ABB Panel Builder 800 all versions has an improper input validation vulnerability which may allow an attacker to insert and run arbitrary code on a computer where the affected product is used.

A vulnerability in Base Software for SoftControl allows an attacker to insert and run arbitrary code in a computer running the affected product. This issue affects: .

Cscape, 9.80 SP4 and prior. An improper input validation vulnerability may be exploited by processing specially crafted POC files. This may allow an attacker to read confidential information and remotely execute arbitrary code.

Processing specially crafted .pm3 files in Advantech WebAccess HMI Designer 2.1.7.32 and prior may cause the system to write outside the intended buffer area and may allow remote code execution.

Double free vulnerabilities in Advantech WebAccess HMI Designer 2.1.7.32 and prior caused by processing specially crafted .pm3 files may allow remote code execution.

Heap-based buffer overflow vulnerabilities in Advantech WebAccess HMI Designer 2.1.7.32 and prior caused by processing specially crafted .pm3 files may allow remote code execution.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length heap buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length stack buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

WPLSoft in Delta Electronics versions 2.45.0 and prior writes data from a file outside the bounds of the intended buffer space, which could cause memory corruption or may allow remote code execution.

CX-Supervisor (Versions 3.42 and prior) can execute code that has been injected into a project file. An attacker could exploit this to execute code under the privileges of the application.

A type confusion vulnerability exists when processing project files in CX-Supervisor (Versions 3.42 and prior). An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

Several use after free vulnerabilities have been identified in CX-Supervisor (Versions 3.42 and prior). When processing project files, the application fails to check if it is referencing freed memory. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

NetComm Wireless G LTE Light Industrial M2M Router (NWL-25) with firmware 2.0.29.11 and prior. A cross-site request forgery condition can occur, allowing an attacker to change passwords of the device remotely.

In ABB IP GATEWAY 3.39 and prior, the web server does not sufficiently verify that a request was performed by the authenticated user, which may allow an attacker to launch a request impersonating that user.

The installations for ABB System 800xA Information Manager versions 5.1, 6.0 to 6.0.3.2 and 6.1 wrongly contain an auxiliary component. An attacker is able to use this for an XSS-like attack to an authenticated local user, which might lead to execution of arbitrary code.

Advantech WebAccess 8.1 and earlier contains a DLL hijacking vulnerability which may allow an attacker to run a malicious DLL file within the search path resulting in execution of arbitrary code.

A vulnerability in ABB ARG600 Wireless Gateway series that could allow an attacker to exploit the vulnerability by remotely connecting to the serial port gateway, and/or protocol converter, depending on the configuration.

Cross-site request forgery has been identified in Moxa IKS and EDS, which may allow for the execution of unauthorized actions on the device.

A memory corruption vulnerability has been identified in WECON LeviStudioU version 1.8.56 and prior, which may allow arbitrary code execution. Mat Powell, Ziad Badawi, and Natnael Samson working with Trend Micro's Zero Day Initiative, reported these vulnerabilities to NCCIC.

Multiple stack-based buffer overflow vulnerabilities in WECON LeviStudioU version 1.8.56 and prior may be exploited when parsing strings within project files. The process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage these vulnerabilities to execute code under the context of the current process. Mat Powell, Ziad Badawi, and Natnael Samson working with Trend Micro's Zero Day Initiative, reported these vulnerabilities to NCCIC.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows taking in user input without proper sanitation, which may allow an attacker to execute remote code on the server.

In GE PACSystems RX3i CPE305/310 version 9.20 and prior, RX3i CPE330 version 9.21 and prior, RX3i CPE 400 version 9.30 and prior, PACSystems RSTi-EP CPE 100 all versions, and PACSystems CPU320/CRU320 RXi all versions, the device does not properly validate input, which could allow a remote attacker to send specially crafted packets causing the device to become unavailable.

Kernel drivers in Beckhoff TwinCAT 3.1 Build 4022.4, TwinCAT 2.11 R3 2259, and TwinCAT 3.1 lack proper validation of user-supplied pointer values. An attacker who is able to execute code on the target may be able to exploit this vulnerability to obtain SYSTEM privileges.

Drager Infinity Delta, Infinity Delta, all versions, Delta XL, all versions, Kappa, all version, and Infinity Explorer C700, all versions. A malformed network packet may cause the monitor to reboot. By repeatedly sending the malformed network packet, an attacker may be able to disrupt patient monitoring by causing the monitor to repeatedly reboot until it falls back to default configuration and loses network connectivity.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows execution of script code by opening a specially crafted report format file. This may allow remote code execution, data exfiltration, or cause a system crash.

Improper Input Validation vulnerability in the ABB SPIET800 and PNI800 module allows an attacker to cause the denial of service or make the module unresponsive.

Improper Input Validation vulnerability in ABB 800xA, Control Software for AC 800M, Control Builder Safe, Compact Product Suite - Control and I/O, ABB Base Software for SoftControl allows an attacker to cause the denial of service.

