A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.

An authentication bypass exists in the web management interface in Belkin F5D8236-4 v2.

Belkin 54g wireless routers do not properly set an administrative password, which allows remote attackers to gain access via the (1) Telnet or (2) web administration interfaces.

Belkin F5D5230-4 4-Port Cable/DSL Gateway Router 1.20.000 modifies the source IP address of internal packets to that of the router's external interface when forwarding a request from an internal host to an internal web server, which allows remote attackers to hide which host is being used to access the web server.

Belkin Wemo Switch before WeMo_US_2.00.2176.PVT could allow remote attackers to upload arbitrary files onto the system.

A remote unauthenticated user can overflow a stack buffer in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

Belkin 54G (F5D7130) wireless router allows remote attackers to access restricted resources by sniffing URIs from UPNP datagrams, then accessing those URIs, which do not require authentication.

The administration web interface on Belkin Linksys WRT160NL 1.0.04.002_US_20130619 devices allows remote authenticated attackers to execute system commands with root privileges via shell metacharacters in the ui_language POST parameter to the apply.cgi form endpoint. This occurs in do_upgrade_post in mini_httpd. NOTE: This vulnerability only affects products that are no longer supported by the maintaine

A vulnerability was found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this issue is the function formBSSetSitesurvey of the file /goform/formBSSetSitesurvey of the component webs. The manipulation of the argument wan_ipaddr/wan_netmask/wan_gateway/wl_ssid is directly passed by the attacker/so we can control the wan_ipaddr/wan_netmask/wan_gateway/wl_ssid leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this vulnerability is the function formSetWanStatic of the file /goform/formSetWanStatic of the component webs. The manipulation of the argument m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 is directly passed by the attacker/so we can control the m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Belkin F9K1122 1.00.33. It has been classified as critical. This affects the function mp of the file /goform/mp of the component webs. The manipulation of the argument command leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In Belkin N300 Firmware 1.00.08, the script located at /setting_hidden.asp, which is accessible before and after configuring the device, exhibits multiple remote command injection vulnerabilities. The following parameters in the [form name] form; [list vulnerable parameters], are not properly sanitized after being submitted to the web interface in a POST request. With specially crafted parameters, it is possible to inject a an OS command which will be executed with root privileges, as the web interface, and all processes on the device, run as root.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of NetGain Systems Enterprise Manager v7.2.699 build 1001. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the content parameter provided to the script_test.jsp endpoint. A crafted content request parameter can trigger execution of a system call composed from a user-supplied string. An attacker can leverage this vulnerability to execute code under the context of the web service. Was ZDI-CAN-5080.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands.

Shell metacharacter injection vulnerability in /usr/www/include/ajax/GetTest.php in TerraMaster TOS before 3.0.34 leads to remote code execution as root.

Tenable Appliance 3.5 - 4.4.0, and possibly prior versions, contains a flaw in the simpleupload.py script in the Web UI. Through the manipulation of the tns_appliance_session_user parameter, a remote attacker can inject arbitrary commands.

QNAP NAS application Proxy Server through version 1.2.0 allows remote attackers to run arbitrary OS commands against the system with root privileges.

The management interface for the Teltonika RUT9XX routers (aka LuCI) with firmware 00.03.265 and earlier allows remote attackers to execute arbitrary commands with root privileges via shell metacharacters in the username parameter in a login request.

A Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetNetworkTomographySettings.php of D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin because backticks can be used for command injection when judging whether it is a reasonable domain name.

index.php in Softaculous Webuzo before 2.1.4 allows remote attackers to execute arbitrary commands via shell metacharacters in a SOFTCookies sid cookie within a login action.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetNetCheckTools. This vulnerability allows attackers to execute arbitrary commands via the hostName parameter.

QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and obtain sensitive information via unspecified vectors.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via functions, aka NSWA-1304.

A command injection vulnerability exists in the mudler/localai version 2.14.0. The vulnerability arises from the application's handling of the backend parameter in the configuration file, which is used in the name of the initialized process. An attacker can exploit this vulnerability by manipulating the path of the vulnerable binary file specified in the backend parameter, allowing the execution of arbitrary code on the system. This issue is due to improper neutralization of special elements used in an OS command, leading to potential full control over the affected system.

QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and execute arbitrary commands via unspecified vectors.

