The SMI-S service in Dell Storage Manager versions earlier than 16.3.20 (aka 2016 R3.20) is protected using a hard-coded password. A remote user with the knowledge of the password might potentially disable the SMI-S service via HTTP requests, affecting storage management and monitoring functionality via the SMI-S interface. This issue, aka DSM-30415, only affects a Windows installation of the Data Collector (not applicable to the virtual appliance).

Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices have default credentials that are hardcoded in the firmware and can be extracted by anyone who reverses the firmware to identify them. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro, one will notice that this follows a ARM little endian format. The function sub_3DB2FC in IDA pro is identified to be setting up the values at address 0x003DB5A6. The sub_5C057C then sets this value and adds it to the Configuration files in /mnt/mtd/Config/Account1 file.

An authentication bypass was found in an unknown area of the SiteOmat source code. All SiteOmat BOS versions are affected, prior to the submission of this exploit. Also, the SiteOmat does not force administrators to switch passwords, leaving SSH and HTTP remote authentication open to public.

D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices have a hardcoded password of wrgac25_dlink.2013gui_dir850l for the Alphanetworks account upon device reset, which allows remote attackers to obtain root access via a TELNET session.

The Carlo Gavazzi EOS-Box stores hard-coded passwords in the PHP file of the device. By using the hard-coded passwords, attackers can log into the device with administrative privileges. This could allow the attacker to have unauthorized access.

An issue was discovered in Polycom Web Management Interface G3/HDX 8000 HD with Durango 2.6.0 4740 software and embedded Polycom Linux Development Platform 2.14.g3. It has a blank administrative password by default, and can be successfully used without setting this password.

A Use of Hard-coded Cryptographic Key issue was discovered in Korenix JetNet JetNet5018G version 1.4, JetNet5310G version 1.4a, JetNet5428G-2G-2FX version 1.4, JetNet5628G-R version 1.4, JetNet5628G version 1.4, JetNet5728G-24P version 1.4, JetNet5828G version 1.1d, JetNet6710G-HVDC version 1.1e, and JetNet6710G version 1.1. An attacker may gain access to hard-coded certificates and private keys allowing the attacker to perform man-in-the-middle attacks.

GE Centricity PACS RA1000, diagnostic image analysis, all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

A vulnerability in the key-based SSH authentication mechanism of Cisco Policy Suite could allow an unauthenticated, remote attacker to log in to an affected system as the root user. This vulnerability is due to the re-use of static SSH keys across installations. An attacker could exploit this vulnerability by extracting a key from a system under their control. A successful exploit could allow the attacker to log in to an affected system as the root user.

EMV DiskXtender 6.20.060 has a hard-coded login and password, which allows remote attackers to bypass authentication via the RPC interface.

Ops CLI version 2.0.4 (and earlier) is affected by a Deserialization of Untrusted Data vulnerability to achieve arbitrary code execution when the checkout_repo function is called on a maliciously crafted file. An attacker can leverage this to execute arbitrary code on the victim machine.

The Epson "EasyMP" software is designed to remotely stream a users computer to supporting projectors.These devices are authenticated using a unique 4-digit code, displayed on-screen - ensuring only those who can view it are streaming.In addition to the password, each projector has a hardcoded "backdoor" code (2270), which authenticates to all devices.

A hard-coded password of tecn0visi0n for the dlxuser account in TecnoVISION DLX Spot Player4 (all known versions) allows remote attackers to log in via SSH and escalate privileges to root access with the same credentials.

GE GEMNet License server (EchoServer) all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

Adobe Connect version 11.2.3 (and earlier) is affected by a Deserialization of Untrusted Data vulnerability to achieve arbitrary method invocation when AMF messages are deserialized on an Adobe Connect server. An attacker can leverage this to execute remote code execution on the server.

An authentication bypass vulnerability exists in the device password generation functionality of Swift Sensors Gateway SG3-1010. A specially-crafted network request can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A Hardcoded JWT Secret Key in metadata.py in AdaptiveScale LXDUI through 2.1.3 allows attackers to gain admin access to the host system.

