The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to manipulate memory with controlled values and remotely execute code on the OPC UA Tunneller (versions prior to 6.3.0.8233).

An arbitrary memory write vulnerability exists in the dual_onsrv.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, that could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

A file inclusion vulnerability exists in the confd.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, which could lead to accepting an arbitrary file into the function, and potential information disclosure or remote code execution. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Multiple heap-based buffer overflow vulnerabilities exist in Honeywell Experion PKS all versions prior to R400.6, all versions prior to R410.6, and all versions prior to R430.2 modules, which could lead to possible remote code execution or denial of service. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

Multiple stack-based buffer overflows in (1) HWOPOSScale.ocx and (2) HWOPOSSCANNER.ocx in Honeywell OPOS Suite before 1.13.4.15 allow remote attackers to execute arbitrary code via a crafted file that is improperly handled by the Open method.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch are vulnerable to an unsafe deserialization of untrusted data. An attacker may be able to remotely modify deserialized data without authentication using a specially crafted web request, resulting in remote code execution.

The following versions of MAXPRO VMS and NVR, MAXPRO VMS:HNMSWVMS prior to Version VMS560 Build 595 T2-Patch, HNMSWVMSLT prior to Version VMS560 Build 595 T2-Patch, MAXPRO NVR: MAXPRO NVR XE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR SE prior to Version NVR 5.6 Build 595 T2-Patch, MAXPRO NVR PE prior to Version NVR 5.6 Build 595 T2-Patch, and MPNVRSWXX prior to Version NVR 5.6 Build 595 T2-Patch contain an SQL injection vulnerability that could give an attacker remote unauthenticated access to the web user interface with administrator-level privileges.

Honeywell Notifier Web Server (NWS) Version 3.50 is vulnerable to a path traversal attack, which allows an attacker to bypass access to restricted directories. Honeywell has released a firmware update to address the problem.

Honeywell equIP series and Performance series IP cameras and recorders, A vulnerability exists in the affected products where IP cameras and recorders have a potential replay attack vulnerability as a weak authentication method is retained for compatibility with legacy products.

An issue was discovered in Honeywell XL Web II controller XL1000C500 XLWebExe-2-01-00 and prior, and XLWeb 500 XLWebExe-1-02-08 and prior. A user without authenticating can make a directory traversal attack by accessing a specific URL.

Server information leak for the CDA Server process memory can occur when an error is generated in response to a specially crafted message. See Honeywell Security Notification for recommendations on upgrading and versioning.

Controller DoS due to buffer overflow in the handling of a specially crafted message received by the controller. See Honeywell Security Notification for recommendations on upgrading and versioning. See Honeywell Security Notification for recommendations on upgrading and versioning.

Server or Console Station DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Experion server may experience a DoS due to a heap overflow which could occur when handling a specially crafted message

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Experion server may experience a DoS due to a stack overflow when handling a specially crafted message.

vmtypedarrayobject.cpp in Mozilla Firefox before 28.0, Firefox ESR 24.x before 24.4, Thunderbird before 24.4, and SeaMonkey before 2.25 does not validate the length of the destination array before a copy operation, which allows remote attackers to execute arbitrary code or cause a denial of service (out-of-bounds write and application crash) by triggering incorrect use of the TypedArrayObject class.

Stack-based buffer overflow in Dassault Systemes CATIA V5-6R2013 allows remote attackers to execute arbitrary code via a crafted packet, related to "CATV5_Backbone_Bus."

Quake3e < 5ed740d is affected by: Buffer Overflow. The impact is: Possible code execution and denial of service. The component is: Argument string creation.

A heap-based buffer overflow vulnerability exists in the configuration server functionality of the Cosori Smart 5.8-Quart Air Fryer CS158-AF 1.1.0. A specially crafted JSON object can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability.

A vulnerability was found in WebAssembly wabt 1.0.36 and classified as critical. This issue affects the function wabt::interp::(anonymous namespace)::BinaryReaderInterp::OnExport of the file wabt/src/interp/binary-reader-interp.cc of the component Malformed File Handler. The manipulation leads to heap-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue.

A stack-based buffer overflow vulnerability in FortiWeb 6.3.0 through 6.3.5 and version before 6.2.4 may allow an unauthenticated, remote attacker to overwrite the content of the stack and potentially execute arbitrary code by sending a crafted request with a large certname.

Heap-based buffer overflow in the SPDY implementation in nginx 1.3.15 before 1.4.7 and 1.5.x before 1.5.12 allows remote attackers to execute arbitrary code via a crafted request.

An issue was discovered in Treck IPv6 before 6.0.1.68. Improper Input Validation in the IPv6 component allows an unauthenticated remote attacker to cause an Out of Bounds Write, and possibly a Denial of Service via network access.

