3870 and prior has several out-of-bounds read vulnerabilities, which may allow remote code execution.

CNCSoft Version 1.00.83 and prior with ScreenEditor Version 1.00.54 has two out-of-bounds read vulnerabilities could cause the software to crash due to lacking user input validation for processing project files. Which may allow an attacker to gain remote code execution with administrator privileges if exploited.

LCDS LAquis SCADA Versions 4.3.1 and prior. The affected product is vulnerable to arbitrary file creation by unauthorized users

Delta Industrial Automation CNCSoft, CNCSoft ScreenEditor Version 1.00.84 and prior. An out-of-bounds read vulnerability may cause the software to crash due to lacking user input validation for processing project files.

Moxa IKS and EDS fails to properly check array bounds which may allow an attacker to read device memory on arbitrary addresses, and may allow an attacker to retrieve sensitive data or cause device reboot.

Cscape, 9.80 SP4 and prior. An improper input validation vulnerability may be exploited by processing specially crafted POC files. This may allow an attacker to read confidential information and remotely execute arbitrary code.

The TextEditor 2.0 in ABB CP400 Panel Builder versions 2.0.7.05 and earlier contain a vulnerability in the file parser of the Text Editor wherein the application doesn't properly prevent the insertion of specially crafted files which could allow arbitrary code execution.

In Roundcube from versions 1.2.0 to 1.3.5, with the archive plugin enabled and configured, it's possible to exploit the unsanitized, user-controlled "_uid" parameter (in an archive.php _task=mail&_mbox=INBOX&_action=plugin.move2archive request) to perform an MX (IMAP) injection attack by placing an IMAP command after a %0d%0a sequence. NOTE: this is less easily exploitable in 1.3.4 and later because of a Same Origin Policy protection mechanism.

In ImageMagick 7.0.7-24 Q16, there is a heap-based buffer over-read in IsWEBPImageLossless in coders/webp.c.

The export function in libavfilter/vf_signature.c in FFmpeg through 3.4.2 allows remote attackers to cause a denial of service (out-of-array access) or possibly have unspecified other impact via a long filename.

The ReadTIFFImage function in coders/tiff.c in ImageMagick 7.0.7-26 Q16 does not properly restrict memory allocation, leading to a heap-based buffer over-read.

A Remote Code Execution vulnerability exists in .NET software when the software fails to check the source markup of a file, aka ".NET Framework Remote Code Execution Vulnerability." This affects .NET Framework 4.7.2, Microsoft .NET Framework 4.7.2.

There is a heap-based buffer over-read in the getName function of util/decompile.c in libming 0.4.8 for CONSTANT16 data. A crafted input will lead to a denial of service or possibly unspecified other impact.

A remote code execution vulnerability exists in Microsoft PowerPoint software when the software fails to properly validate XML content, aka "Microsoft PowerPoint Remote Code Execution Vulnerability." This affects Microsoft Office.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Foxit Reader 9.0.1.1049. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the XFA execEvent method of Button elements. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code under the context of the current process. Was ZDI-CAN-5580.

A remote code execution vulnerability exists when Skype for Business and Microsoft Lync clients fail to properly sanitize specially crafted content, aka "Remote Code Execution Vulnerability in Skype For Business and Lync." This affects Skype, Microsoft Lync.

An issue was discovered in FreeXL before 1.0.5. There is a heap-based buffer over-read in the freexl::destroy_cell function.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Foxit Reader 8.3.2.25013. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the addField method. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code under the context of the current process. Was ZDI-CAN-5312.

The function ParseVP9SuperFrameIndex in common/libwebm_util.cc in libwebm through 2018-01-30 does not validate the child_frame_length data obtained from a .webm file, which allows remote attackers to cause an information leak or a denial of service (heap-based buffer over-read and later out-of-bounds write), or possibly have unspecified other impact.

Heap-based buffer overflow in the zip_read_mac_metadata function in archive_read_support_format_zip.c in libarchive before 3.2.0 allows remote attackers to execute arbitrary code via crafted entry-size values in a ZIP archive.

An issue was discovered in FreeXL before 1.0.5. There is a heap-based buffer over-read in the function read_mini_biff_next_record.

Captive Network Assistant in Apple OS X before 10.11.5 mishandles a custom URL scheme, which allows user-assisted remote attackers to execute arbitrary code via unspecified vectors.

mpv through 0.28.0 allows remote attackers to execute arbitrary code via a crafted web site, because it reads HTML documents containing VIDEO elements, and accepts arbitrary URLs in a src attribute without a protocol whitelist in player/lua/ytdl_hook.lua. For example, an av://lavfi:ladspa=file= URL signifies that the product should call dlopen on a shared object file located at an arbitrary local pathname. The issue exists because the product does not consider that youtube-dl can provide a potentially unsafe URL.

The extractTree function in unADF allows remote attackers to execute arbitrary code via shell metacharacters in a directory name in an adf file.

Insufficient policy enforcement in Blink in Google Chrome prior to 68.0.3440.75 allowed a remote attacker to bypass same origin policy via a crafted HTML page.

An integer overflow in Skia in Google Chrome prior to 65.0.3325.146 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.

An iterator-invalidation bug in PDFium in Google Chrome prior to 66.0.3359.117 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted PDF file.

Insufficient data validation in External Protocol Handler in Google Chrome prior to 64.0.3282.119 allowed a remote attacker to potentially execute arbitrary programs on user machine via a crafted HTML page.

In ImageMagick 7.0.7-17 Q16, there is a heap-based buffer over-read in coders/sixel.c in the ReadSIXELImage function, related to the sixel_decode function.

Insufficient validation of an image filter in Skia in Google Chrome prior to 67.0.3396.62 allowed a remote attacker who had compromised the renderer process to perform an out of bounds memory read via a crafted HTML page.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Foxit Reader before 9.1 and PhantomPDF before 9.1. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the processing of specially crafted pdf files with embedded u3d images. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process, a different vulnerability than CVE-2018-5677 and CVE-2018-5679.

The outputSWF_TEXT_RECORD function (util/outputscript.c) in libming through 0.4.8 is vulnerable to an integer overflow and resultant out-of-bounds read, which may allow attackers to cause a denial of service or unspecified other impact via a crafted SWF file.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Foxit Reader before 9.1 and PhantomPDF before 9.1. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the processing of specially crafted pdf files with embedded u3d images. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process, a different vulnerability than CVE-2018-5679 and CVE-2018-5680.