The firmware of EDIMAX IC-3140W Version 3.11 is hardcoded with Administrator username and password.

The Data Warehouse component in NetApp OnCommand Insight before 7.2.3 allows remote attackers to obtain administrative access by leveraging a default privileged account.

An issue was discovered on Wireless IP Camera 360 devices. Remote attackers can discover a weakly encoded admin password by connecting to TCP port 9527 and reading the password field of the debugging information, e.g., nTBCS19C corresponds to a password of 123456.

The camel-castor component in Apache Camel 2.x before 2.19.4 and 2.20.x before 2.20.1 is vulnerable to Java object de-serialisation vulnerability. De-serializing untrusted data can lead to security flaws.

Revive Adserver before 4.0.1 allows remote attackers to execute arbitrary code via serialized data in the cookies related to the delivery scripts.

An issue was discovered in Veritas NetBackup Before 8.0 and NetBackup Appliance Before 3.0. NetBackup Cloud Storage Service uses a hardcoded username and password.

A Remote Code Execution vulnerability in HPE intelligent Management Center (iMC) PLAT version IMC Plat 7.3 E0504P2 and earlier was found.

A Remote Code Execution vulnerability in HPE intelligent Management Center (iMC) PLAT version IMC Plat 7.3 E0504P2 and earlier was found.

An issue was discovered on PLANEX CS-W50HD devices with firmware before 030720. A hardcoded credential "supervisor:dangerous" was injected into web authentication database "/.htpasswd" during booting process, which allows attackers to gain unauthorized access and control the device completely; the account can't be modified or deleted.

A Remote Code Execution vulnerability in HPE intelligent Management Center (iMC) PLAT version IMC Plat 7.3 E0504P2 and earlier was found.

IBM Tealeaf Customer Experience 8.7, 8.8, and 9.0.2 contains hard-coded credentials. A remote attacker could exploit this vulnerability to gain access to the system. IBM X-Force ID: 123740.

The Reporting Compatibility Add On before 2.0.4 for OpenMRS, as distributed in OpenMRS Reference Application before 2.6.1, does not authenticate users when deserializing XML input into ReportSchema objects. The result is that remote unauthenticated users are able to execute operating system commands by crafting malicious XML payloads, as demonstrated by a single admin/reports/reportSchemaXml.form request.

An issue was discovered in heinekingmedia StashCat through 1.7.5 for Android. The keystore is locked with a hard-coded password. Therefore, everyone with access to the keystore can read the content out, for example the private key of the user.

In HPE Storage Essentials 9.5.0.142, there is Unauthenticated Java Deserialization with remote code execution via OS commands in a request to invoker/JMXInvokerServlet, aka PSRT110461.

All versions prior to V12.17.20 of the ZTE Microwave NR8000 series products - NR8120, NR8120A, NR8120, NR8150, NR8250, NR8000 TR and NR8950 are the applications of C/S architecture using the Java RMI service in which the servers use the Apache Commons Collections (ACC) library that may result in Java deserialization vulnerabilities. An unauthenticated remote attacker can exploit the vulnerabilities by sending a crafted RMI request to execute arbitrary code on the target host.

EMC ESRS Policy Manager prior to 6.8 contains an undocumented account (OpenDS admin) with a default password. A remote attacker with the knowledge of the default password may login to the system and gain administrator privileges to the local LDAP directory server.

MEDHOST Connex contains hard-coded credentials that are used for customer database access. An attacker with knowledge of the hard-coded credentials and the ability to communicate directly with the database may be able to obtain or modify sensitive patient and financial information. Connex utilizes an IBM i DB2 user account for database access. The account name is HMSCXPDN. Its password is hard-coded in multiple places in the application. Customers do not have the option to change this password. The account has elevated DB2 roles, and can access all objects or database tables on the customer DB2 database. This account can access data through ODBC, FTP, and TELNET. Customers without Connex installed are still vulnerable because the MEDHOST setup program creates this account.

