Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to obtain sensitive credential information by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00302012.
Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.
Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.
Syska Smart Bulb devices through 2017-08-06 receive RGB parameters over cleartext Bluetooth Low Energy (BLE), leading to sniffing, reverse engineering, and replay attacks.
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R8300 before 1.0.2.106 and R8500 before 1.0.2.106.
Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects DST6501 before 1.1.0.6 and WNR2000v2 before 1.2.0.8.
Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.
Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.94.
Juniper Networks ScreenOS devices do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is often detected as CVE-2003-0001. The issue affects all versions of Juniper Networks ScreenOS prior to 6.3.0r25.
An issue was discovered in WiZ Colors A60 1.14.0. The device sends unnecessary information to the cloud controller server. Although this information is sent encrypted and has low risk in isolation, it decreases the privacy of the end user. The information sent includes the local IP address being used and the SSID of the Wi-Fi network the device is connected to. (Various resources such as wigle.net can be use for mapping of SSIDs to physical locations.)
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices makes it easy for remote attackers to determine the hidden SSID and passphrase for a Home Security Wi-Fi network.
A vulnerability classified as problematic was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected by this vulnerability is the function sub_41E304 of the file /H5/state_view.data of the component HTTP Endpoint. The manipulation leads to information disclosure. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used.
The Track My Mobile feature in the SamsungDive subsystem for Android on Samsung Galaxy devices shows the activation of remote tracking, which might allow physically proximate attackers to defeat a product-recovery effort by tampering with this feature or its location data.
A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-68818034.
A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-67058064.
The DNAv4 protocol implementation in the DHCP component in Apple iOS before 6 sends Wi-Fi packets containing a MAC address of a host on a previously used network, which might allow remote attackers to obtain sensitive information about previous device locations by sniffing an unencrypted Wi-Fi network for these packets.
Symantec Messaging Gateway (SMG) before 10.0 allows remote attackers to obtain potentially sensitive information about component versions via unspecified vectors.
The D-Link DCS-932L camera with firmware 1.02 allows remote attackers to discover the password via a UDP broadcast packet, as demonstrated by running the D-Link Setup Wizard and reading the _paramR["P"] value.
QIS_wizard.htm on the ASUS RT-N56U router with firmware before 1.0.1.4o allows remote attackers to obtain the administrator password via a flag=detect request.
A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.0 SP2). The affected software has an information disclosure vulnerability that could allow an attacker to retrieve a list of network devices a known user can manage.
A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.0 SP2). The affected software has an information disclosure vulnerability that could allow an attacker to retrieve VPN connection for a known user.
All versions of the SDP server in BlueZ 5.46 and earlier are vulnerable to an information disclosure vulnerability which allows remote attackers to obtain sensitive information from the bluetoothd process memory. This vulnerability lies in the processing of SDP search attribute requests.
A vulnerability in the packet processing code of Cisco IOS Software for Cisco Aironet Access Points could allow an unauthenticated, adjacent attacker to retrieve content from memory on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks that are performed by the affected device when the device adds padding to egress packets. An attacker could exploit this vulnerability by sending a crafted IP packet to an affected device. A successful exploit could allow the attacker to retrieve content from memory on the affected device, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvc21581.
A information disclosure vulnerability in the Broadcom wi-fi driver. Product: Android. Versions: Android kernel. Android ID: A-37305578. References: B-V2017052301.
A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0. Android ID: A-63145701.
Centreon before 19.10.7 exposes Session IDs in server responses.
SONY SNC-CH115, SNC-CH120, SNC-CH160, SNC-CH220, SNC-CH260, SNC-DH120, SNC-DH120T, SNC-DH160, SNC-DH220, SNC-DH220T, SNC-DH260, SNC-EB520, SNC-EM520, SNC-EM521, SNC-ZB550, SNC-ZM550, SNC-ZM551, SNC-EP550, SNC-EP580, SNC-ER550, SNC-ER550C, SNC-ER580, SNC-ER585, SNC-ER585H, SNC-ZP550, SNC-ZR550, SNC-EP520, SNC-EP521, SNC-ER520, SNC-ER521, SNC-ER521C network cameras with firmware before Ver.1.86.00 and SONY SNC-CX600, SNC-CX600W, SNC-EB600, SNC-EB600B, SNC-EB602R, SNC-EB630, SNC-EB630B, SNC-EB632R, SNC-EM600, SNC-EM601, SNC-EM602R, SNC-EM602RC, SNC-EM630, SNC-EM631, SNC-EM632R, SNC-EM632RC, SNC-VB600, SNC-VB600B, SNC-VB600B5, SNC-VB630, SNC-VB6305, SNC-VB6307, SNC-VB632D, SNC-VB635, SNC-VM600, SNC-VM600B, SNC-VM600B5, SNC-VM601, SNC-VM601B, SNC-VM602R, SNC-VM630, SNC-VM6305, SNC-VM6307, SNC-VM631, SNC-VM632R, SNC-WR600, SNC-WR602, SNC-WR602C, SNC-WR630, SNC-WR632, SNC-WR632C, SNC-XM631, SNC-XM632, SNC-XM636, SNC-XM637, SNC-VB600L, SNC-VM600L, SNC-XM631L, SNC-WR602CL network cameras with firmware before Ver.2.7.2 are prone to sensitive information disclosure. This may allow an attacker on the same local network segment to login to the device with administrative privileges and perform operations on the device.
Unauthenticated access to the cloud-based service maintained by TrackR Bravo is allowed for querying or sending GPS data for any Trackr device by using the tracker ID number which can be discovered as described in CVE-2016-6539. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541.
