The Symantec Messaging Gateway product prior to 10.6.6 may be susceptible to an authentication bypass exploit, which is a type of issue that can allow attackers to potentially circumvent security mechanisms currently in place and gain access to the system or network.

Dell EMC ScaleIO versions prior to 2.5, contain improper restriction of excessive authentication attempts on the Light installation Agent (LIA). This component is deployed on every server in the ScaleIO cluster and is used for central management of ScaleIO nodes. A remote malicious user, having network access to LIA, could potentially exploit this vulnerability to launch brute force guessing of user names and passwords of user accounts on the LIA.

An issue was discovered on Canon LBP6650, LBP3370, LBP3460, and LBP7750C devices. It is possible to bypass the Administrator Mode authentication for /tlogin.cgi via vectors involving frame.cgi?page=DevStatus. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

On TP-Link TL-WR841N v13 00000001 0.9.1 4.16 v0001.0 Build 171019 Rel.55346n devices, all actions in the web interface are affected by bypass of authentication via an HTTP request.

A vulnerability was found in Apeman ID71 218.53.203.117. The impacted element is an unknown function of the file /onvif/device_service of the component ONVIF Service. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote attacker can bypass the System Manager Mode on the Canon MF210 and MF220 web interface without knowing the PIN for /login.html via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

A remote attacker can bypass the Management Mode on the Canon LBP7110Cw web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

A weak Cookie parameter is used in the web application of Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior. An attacker can brute force parameters required to bypass authentication and access the web interface to use all its functions except for password change.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

Jitsi Meet is an open source video conferencing application. In versions prior to 2.0.5963, a Prosody module allows the use of symmetrical algorithms to validate JSON web tokens. This means that tokens generated by arbitrary sources can be used to gain authorization to protected rooms. This issue is fixed in Jitsi Meet 2.0.5963. There are no known workarounds aside from updating.

IBM Spectrum Copy Data Management 2.2.13 and earlier has weak authentication and password rules and incorrectly handles default credentials for the Spectrum Copy Data Management Admin console. IBM X-Force ID: 214957.

A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password value to an affected portal when prompted to enter an administrative password for the portal. A successful exploit could allow the attacker to bypass authentication and gain administrator privileges for the web-based service portal of the affected software. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg29809.

An improper authentication vulnerability has been reported to affect Android App Qfile. If exploited, this vulnerability allows attackers to compromise app and access information We have already fixed this vulnerability in the following versions of Qfile: Qfile 3.0.0.1105 and later

A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with network access to the SiPass integrated server to bypass the authentication mechanism and perform administrative operations.

The National Payments Corporation of India BHIM application 1.3 for Android does not properly restrict use of the OTP feature, which makes it easier for attackers to bypass authentication.

INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0670.

An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.

The National Payments Corporation of India BHIM application 1.3 for Android uses a custom keypad for which the input element is available to the Accessibility service, which makes it easier for attackers to bypass authentication.

An issue was discovered in SMA Solar Technology products. An attacker can use Sunny Explorer or the SMAdata2+ network protocol to update the device firmware without ever having to authenticate. If an attacker is able to create a custom firmware version that is accepted by the inverter, the inverter is compromised completely. This allows the attacker to do nearly anything: for example, giving access to the local OS, creating a botnet, using the inverters as a stepping stone into companies, etc. NOTE: the vendor reports that this attack has always been blocked by "a final integrity and compatibility check." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

A vulnerability in the Guest Portal login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Guest Portal login page. An exploit could allow the attacker to perform brute-force password attacks on the ISE Guest Portal. Cisco Bug IDs: CSCve98518.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP.

Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.

An Authentication Bypass by Capture-Replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.

An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string.

NetIQ iManager before 3.0.3 delivered a SSL private key in a Java application (JAR file) for authentication to Sentinel, allowing attackers to extract and establish their own connections to the Sentinel appliance.

In EMC Avamar Server Software 7.3.1-125, 7.3.0-233, 7.3.0-226, 7.2.1-32, 7.2.1-31, 7.2.0-401, an unauthenticated remote attacker may potentially bypass the authentication process to gain access to the system maintenance page. This may be exploited by an attacker to view sensitive information, perform software updates, or run maintenance workflows.

In Apache NiFi before 0.7.2 and 1.x before 1.1.2 in a cluster environment, if an anonymous user request is replicated to another node, the originating node identity is used rather than the "anonymous" user.

It was noticed that a malicious process impersonating an Impala daemon in Apache Impala (incubating) 2.7.0 to 2.8.0 could cause Impala daemons to skip authentication checks when Kerberos is enabled (but TLS is not). If the malicious server responds with 'COMPLETE' before the SASL handshake has completed, the client will consider the handshake as completed even though no exchange of credentials has happened.

The doFilter method in UrlAccessController in HPE Intelligent Management Center (iMC) PLAT 7.2 E0403P06 allows remote bypass of authentication via unspecified strings in a URI.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

Zoho ManageEngine ADSelfService Plus version 6103 and prior allows CAPTCHA bypass due to improper parameter validation.

Free PHP VX Guestbook 1.06 allows remote attackers to bypass authentication and download a backup of the database via a direct request to admin/backupdb.php.

WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.

SapporoWorks BlackJumboDog (BJD) before 4.2.3 allows remote attackers to bypass authentication and obtain sensitive information via unspecified vectors.

EMC Isilon InsightIQ 4.1.0, 4.0.1, 4.0.0, 3.2.2, 3.2.1, 3.2.0, 3.1.1, 3.1.0, 3.0.1, 3.0.0 is affected by an authentication bypass vulnerability that could potentially be exploited by attackers to compromise the affected system.

VCM5010 with software versions earlier before V100R002C50SPC100 has an authentication bypass vulnerability. This is due to improper implementation of authentication for accessing web pages. An unauthenticated attacker could bypass the authentication by sending a crafted HTTP request. 5010 with software versions earlier before V100R002C50SPC100 has an arbitrary file upload vulnerability. The software does not validate the files that uploaded. An authenticated attacker could upload arbitrary files to the system.

A vulnerability was found in otale Tale Blog 2.0.5. It has been classified as problematic. This affects an unknown part of the file /%61dmin/api/logs. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308. Affected by this issue is some unknown functionality of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Shiguangwu sgwbox N3 2.0.25. The affected element is an unknown function of the file /fsnotify of the component POST Message Handler. The manipulation of the argument token leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

HTTP File Server (HFS) before 2.2c allows remote attackers to obtain configuration and usage details by using an id element such as <id>%version%</id> in HTTP Basic Authentication instead of a username and password, as demonstrated by placing this id element in the userinfo subcomponent of a URL.

A weakness has been identified in haxxorsid Stock-Management-System up to fbbbf213e9c93b87183a3891f77e3cc7095f22b0. This affects an unknown function of the file /api/employees. Executing manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been made available to the public and could be exploited. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer.

ganglia-web before 3.7.1 allows remote attackers to bypass authentication.