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the firmware can be updated, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

Command Injection vulnerability in the web interface in McAfee Advanced Threat Defense (ATD) 3.10, 3.8, 3.6, 3.4 allows remote unauthenticated users / remote attackers to execute a command of their choice via a crafted HTTP request parameter.

OS Command Injection vulnerability in McAfee ePolicy Orchestrator (ePO) 5.9.0, 5.3.2, 5.3.1, 5.1.3, 5.1.2, 5.1.1, and 5.1.0 allows attackers to run arbitrary OS commands with limited privileges via not sanitizing the user input data before exporting it into a CSV format output.

The Lenovo Service Framework Android application executes some system commands without proper sanitization of external input. In certain cases, this could lead to command injection which, in turn, could lead to remote code execution.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceMac of the file global.so which can control deviceName to attack.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function NTPSyncWithHost of the file system.so which can control hostTime to attack.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceName of the file global.so which can control thedeviceName to attack.

A remote command execution (RCE) vulnerability was found in FeMiner wms V1.0 in /wms/src/system/datarec.php. The $_POST[r_name] is directly passed into the $mysqlstr and is executed by exec.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getImageMP4.php is vulnerable to a command injection attack.

Sharetribe Go is a source available marketplace software. In affected versions operating system command injection is possible on installations of Sharetribe Go, that do not have a secret AWS Simple Notification Service (SNS) notification token configured via the `sns_notification_token` configuration parameter. This configuration parameter is unset by default. The vulnerability has been patched in version 10.2.1. Users who are unable to upgrade should set the`sns_notification_token` configuration parameter to a secret value.

A Command Injection issue was discovered in ContentStore/Base/CVDataPipe.dll in Commvault before v11 SP6. A certain message parsing function inside the Commvault service does not properly validate the input of an incoming string before passing it to CreateProcess. As a result, a specially crafted message can inject commands that will be executed on the target operating system. Exploitation of this vulnerability does not require authentication and can lead to SYSTEM level privilege on any system running the cvd daemon. This is a different vulnerability than CVE-2017-3195.

A OS Command Injection vulnerability was discovered in Artica Proxy 4.30.000000. Attackers can execute OS commands in cyrus.events.php with GET param logs and POST param rp.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getSpiritsFromVideo.php is vulnerable to a command injection attack.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Netgain Enterprise Manager. Authentication is not required to exploit this vulnerability. The specific flaw exists within exec.jsp. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code under the context of the current user. Was ZDI-CAN-4749.

In Mercurial before 4.4.1, it is possible that a specially malformed repository can cause Git subrepositories to run arbitrary code in the form of a .git/hooks/post-update script checked into the repository. Typical use of Mercurial prevents construction of such repositories, but they can be created programmatically.

A command injection vulnerability in Nokogiri v1.10.3 and earlier allows commands to be executed in a subprocess via Ruby's `Kernel.open` method. Processes are vulnerable only if the undocumented method `Nokogiri::CSS::Tokenizer#load_file` is being called with unsafe user input as the filename. This vulnerability appears in code generated by the Rexical gem versions v1.0.6 and earlier. Rexical is used by Nokogiri to generate lexical scanner code for parsing CSS queries. The underlying vulnerability was addressed in Rexical v1.0.7 and Nokogiri upgraded to this version of Rexical in Nokogiri v1.10.4.

In GenieACS 1.2.x before 1.2.8, the UI interface API is vulnerable to unauthenticated OS command injection via the ping host argument (lib/ui/api.ts and lib/ping.ts). The vulnerability arises from insufficient input validation combined with a missing authorization check.

A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 in the General.Time.NTP.Server parameter to the sub_C8C8 function of the binary /opt/cgi/view/param, which could let a remove malicious user execute arbitrary code.

Zivif PR115-204-P-RS V2.3.4.2103 and V4.7.4.2121 (and possibly in-between versions) web cameras are vulnerable to unauthenticated, blind remote command injection via CGI scripts used as part of the web interface, as demonstrated by a cgi-bin/iptest.cgi?cmd=iptest.cgi&-time="1504225666237"&-url=$(reboot) request.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_php_pecl.php. When parsing the modulo parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9728.

Ohcount 3.0.0 is prone to a command injection via specially crafted filenames containing shell metacharacters, which can be exploited by an attacker (providing a source tree for Ohcount processing) to execute arbitrary code as the user running Ohcount.