A vulnerability classified as critical has been found in TOTOLINK X15 up to 1.0.0-B20230714.1105. Affected is an unknown function of the file /boafrm/formParentControl of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The Spotify app 8.9.58 for iOS has a buffer overflow in its use of strcat.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the mitInterface parameter in ip/goform/RouteStatic

An unauthenticated attacker can send a specially crafted unauthenticated HTTP request to the device that can overflow a buffer. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.29. The overflowed data leads to segmentation fault and ultimately a denial-of-service condition, causing the device to reboot. The impact of this vulnerability is that an unauthenticated attacker could leverage this flaw to cause the target device to become unresponsive. An attacker could automate this attack to achieve persistent DoS, effectively rendering the target controller useless.

Buffer Overflow vulnerability in host-host NEUQ_board v.1.0 allows a remote attacker to cause a denial of service via the password.h component.

Rhonabwy before v1.1.5 was discovered to contain a buffer overflow via the component r_jwe_aesgcm_key_unwrap. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted JWE token.

A vulnerability classified as critical has been found in Tenda TX3 16.03.13.11_multi. This affects an unknown part of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-1960 firmware DIR-1960_A1_1.11 was discovered to contain a buffer overflow via srtcat in prog.cgi. This vulnerability allowed attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

Multiple buffer overflow vulnerabilities in the openSchedWifi function of Tenda AC6 v.15.03.06.50 allows attackers to cause a Denial of Service (DoS) via injecting a crafted payload into the schedStartTime and schedEndTime parameters.

Tenda AC6 V2.0 15.03.06.50 was discovered to contain a buffer overflow in the speed_dir parameter in the SetSpeedWan function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Multiple buffer overflows in the AdvSetMacMtuWan function of Tenda AC6 v.15.03.06.50 allows attackers to cause a Denial of Service (DoS) via injecting a crafted payload into the wanMTU, wanSpeed, cloneType, mac, serviceName, serverName, wanMTU2, wanSpeed2, cloneType2, mac2, serviceName2, and serverName2 parameters.

Vapor is a server-side Swift HTTP web framework. When using automatic content decoding an attacker can craft a request body that can make the server crash with the following request: `curl -d "array[_0][0][array][_0][0][array]$(for f in $(seq 1100); do echo -n '[_0][0][array]'; done)[string][_0]=hello%20world" http://localhost:8080/foo`. The issue is unbounded, attacker controlled stack growth which will at some point lead to a stack overflow and a process crash. This issue has been fixed in version 4.61.1.

A vulnerability has been found in Tenda TX3 16.03.13.11_multi and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow vulnerability in the AT command interface of Gigaset DX600A v41.00-175 devices allows remote attackers to force a device reboot by sending relatively long AT commands.

Tenda TX9 Pro V22.03.02.10 is vulnerable to Buffer Overflow via the functtion setIPv6Status() in httpd module.

A weakness has been identified in Shiguangwu sgwbox N3 2.0.25. Affected by this vulnerability is an unknown functionality of the file /usr/sbin/http_eshell_server of the component WIREDCFGGET Interface. Executing manipulation of the argument params can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

GOST engine is a reference implementation of the Russian GOST crypto algorithms for OpenSSL. TLS clients using GOST engine when ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is agreed and the server uses 512 bit GOST secret keys are vulnerable to buffer overflow. GOST engine version 3.0.1 contains a patch for this issue. Disabling ciphersuite `TLS_GOSTR341112_256_WITH_KUZNYECHIK_CTR_OMAC` is a possible workaround.

A Stack Buffer Overflow vulnerability in zziplibv 0.13.77 allows attackers to cause a denial of service via the __zzip_fetch_disk_trailer() function at /zzip/zip.c.

libsmb2 6.2+ is vulnerable to Buffer Overflow. When processing SMB2 chained PDUs (NextCommand), libsmb2 repeatedly calls smb2_add_iovector() to append to a fixed-size iovec array without checking the upper bound of v->niov (SMB2_MAX_VECTORS=256). An attacker can craft responses with many chained PDUs to overflow v->niov and perform heap out-of-bounds writes, causing memory corruption, crashes, and potentially arbitrary code execution. The SMB2_OPLOCK_BREAK path bypasses message ID validation.

engine.c in slaacd in OpenBSD 6.9 and 7.0 before 2022-02-21 has a buffer overflow triggerable by an IPv6 router advertisement with more than seven nameservers. NOTE: privilege separation and pledge can prevent exploitation.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromSetSysTime function via the ntpServer parameter.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the saveParentControlInfo function via the deviceName parameter.

