An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. The application's configuration file contains parameters that represent passwords in cleartext.

Nortek Linear eMerge 50P/5000P devices have Default Credentials.

Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.

Linear eMerge E3-Series devices have Cleartext Credentials in a Database.

An issue was discovered in portier vision 4.4.4.2 and 4.4.4.6. Passwords are stored using reversible encryption rather than as a hash value, and the used Vigenere algorithm is badly outdated. Moreover, the encryption key is static and too short. Due to this, the passwords stored by the application can be easily decrypted.

IBM Cognos Analytics 11.0 and 11.1 could allow a remote attacker to obtain credentials from a user's browser via incorrect autocomplete settings in New Data Server Connection page. IBM X-Force ID: 172129.

Advantech WebAccess 8.3.4 does not properly restrict an RPC call that allows unauthenticated, remote users to read files. An attacker can use this vulnerability to recover the administrator password.

IBM Rational ClearCase 1.0.0.0 GIT connector does not sufficiently protect the document database password. An attacker could obtain the password and gain unauthorized access to the document database. IBM X-Force ID: 156583.

Fuji Electric V-Server before 6.0.33.0 stores database credentials in project files as plaintext. An attacker that can gain access to the project file can recover the database credentials and gain access to the database server.

IBM Cognos Analytics 11.0 and 11.1 could allow a remote attacker to obtain credentials from a user's browser via incorrect autocomplete settings in New Content Backup page. IBM X-Force ID: 172130.

An issue was discovered on Humax Wireless Voice Gateway HGB10R-2 20160817_1855 devices. Admin credentials are sent over cleartext HTTP.

In IXP EasyInstall 6.2.13723, there are cleartext credentials in network communication on TCP port 20050 when using the Administrator console remotely.

Rundeck is an open source automation service with a web console, command line tools and a WebAPI. The Key Storage converter plugin mechanism was not enabled correctly in Rundeck 4.2.0 and 4.2.1, resulting in use of the encryption layer for Key Storage possibly not working. Any credentials created or overwritten using Rundeck 4.2.0 or 4.2.1 might result in them being written in plaintext to the backend storage. This affects those using any `Storage Converter` plugin. Rundeck 4.3.1 and 4.2.2 have fixed the code and upon upgrade will re-encrypt any plain text values. Version 4.3.0 does not have the vulnerability, but does not include the patch to re-encrypt plain text values if 4.2.0 or 4.2.1 were used. To prevent plaintext credentials from being stored in Rundeck 4.2.0/4.2.1, write access to key storage can be disabled via ACLs. After upgrading to 4.3.1 or later, write access can be restored.

Blaauw Remote Kiln Control through v3.00r4 allows an unauthenticated attacker to access MySQL credentials in cleartext in /engine/db.inc, /lang/nl.bak, or /lang/en.bak.

A certain router administration interface (that includes Realtek APMIB 0.11f for Boa 0.94.14rc21) stores cleartext administrative passwords in flash memory and in a file. This affects TOTOLINK A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0; Rutek RTK 11N AP through 2019-12-12; Sapido GR297n through 2019-12-12; CIK TELECOM MESH ROUTER through 2019-12-12; KCTVJEJU Wireless AP through 2019-12-12; Fibergate FGN-R2 through 2019-12-12; Hi-Wifi MAX-C300N through 2019-12-12; HCN MAX-C300N through 2019-12-12; T-broad GN-866ac through 2019-12-12; Coship EMTA AP through 2019-12-12; and IO-Data WN-AC1167R through 2019-12-12.

SuiteCRM 7.10.x prior to 7.10.21 and 7.11.x prior to 7.11.9 mishandles API access tokens and credentials.

The Customer's Tomedo Server in Version 1.7.3 communicates to the Vendor Tomedo Server via HTTP (in cleartext) that can be sniffed by unauthorized actors. Basic authentication is used for the authentication, making it possible to base64 decode the sniffed credentials and discover the username and password.

NETSAS Enigma NMS 65.0.0 and prior utilises basic authentication over HTTP for enforcing access control to the web application. The use of weak authentication transmitted over cleartext protocols can allow an attacker to steal username and password combinations by intercepting authentication traffic in transit.

Brocade SANnav versions before v2.1.0, contain a Plaintext Password Storage vulnerability.