On Fitbit activity-tracker devices, certain addresses never change. According to the popets-2019-0036.pdf document, this leads to "permanent trackability" and "considerable privacy concerns" without a user-accessible anonymization feature. The devices, such as Charge 2, transmit Bluetooth Low Energy (BLE) advertising packets with a TxAdd flag indicating random addresses, but the addresses remain constant. If devices come within BLE range at one or more locations where an adversary has set up passive sniffing, the adversary can determine whether the same device has entered one of these locations.
A vulnerability in the Cisco Connected Mobile Experiences (CMX) software could allow an unauthenticated, adjacent attacker to access sensitive data on an affected device. The vulnerability is due to a lack of input and validation checking mechanisms for certain GET requests to API's on an affected device. An attacker could exploit this vulnerability by sending HTTP GET requests to an affected device. An exploit could allow the attacker to use this information to conduct additional reconnaissance attacks.
The Trackr device ID is constructed of a manufacturer identifier of four zeroes followed by the BLE MAC address in reverse. The MAC address can be obtained by being in close proximity to the Bluetooth device, effectively exposing the device ID. The ID can be used to track devices. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541.
The TrackR Bravo mobile app stores the account password used to authenticate to the cloud API in cleartext in the cache.db file. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541.
The image build process for the overcloud images in Red Hat OpenStack Platform 8.0 (Liberty) director and Red Hat Enterprise Linux OpenStack Platform 7.0 (Kilo) director (aka overcloud-full) use a default root password of ROOTPW, which allows attackers to gain access via unspecified vectors.
Certain Logitech Unifying devices allow attackers to dump AES keys and addresses, leading to the capability of live decryption of Radio Frequency transmissions, as demonstrated by an attack against a Logitech K360 keyboard.
The WPS implementation on I-O DATA DEVICE WN-GDN/R3, WN-GDN/R3-C, WN-GDN/R3-S, and WN-GDN/R3-U devices does not limit PIN guesses, which allows remote attackers to obtain network access via a brute-force attack.
Padding bytes in Ethernet packets on PA-200, PA-220, PA-500, PA-800, PA-2000 Series, PA-3000 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series firewalls are not cleared before the data frame is created. This leaks a small amount of random information from the firewall memory into the Ethernet packets. An attacker on the same Ethernet subnet as the PAN-OS firewall is able to collect potentially sensitive information from these packets. This issue is also known as Etherleak and is detected by security scanners as CVE-2003-0001. This issue impacts: PAN-OS 8.1 version earlier than PAN-OS 8.1.18; PAN-OS 9.0 versions earlier than PAN-OS 9.0.12; PAN-OS 9.1 versions earlier than PAN-OS 9.1.5.
A vulnerability was found in IROAD Dash Cam FX2 up to 20250308. It has been classified as problematic. Affected is an unknown function of the file /mnt/extsd/event/ of the component HTTP/RTSP. The manipulation leads to information disclosure. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used.
ASUS Japan WL-330NUL devices with firmware before 3.0.0.42 allow remote attackers to discover the WPA2-PSK passphrase via unspecified vectors.
A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0. Android ID: A-63146698.
In Vecna VGo Robot versions prior to 3.0.3.52164, an attacker may be able to capture firmware updates through the adjacent network.
All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by information exposure vulnerability, which may allow an unauthenticated attacker to get the GPON SN information via appviahttp service.
Huawei B315s-22 products with software of 21.318.01.00.26 have an information leak vulnerability. Unauthenticated adjacent attackers may exploit this vulnerability to obtain device information.
AirScan in Apple OS X before 10.11 allows man-in-the-middle attackers to obtain eSCL packet payload data via unspecified vectors.
IDE Xcode Server in Apple Xcode before 7.0 does not ensure that server traffic is encrypted, which allows remote attackers to obtain sensitive information by sniffing the network.
Samsung SBeam allows remote attackers to read arbitrary images by leveraging an NFC connection to access the HTTP server on port 15000.
The Netlogon service in Microsoft Windows Server 2003 SP2 and R2 SP2, Windows Server 2008 SP2 and R2 SP1, and Windows Server 2012 Gold and R2 does not properly implement domain-controller communication, which allows remote attackers to discover credentials by leveraging certain PDC access and spoofing the BDC role in a PDC communication channel, aka "Elevation of Privilege Vulnerability in Netlogon."
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects D7000 before 1.0.1.52, D7800 before 1.0.1.31, D8500 before 1.0.3.36, JNR1010v2 before 1.1.0.46, JR6150 before 1.0.1.14, JWNR2010v5 before 1.1.0.46, PR2000 before 1.0.0.20, R6050 before 1.0.1.14, R6220 before 1.1.0.60, R6400 before 1.1.0.26, R6400v2 before 1.0.2.46, R6700v2 before 1.2.0.2, R6800 before 1.2.0.2, R6900v2 before 1.2.0.2, R7300DST before 1.0.0.56, R7500 before 1.0.0.112, R7500v2 before 1.0.3.24, R7800 before 1.0.2.36, R7900P before 1.1.4.6, R8000P before 1.1.4.6, R8300 before 1.0.2.104, R8500 before 1.0.2.104, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.94, WNDR3700v5 before 1.1.0.50, WNDR4300 before 1.0.2.96, WNDR4300v2 before 1.0.0.52, WNDR4500v3 before 1.0.0.52, WNR1000v4 before 1.1.0.46, WNR2020 before 1.1.0.46, and WNR2050 before 1.1.0.46.
A vulnerability was found in Linksys WRT54GL 4.30.18. It has been declared as problematic. This vulnerability affects unknown code of the file /SysInfo1.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253330 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Linksys WRT54GL 4.30.18 and classified as problematic. Affected by this issue is some unknown functionality of the file /SysInfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-253328. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.