MariaDB Server v10.7 and below was discovered to contain a global buffer overflow in the component decimal_bin_size, which is exploited via specially crafted SQL statements.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.

TOTOLINK AC1200 Wireless Dual Band Gigabit Router firmware A3100R V4.1.2cu.5247_B20211129, in the cgi function `setNoticeCfg` of the file `/lib/cste_modules/system.so`, the length of the user input string `NoticeUrl` is not checked. This can lead to a buffer overflow, allowing attackers to construct malicious HTTP or MQTT requests to cause a denial-of-service attack.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability has been found in TP-Link TL-WR841N v11, TL-WR842ND v2 and TL-WR494N v3. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the GET parameter XNo of incoming HTTP requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_APC.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

PJSIP is a free and open source multimedia communication library written in C. A buffer overflow vulnerability in versions 2.12 and prior affects applications that use PJSIP DNS resolution. It doesn't affect PJSIP users who utilize an external resolver. This vulnerability is related to CVE-2023-27585. The difference is that this issue is in parsing the query record `parse_rr()`, while the issue in CVE-2023-27585 is in `parse_query()`. A patch is available in the `master` branch of the `pjsip/pjproject` GitHub repository. A workaround is to disable DNS resolution in PJSIP config (by setting `nameserver_count` to zero) or use an external resolver instead.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

FlyFish v3.0.0 was discovered to contain a buffer overflow via the password parameter on the login page. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

wasm3 v0.5.0 was discovered to contain a global buffer overflow which leads to segmentation fault via the function "PreserveRegisterIfOccupied" in wasm3/source/m3_compile.c.

libmodbus v3.1.10 is vulnerable to Buffer Overflow via the modbus_write_bits function. This issue can be triggered when the function is fed with specially crafted input, which leads to out-of-bounds read and can potentially cause a crash or other unintended behaviors.

Triangle Microworks TMW IEC 61850 Client source code libraries before 12.2.0 lack a buffer size check when processing received messages. The resulting buffer overflow can cause a crash, resulting in a denial of service.

An issue in D-Link DI-8003 16.07.26A1 related to improper handling of the id parameter in the /saveparm_usb.asp endpoint.

An issue was discovered in WinAPRS 2.9.0. A buffer overflow in DIGI address processing for VHF KISS packets allows a remote attacker to cause a denial of service (daemon crash) via a malicious AX.25 packet over the air. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the name and mem parameters in the /time_group.asp endpoint.

IOWOW is a C utility library and persistent key/value storage engine. Versions 1.4.15 and prior contain a stack buffer overflow vulnerability that allows for Denial of Service (DOS) when it parses scientific notation numbers present in JSON. A patch for this issue is available at commit a79d31e4cff1d5a08f665574b29fd885897a28fd in the `master` branch of the repository. There are no workarounds other than applying the patch.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of multiple parameters in the /web_post.asp endpoint. An attacker can exploit this vulnerability by sending a crafted HTTP GET request in parameters such as name, en, user_id, log, and time.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1, specifically in the handling of the wans parameter in the qos.asp endpoint.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_00476598 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_base_set_5g in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

Buffer Overflow vulnerability in SILA Embedded Solutions GmbH freemodbus v.2018-09-12 allows a remtoe attacker to cause a denial of service via the LINUXTCP server component.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_00475e1c function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wds_key_wep in the payload, which can cause the program to crash and potentially lead to a Denial of Service (DoS) attack.

Tenda AC6 v15.03.05.16_multi is vulnerable to Buffer Overflow in the formSetQosBand function via the list parameter.

A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/UserCongratulationsExec. The manipulation of the argument getuid leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A flaw in Apache libapreq2 versions 2.16 and earlier could cause a buffer overflow while processing multipart form uploads. A remote attacker could send a request causing a process crash which could lead to a denial of service attack.