D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active.

An issue was discovered in /bin/goahead on D-Link DIR-823G devices with the firmware 1.02B03. There is incorrect access control allowing remote attackers to reset the router without authentication via the SetFactoryDefault HNAP API. Consequently, an attacker can achieve a denial-of-service attack without authentication.

D-Link routers with the mydlink feature have some web interfaces without authentication requirements. An attacker can remotely obtain users' DNS query logs and login logs. Vulnerable targets include but are not limited to the latest firmware versions of DIR-817LW (A1-1.04), DIR-816L (B1-2.06), DIR-816 (B1-2.06?), DIR-850L (A1-1.09), and DIR-868L (A1-1.10).

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. The device can be reset to its default configuration by accessing an unauthenticated URL.

An issue was discovered on D-Link DAP-1360 revision F devices. Remote attackers can start a telnet service without authorization via an undocumented HTTP request. Although this is the primary vulnerability, the impact depends on the firmware version. Versions 609EU through 613EUbeta were tested. Versions through 6.12b01 have weak root credentials, allowing an attacker to gain remote root access. After 6.12b01, the root credentials were changed but the telnet service can still be started without authorization.

There are some web interfaces without authentication requirements on D-Link DIR-868L B1-2.03 and DIR-817LW A1-1.04 routers. An attacker can get the router's username and password (and other information) via a DEVICE.ACCOUNT value for SERVICES in conjunction with AUTHORIZED_GROUP=1%0a to getcfg.php. This could be used to control the router remotely.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link DCS-960L v1.07.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction request header, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-8458.

D-Link DAP-1320 A2-V1.21 routers have some web interfaces without authentication requirements, as demonstrated by uplink_info.xml. An attacker can remotely obtain a user's Wi-Fi SSID and password, which could be used to connect to Wi-Fi or perform a dictionary attack.

There are some web interfaces without authentication requirements on D-Link DIR-412 A1-1.14WW routers. An attacker can get the router's log file via log_get.php, which could be used to discover the intranet network structure.

D-Link DSL-2875AL devices through 1.00.05 are prone to password disclosure via a simple crafted /romfile.cfg request to the web management server. This request doesn't require any authentication and will lead to saving the configuration file. The password is stored in cleartext.

An issue discovered on D-Link DIR-615 devices with firmware version 20.05 and 20.07. wan.htm can be accessed directly without authentication, which can lead to disclosure of information about the WAN, and can also be leveraged by an attacker to modify the data fields of the page.

There are some web interfaces without authentication requirements on D-Link DIR-412 A1-1.14WW routers. An attacker can clear the router's log file via act=clear&logtype=sysact to log_clear.php, which could be used to erase attack traces.

An issue was discovered on D-Link DIR-600M 3.02, 3.03, 3.04, and 3.06 devices. wan.htm can be accessed directly without authentication, which can lead to disclosure of information about the WAN, and can also be leveraged by an attacker to modify the data fields of the page.

D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests.

D-Link DCS-825L firmware version 1.08.01 and possibly prior versions contain an insecure implementation in the mydlink-watch-dog.sh script. The script monitors and respawns the `dcp` and `signalc` binaries without validating their integrity, origin, or permissions. An attacker with filesystem access (e.g., via UART or firmware modification) may replace these binaries to achieve persistent arbitrary code execution with root privileges. The issue stems from improper handling of executable trust and absence of integrity checks in the watchdog logic.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 RunReboot commands without authentication to trigger a reboot.

The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/LoadDefaultSettings to reset the router without authentication.

register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services.

In D-link DIR-816 A2_v1.10CNB04.img,the network can be reset without authentication via /goform/setMAC.

D-Link DSL-124 ME_1.00 contains a configuration file disclosure vulnerability that allows unauthenticated attackers to retrieve router settings through a POST request. Attackers can send a specific POST request to the router's configuration endpoint to download a complete backup file containing sensitive network credentials and system configurations.

D-Link DAP-1325 firmware version 1.01 contains a broken access control vulnerability that allows unauthenticated attackers to download device configuration settings without authentication. Attackers can exploit the /cgi-bin/ExportSettings.sh endpoint to retrieve sensitive configuration information by directly accessing the export settings script.

D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.

D-Link G416 httpd Missing Authentication for Critical Function Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to gain access to critical functions on the device. Was ZDI-CAN-21287.

D-Link D-View shutdown_coreserver Missing Authentication Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the shutdown_coreserver action. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-19572.

Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions.

Several web interfaces in D-Link DIR-868LW 1.12b have no authentication requirements for access, allowing for attackers to obtain users' DNS query history.

Missing authentication for critical function in DAP-1880AC firmware version 1.21 and earlier allows a remote attacker to login to the device as an authenticated user without the access privilege via unspecified vectors.

A vulnerability in the web-based management interface of Cisco HyperFlex HX Data Platform could allow an unauthenticated, remote attacker to upload files to an affected device. This vulnerability is due to missing authentication for the upload function. An attacker could exploit this vulnerability by sending a specific HTTP request to an affected device. A successful exploit could allow the attacker to upload files to the affected device with the permissions of the tomcat8 user.