Multiple heap-based buffer overflows in the ZRLE_DECODE function in common/rfb/zrleDecode.h in TigerVNC before 1.3.1, when NDEBUG is enabled, allow remote VNC servers to cause a denial of service (vncviewer crash) and possibly execute arbitrary code via vectors related to screen image rendering.

An issue was discovered in py-lmdb 0.97. For certain values of mn_flags, mdb_cursor_set triggers a memcpy with an invalid write operation within mdb_xcursor_init1. NOTE: this outcome occurs when accessing a data.mdb file supplied by an attacker.

An issue was discovered in Foxit Reader and PhantomPDF before 10.1. In a certain Shading calculation, the number of outputs is unequal to the number of color components in a color space. This causes an out-of-bounds write.

A vulnerability classified as critical was found in Open Asset Import Library Assimp 5.4.3. This vulnerability affects the function Assimp::GetNextLine in the library ParsingUtils.h of the component File Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Open Asset Import Library Assimp 5.4.3. This issue affects the function Assimp::BaseImporter::ConvertToUTF8 of the file BaseImporter.cpp of the component File Handler. The manipulation leads to heap-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Heap-based buffer overflow in the fcgid_header_bucket_read function in fcgid_bucket.c in the mod_fcgid module before 2.3.9 for the Apache HTTP Server allows remote attackers to have an unspecified impact via unknown vectors.

A stack-based buffer overflow vulnerability has been reported to affect QNAP NAS devices running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. QNAP have already fixed this vulnerability in the following versions: Surveillance Station 5.1.5.4.3 (and later) for ARM CPU NAS (64bit OS) and x86 CPU NAS (64bit OS) Surveillance Station 5.1.5.3.3 (and later) for ARM CPU NAS (32bit OS) and x86 CPU NAS (32bit OS)

Heap buffer overflow in the fxCheckArrowFunction function at moddable/xs/sources/xsSyntaxical.c:3562 in Moddable SDK before OS200903.

Xjp2.dll in XnView before 2.13 allows remote attackers to execute arbitrary code via (1) the Csiz parameter in a SIZ marker, which triggers an incorrect memory allocation, or (2) the lqcd field in a QCD marker in a crafted JPEG2000 file, which leads to a heap-based buffer overflow.

There is a heap-buffer-overflow at jmem-poolman.c:165 in jmem_pools_collect_empty in JerryScript 2.2.0.

MiniDLNA has heap-based buffer overflow

An issue was discovered in py-lmdb 0.97. For certain values of md_flags, mdb_node_add does not properly set up a memcpy destination, leading to an invalid write operation. NOTE: this outcome occurs when accessing a data.mdb file supplied by an attacker.

CODESYS V2.3 ENI server up to V3.2.2.24 has a Buffer Overflow.

An unauthenticated stack-based buffer overflow vulnerability in common.c's handle_PORT in uftpd FTP server versions 2.10 and earlier can be abused to cause a crash and could potentially lead to remote code execution.

A vulnerability, which was classified as critical, was found in FFmpeg up to 7.1. This affects the function ff_aac_search_for_tns of the file libavcodec/aacenc_tns.c of the component AAC Encoder. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

xbuf_format_converter, used as part of exif_read_data, was appending a terminating null character to the generated string, but was not using its standard append char function. As a result, if the buffer was full, it would result in an out-of-bounds write. This issue affects HHVM versions prior to 4.56.3, all versions between 4.57.0 and 4.80.1, all versions between 4.81.0 and 4.93.1, and versions 4.94.0, 4.95.0, 4.96.0, 4.97.0, 4.98.0.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1562 1.10. Affected by this issue is the function http_request_parse of the component HTTP Header Handler. The manipulation of the argument Authorization leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, does not properly implement web audio nodes, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors.

A security flaw has been discovered in Open5GS up to 2.7.6. Affected by this vulnerability is the function hss_ogs_diam_cx_mar_cb of the file src/hss/hss-cx-path.c of the component VoLTE Cx-Test. The manipulation of the argument OGS_KEY_LEN results in stack-based buffer overflow. The attack may be launched remotely. The patch is identified as 54dda041211098730221d0ae20a2f9f9173e7a21. A patch should be applied to remediate this issue.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

HT Editor 2.0.20 has a Remote Stack Buffer Overflow Vulnerability

Multiple stack-based buffer overflows in file-xwd.c in the X Window Dump (XWD) plug-in in GIMP 2.8.2 allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a large (1) red, (2) green, or (3) blue color mask in an XWD file.

In Xiaomi router R3600, ROM version<1.0.20, the connection service can be injected through the web interface, resulting in stack overflow or remote code execution.

Stack-based buffer overflow vulnerability in Vigor3900, Vigor2960, and Vigor300B with firmware before 1.5.1.1.