Improper Input Validation vulnerability in the ABB SPIET800 and PNI800 module allows an attacker to cause the denial of service or make the module unresponsive.

For the Central Licensing Server component used in ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, ABB AbilityTM SCADAvantage versions 5.1 to 5.6.5, a weakness in validation of input exists that allows an attacker to block license handling by sending specially crafted messages to the CLS web service.

For the Central Licensing Server component used in ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, ABB AbilityTM SCADAvantage versions 5.1 to 5.6.5, a weakness in validation of input exists that allows an attacker to alter licenses assigned to the system nodes by sending specially crafted messages to the CLS web service.

A S+ Operations and S+ Historian service is subject to a DoS by special crafted messages. An attacker might use this flaw to make it crash or even execute arbitrary code on the machine where the service is hosted.

Due to a lack of file length check, the HMIStudio component of ABB PB610 Panel Builder 600 versions 2.8.0.424 and earlier crashes when trying to load an empty *.JPR application file. An attacker with access to the file system might be able to cause application malfunction such as denial of service.

The HMISimulator component of ABB PB610 Panel Builder 600 versions 2.8.0.424 and earlier fails to validate the content-length field for HTTP requests, exposing HMISimulator to denial of service via crafted HTTP requests manipulating the content-length setting.

Google V8, as used in Google Chrome before 15.0.874.102, allows remote attackers to cause a denial of service or possibly have unspecified other impact via crafted JavaScript code that triggers out-of-bounds write operations.

Google Chrome before 14.0.835.163 does not properly perform garbage collection during the processing of PDF documents, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document.

Open redirect vulnerability in IBM Records Manager (RM) 4.5.x before 4.5.1.1-IER-FP001 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors.

Etherpad 1.5.x and 1.6.x before 1.6.4 allows an attacker to execute arbitrary code on the server. The instance has to be configured to use a document database (DirtyDB, CouchDB, MongoDB, or RethinkDB).

AppleMobileFileIntegrity in Apple iOS before 10 and OS X before 10.12 mishandles process entitlement and Team ID values in the task port inheritance policy, which allows attackers to execute arbitrary code in a privileged context via a crafted app.

foomatic-rip-hplip in HP Linux Imaging and Printing (HPLIP) 3.11.5 allows remote attackers to execute arbitrary code via a crafted *FoomaticRIPCommandLine field in a .ppd file.

In Roundcube from versions 1.2.0 to 1.3.5, with the archive plugin enabled and configured, it's possible to exploit the unsanitized, user-controlled "_uid" parameter (in an archive.php _task=mail&_mbox=INBOX&_action=plugin.move2archive request) to perform an MX (IMAP) injection attack by placing an IMAP command after a %0d%0a sequence. NOTE: this is less easily exploitable in 1.3.4 and later because of a Same Origin Policy protection mechanism.

IOGraphics in Apple OS X before 10.11.4 allows attackers to execute arbitrary code in a privileged context or cause a denial of service (memory corruption) via a crafted app, a different vulnerability than CVE-2016-1747.

The MediaTek video driver in Android before 2016-10-05 allows attackers to gain privileges via a crafted application, aka Android internal bug 30019037 and MediaTek internal bug ALPS02829568.

On Samsung mobile devices with L(5.x), M(6.0), and N(7.x) software, Gallery allows remote attackers to execute arbitrary code via a BMP file with a crafted resolution, aka SVE-2017-11105.

The STARTTLS implementation in the server in Ipswitch IMail 11.03 and earlier does not properly restrict I/O buffering, which allows man-in-the-middle attackers to insert commands into encrypted SMTP sessions by sending a cleartext command that is processed after TLS is in place, related to a "plaintext command injection" attack, a similar issue to CVE-2011-0411.

A Remote Code Execution vulnerability exists in .NET software when the software fails to check the source markup of a file, aka ".NET Framework Remote Code Execution Vulnerability." This affects .NET Framework 4.7.2, Microsoft .NET Framework 4.7.2.

lwp-download in libwww-perl before 5.835 does not reject downloads to filenames that begin with a . (dot) character, which allows remote servers to create or overwrite files via (1) a 3xx redirect to a URL with a crafted filename or (2) a Content-Disposition header that suggests a crafted filename, and possibly execute arbitrary code as a consequence of writing to a dotfile in a home directory.

GNU Wget 1.12 and earlier uses a server-provided filename instead of the original URL to determine the destination filename of a download, which allows remote servers to create or overwrite arbitrary files via a 3xx redirect to a URL with a .wgetrc filename followed by a 3xx redirect to a URL with a crafted filename, and possibly execute arbitrary code as a consequence of writing to a dotfile in a home directory.

ImageIO in Apple Mac OS X 10.5.8 and 10.6.x before 10.6.5 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted PSD image.

Google Chrome before 12.0.742.91 does not properly implement the framework for extensions, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that lead to a "stale pointer."

Google Chrome before 11.0.696.57 does not properly handle drop-down lists, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that lead to a "stale pointer."