The Java implementation of AMF3 deserializers used in Flamingo amf-serializer by Exadel, version 2.2.0, may allow instantiation of arbitrary classes via their public parameter-less constructor and subsequently call arbitrary Java Beans setter methods. The ability to exploit this vulnerability depends on the availability of classes in the class path that make use of deserialization. A remote attacker with the ability to spoof or control information may be able to send serialized Java objects with pre-set properties that result in arbitrary code execution when deserialized.

ACTi cameras including the D, B, I, and E series using firmware version A1D-500-V6.11.31-AC fail to properly restrict access to the factory reset page. An unauthenticated, remote attacker can exploit this vulnerability by directly accessing the http://x.x.x.x/setup/setup_maintain_firmware-default.html page. This will allow an attacker to perform a factory reset on the device, leading to a denial of service condition or the ability to make use of default credentials (CVE-2017-3186).

VMware vSphere Data Protection (VDP) 6.1.x, 6.0.x, 5.8.x, and 5.5.x contains a deserialization issue. Exploitation of this issue may allow a remote attacker to execute commands on the appliance.

Apache Camel's camel-snakeyaml component is vulnerable to Java object de-serialization vulnerability. De-serializing untrusted data can lead to security flaws.

ACTi cameras including the D, B, I, and E series using firmware version A1D-500-V6.11.31-AC use non-random default credentials across all devices. A remote attacker can take complete control of a device using default admin credentials.

Adobe ColdFusion 2016 Update 3 and earlier, ColdFusion 11 update 11 and earlier, ColdFusion 10 Update 22 and earlier have a Java deserialization vulnerability in the Apache BlazeDS library. Successful exploitation could lead to arbitrary code execution.

IBM XIV Storage System 2810-A14 and 2812-A14 devices before level 10.2.4.e-2 and 2810-114 and 2812-114 devices before level 11.1.1 have hardcoded passwords for unspecified accounts, which allows remote attackers to gain user access via unknown vectors. IBM X-Force ID: 75041.

Inductive Automation Ignition ParameterVersionJavaSerializationCodec Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Inductive Automation Ignition. Authentication is not required to exploit this vulnerability. The specific flaw exists within the ParameterVersionJavaSerializationCodec class. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-20290.

Inductive Automation Ignition JavaSerializationCodec Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Inductive Automation Ignition. Authentication is not required to exploit this vulnerability. The specific flaw exists within the JavaSerializationCodec class. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-20291.

In vBulletin through 5.3.x, there is an unauthenticated deserialization vulnerability that leads to arbitrary file deletion and, under certain circumstances, code execution, because of unsafe usage of PHP's unserialize() in vB_Library_Template's cacheTemplates() function, which is a publicly exposed API. This is exploited with the templateidlist parameter to ajax/api/template/cacheTemplates.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Netgain Enterprise Manager. Authentication is not required to exploit this vulnerability. The specific flaw exists within an exposed RMI registry, which listens on TCP ports 1800 and 1850 by default. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute arbitrary code under the context of the current process. Was ZDI-CAN-4753.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 contains multiple hard coded credentials for the Telnet and SSH interfaces.

DomPDF before version 2.0.0 is vulnerable to PHAR deserialization due to a lack of checking on the protocol before passing it into the file_get_contents() function. An attacker who can upload files of any type to the server can pass in the phar:// protocol to unserialize the uploaded file and instantiate arbitrary PHP objects. This can lead to remote code execution, especially when DOMPdf is used with frameworks with documented POP chains like Laravel or vulnerable developer code.

TX9 Automatic Food Dispenser v3.2.57 devices allow access to a shell as root/superuser, a related issue to CVE-2019-16734. To connect, the telnet service is used on port 23 with the default password of 059AnkJ for the root account. The user can then download the filesystem through preinstalled BusyBox utilities (e.g., tar and nc).

GE Xeleris versions 1.0,1.1,2.1,3.0,3.1, medical imaging systems, all current versions are affected, these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

CrushFTP 8.x before 8.2.0 has a serialization vulnerability.