On Supermicro H11, H12, M11, X9, X10, and X11 products, a combination of encryption and authentication problems in the virtual media service allows capture of BMC credentials and data transferred over virtual media devices. Attackers can use captured credentials to connect virtual USB devices to the server managed by the BMC.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. Sensitive Credentials data is transmitted in cleartext.

D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.

D-Link DSL-2875AL devices through 1.00.05 are prone to password disclosure via a simple crafted /romfile.cfg request to the web management server. This request doesn't require any authentication and will lead to saving the configuration file. The password is stored in cleartext.

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. Stored cleartext passwords could allow an unauthenticated attacker to obtain configured username and password combinations on the RTU due to the weak credentials management on the RTU. An unauthenticated user can obtain the exposed password credentials to gain access to the following services: DDNS service, Mobile Network Provider, and OpenVPN service.

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses HTTP Basic Authentication over cleartext HTTP.

Dynacolor FCM-MB40 v1.2.0.0 use /etc/appWeb/appweb.pass to store administrative web-interface credentials in cleartext. These credentials can be retrieved via cgi-bin/getuserinfo.cgi?mode=info.

Comba AP2600-I devices through A02,0202N00PD2 are prone to password disclosure via an insecure authentication mechanism. The HTML source code of the login page contains values that allow obtaining the username and password. The username are password values are a double md5 of the plaintext real value, i.e., md5(md5(value)).

A vulnerability, which was classified as problematic, has been found in SourceCodester Prison Management System 1.0. This issue affects some unknown processing of the file /uploadImage/Profile/ of the component Profile Image Handler. The manipulation leads to insufficiently protected credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

LemonLDAP::NG -2.0.3 has Incorrect Access Control.

In Gradle Enterprise before 2018.5.3, Build Cache Nodes did not store the credentials at rest in an encrypted format.

Zebra Industrial Printers All Versions, Zebra printers are shipped with unrestricted end-user access to front panel options. If the option to use a passcode to limit the functionality of the front panel is applied, specially crafted packets could be sent over the same network to a port on the printer and the printer will respond with an array of information that includes the front panel passcode for the printer. Once the passcode is retrieved, an attacker must have physical access to the front panel of the printer to enter the passcode to access the full functionality of the front panel.

An issue was discovered in AUO Solar Data Recorder before 1.3.0. The web portal uses HTTP Basic Authentication and provides the account and password in the WWW-Authenticate attribute. By using this account and password, anyone can login successfully.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Unencrypted storage of passwords in the project could allow an attacker with access to port 10005/tcp to obtain passwords of the device. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known

A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.

TeamPass version 2.1.27 and earlier contains a Storing Passwords in a Recoverable Format vulnerability in Shared password vaults that can result in all shared passwords are recoverable server side. This attack appears to be exploitable via any vulnerability that can bypass authentication or role assignment and can lead to shared password leakage.

SickRage before v2018.03.09-1 includes cleartext credentials in HTTP responses.

Echelon SmartServer 1 all versions, SmartServer 2 all versions prior to release 4.11.007, i.LON 100 all versions, and i.LON 600 all versions. The devices store passwords in plaintext, which may allow an attacker with access to the configuration file to log into the SmartServer web user interface.

If an attacker has access to the firmware from the VGo Robot (Versions 3.0.3.52164 and 3.0.3.53662. Prior versions may also be affected) they may be able to extract credentials.

In TotalAlert Web Application in BeaconMedaes Scroll Medical Air Systems prior to v4107600010.23, an attacker with network access to the integrated web server could retrieve default or user defined credentials stored and transmitted in an insecure manner.

A Credentials Management CWE-255 vulnerability exists in the APC UPS Network Management Card 2 AOS v6.5.6, which could cause Remote Monitoring Credentials to be viewed in plaintext when Remote Monitoring is enabled, and then disabled.

Fleet before 2.1.2 allows exposure of SMTP credentials.

An issue was discovered in Mattermost Server before 5.4.0. It mishandles possession of superfluous authentication credentials.

An issue was discovered in Foxit Reader and PhantomPDF before 9.2. It allows NTLM credential theft via a GoToE or GoToR action.

An issue was discovered in Foxit PhantomPDF before 8.3.7. It allows NTLM credential theft via a GoToE or GoToR action.

D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.