VDSM and libvirt in Red Hat Enterprise Virtualization Hypervisor (aka RHEV-H) 7-7.x before 7-7.2-20151119.0 and 6-6.x before 6-6.7-20151117.0 as packaged in Red Hat Enterprise Virtualization before 3.5.6 when VSDM is run with -spice disable-ticketing and a VM is suspended and then restored, allows remote attackers to log in without authentication via unspecified vectors.

A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to access the back-end database of an affected system. The vulnerability exists because the affected software does not properly authenticate REST API calls. An attacker could exploit this vulnerability by obtaining a cross-site request forgery (CSRF) token and then using the token with REST API requests. A successful exploit could allow the attacker to access the back-end database of the affected device and read, alter, or drop information.

Control Web Panel Missing Authentication Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Control Web Panel. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of authentication within the web interface. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of a valid CWP user. Was ZDI-CAN-20582.

An issue was discovered on D-Link DSL-2640B E1 EU_1.01 devices. The administrative interface doesn't perform authentication checks for a firmware-update POST request. Any attacker that can access the administrative interface can install firmware of their choice.

Missing authentication and improper input validation in KERUI Wifi Endoscope Camera (YPC99) allow an attacker to execute arbitrary commands (with a length limit of 19 characters) via the "ssid" value, as demonstrated by ssid:;ping 192.168.1.2 in the body of a SETSSID command.

AOMEI Cyber Backup Missing Authentication for Critical Function Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of AOMEI Cyber Backup. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DaoService service, which listens on TCP port 9074 by default. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-26158.

AOMEI Cyber Backup Missing Authentication for Critical Function Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of AOMEI Cyber Backup. Authentication is not required to exploit this vulnerability. The specific flaw exists within the StorageNode service, which listens on TCP port 9075 by default. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-26156.

In Universal Robots Robot Controllers Version CB 3.1, SW Version 3.4.5-100, ports 30001/TCP to 30003/TCP listen for arbitrary URScript code and execute the code. This enables a remote attacker who has access to the ports to remotely execute code that may allow root access to be obtained.

The JMX/RMI interface in Nasdaq BWise 5.0 does not require authentication for an SAP BO Component, which allows remote attackers to execute arbitrary code via a session on port 81.

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

SAP Business Objects Business Intelligence Platform (Live Data Connect), versions 1.0, 2.0, 2.1, 2.2, 2.3, allows an attacker to logon on the Central Management Console without password in case of the BIPRWS application server was not protected with some specific certificate, leading to Missing Authentication Check.

A vulnerability in the Policy Builder interface of Cisco Policy Suite before 18.2.0 could allow an unauthenticated, remote attacker to access the Policy Builder interface. The vulnerability is due to a lack of authentication. An attacker could exploit this vulnerability by accessing the Policy Builder interface. A successful exploit could allow the attacker to make changes to existing repositories and create new repositories. Cisco Bug IDs: CSCvi35109.

A vulnerability in the Redis implementation used by the Cisco Policy Suite for Mobile and Cisco Policy Suite Diameter Routing Agent software could allow an unauthenticated, remote attacker to modify key-value pairs for short-lived events stored by the Redis server. The vulnerability is due to improper authentication when accessing the Redis server. An unauthenticated attacker could exploit this vulnerability by modifying key-value pairs stored within the Redis server database. An exploit could allow the attacker to reduce the efficiency of the Cisco Policy Suite for Mobile and Cisco Policy Suite Diameter Routing Agent software.

Missing Authentication for Critical Function in Icegram Email Subscribers & Newsletters Plugin for WordPress prior to version 4.5.6 allows a remote, unauthenticated attacker to conduct unauthenticated email forgery/spoofing.

A vulnerability in the Open Systems Gateway initiative (OSGi) interface of Cisco Policy Suite before 18.1.0 could allow an unauthenticated, remote attacker to directly connect to the OSGi interface. The vulnerability is due to a lack of authentication. An attacker could exploit this vulnerability by directly connecting to the OSGi interface. An exploit could allow the attacker to access or change any files that are accessible by the OSGi process. Cisco Bug IDs: CSCvh18017.

An issue was discovered on Samsung mobile devices with Q(10.0) software. The DynamicLockscreen Terms and Conditions can be accepted without authentication. The Samsung ID is SVE-2020-17079 (October 2020).

ClickStudios Passwordstate Password Reset Portal prior to build 8501 is affected by an authentication bypass vulnerability. The ResetPassword function does not validate whether the user has successfully authenticated using security questions. An unauthenticated, remote attacker can send a crafted HTTP request to the /account/ResetPassword page to set a new password for any registered user.

Triangle MicroWorks SCADA Data Gateway Missing Authentication Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of Triangle MicroWorks SCADA Data Gateway. Authentication is not required to exploit this vulnerability. The specific flaw exists due to the lack of user authentication. The issue results from missing authentication in the default system configuration. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-20501.

An issue was discovered in Emote Remote Mouse through 4.0.0.0. Attackers can maximize or minimize the window of a running process by sending the process name in a crafted packet. This information is sent in cleartext and is not protected by any authentication logic.

The includes/gateways/stripe/includes/admin/admin-actions.php in GiveWP plugin through 2.5.9 for WordPress allows unauthenticated settings change.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /cnr requests.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has no authentication for /registerCpe requests.