A flaw in Thunderbird's implementation of iCal causes a heap buffer overflow in parser_get_next_char when processing certain email messages, resulting in a potentially exploitable crash. This vulnerability affects Thunderbird < 60.7.1.
Heap corruption in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable information disclosure, escalation of privilege and/or denial of service via network access.
In WebAccess/SCADA, Versions 8.3.5 and prior, multiple stack-based buffer overflow vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution.
There is a Memory Buffer Improper Operation Limit Vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause malicious code to be executed.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.
In Teeworlds 0.7.2, there is a failed bounds check in CDataFileReader::GetData() and CDataFileReader::ReplaceData() and related functions in engine/shared/datafile.cpp that can lead to an arbitrary free and out-of-bounds pointer write, possibly resulting in remote code execution.
pubRsaDecryptSignedElementExt in MatrixSSL 4.0.1 Open, as used in Inside Secure TLS Toolkit, has a stack-based buffer overflow during X.509 certificate verification because of missing validation in psRsaDecryptPubExt in crypto/pubkey/rsa_pub.c.
In WebAccess/SCADA Versions 8.3.5 and prior, multiple heap-based buffer overflow vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution. Note: A different vulnerability than CVE-2019-10991.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
An issue was discovered in D-Link DIR-806 devices. There is a stack-based buffer overflow in function hnap_main at /htdocs/cgibin. The function will call sprintf without checking the length of strings in parameters given by HTTP header and can be controlled by users. And it finally leads to a stack-based buffer overflow via a special HTTP header.
An out-of-bounds write vulnerability exists in the JPG format SOF marker processing of Accusoft ImageGear 19.8. A specially crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.
ZTE MF971R product has two stack-based buffer overflow vulnerabilities. An attacker could exploit the vulnerabilities to execute arbitrary code.
Out of boundary access is possible as there is no validation of data accessed against the received size of the packet in case of malicious firmware in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCN7605, QCS405, QCS605, QM215, SA6155P, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130
An attacker could send a crafted HTTP/HTTPS request to render the web server unavailable and/or lead to remote code execution caused by a stack-based buffer overflow vulnerability. A cold restart is required for recovering CompactLogix 5370 L1, L2, and L3 Controllers, Compact GuardLogix 5370 controllers, and Armor Compact GuardLogix 5370 Controllers Versions 20 - 30 and earlier.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
In PHP imagick extension in versions between 3.3.0 and 3.4.4, writing to an array of values in ImagickKernel::fromMatrix() function did not check that the address will be within the allocated array. This could lead to out of bounds write to memory if the function is called with the data controlled by untrusted party.
Gnome Pango 1.42 and later is affected by: Buffer Overflow. The impact is: The heap based buffer overflow can be used to get code execution. The component is: function name: pango_log2vis_get_embedding_levels, assignment of nchars and the loop condition. The attack vector is: Bug can be used when application pass invalid utf-8 strings to functions like pango_itemize.
A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.
borg-reducer c6d5240 is affected by: Buffer Overflow. The impact is: Possible code execution and denial of service. The component is: Output parameter within the executable.
RIOT RIOT-OS version after commit 7af03ab624db0412c727eed9ab7630a5282e2fd3 contains a Buffer Overflow vulnerability in sock_dns, an implementation of the DNS protocol utilizing the RIOT sock API that can result in Remote code executing. This attack appears to be exploitable via network connectivity.
A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka "Windows DHCP Client Remote Code Execution Vulnerability." This affects Windows 10, Windows 10 Servers.
Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Code execution in the context of TEE core (kernel). The component is: optee_os. The fixed version is: 3.4.0 and later.
A memory corruption vulnerability exists in the Windows Server DHCP service when processing specially crafted packets, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.
Heap-based buffer overflow in the PackBitsPreEncode function in tif_packbits.c in bmp2tiff in libtiff 4.0.6 and earlier allows remote attackers to execute arbitrary code or cause a denial of service via a large width field in a BMP image.
A flaw was found in the Linux kernel. A heap based buffer overflow in mwifiex_uap_parse_tail_ies function in drivers/net/wireless/marvell/mwifiex/ie.c might lead to memory corruption and possibly other consequences.
Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Code execution in context of TEE core (kernel). The component is: optee_os. The fixed version is: 3.4.0 and later.
eQ-3 HomeMatic CCU2 devices before 2.41.9 and CCU3 devices before 3.43.16 have buffer overflows in the ReGa ise GmbH HTTP-Server 2.0 component, aka HMCCU-179. This may lead to remote code execution.
Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Execution of code in TEE core (kernel) context. The component is: optee_os. The fixed version is: 3.4.0 and later.
Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Boundary crossing. The impact is: Memory corruption of the TEE itself. The component is: optee_os. The fixed version is: 3.4.0 and later.
OFFIS.de DCMTK 3.6.3 and below is affected by: Buffer Overflow. The impact is: Possible code execution and confirmed Denial of Service. The component is: DcmRLEDecoder::decompress() (file dcrledec.h, line 122). The attack vector is: Many scenarios of DICOM file processing (e.g. DICOM to image conversion). The fixed version is: 3.6.4, after commit 40917614e.
Linaro/OP-TEE OP-TEE 3.3.0 and earlier is affected by: Buffer Overflow. The impact is: Memory corruption and disclosure of memory content. The component is: optee_os. The fixed version is: 3.4.0 and later.
JerryScript commit 4e58ccf68070671e1fff5cd6673f0c1d5b80b166 is affected by: Buffer Overflow. The impact is: denial of service and possibly arbitrary code execution. The component is: function lit_char_to_utf8_bytes (jerry-core/lit/lit-char-helpers.c:377). The attack vector is: executing crafted javascript code. The fixed version is: after commit 505dace719aebb3308a3af223cfaa985159efae0.
X-Plane before 11.41 allows Arbitrary Memory Write via crafted network packets, which could cause a denial of service or arbitrary code execution.
Quake3e < 5ed740d is affected by: Buffer Overflow. The impact is: Possible code execution and denial of service. The component is: Argument string creation.
A heap-based buffer overflow vulnerability exists in the XML Decompression PlainTextUncompressor::UncompressItem functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.
A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP failover server, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.
A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP server, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.
A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0698, CVE-2019-0726.
Linaro/OP-TEE OP-TEE Prior to version v3.4.0 is affected by: Boundary checks. The impact is: This could lead to corruption of any memory which the TA can access. The component is: optee_os. The fixed version is: v3.4.0.
A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.
A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.
An out-of-bounds write vulnerability exists in the device TestEmail functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted network request can lead to an out-of-bounds write. An attacker can send an HTTP request to trigger this vulnerability.
A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0697, CVE-2019-0698.
In bta_dm_sdp_result of bta_dm_act.cc, there is a possible out of bounds stack write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-6.0 Android-6.0.1 Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android ID: A-74016921.
A memory corruption vulnerability exists in the XML-parsing ParseAttribs functionality of AT&T Labs’ Xmill 0.7. A specially crafted XML file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.
Stack-based buffer overflow in Asuswrt-Merlin firmware for ASUS devices older than 384.4 and ASUS firmware before 3.0.0.4.382.50470 for devices allows remote attackers to execute arbitrary code by providing a long string to the blocking.asp page via a GET or POST request. Vulnerable parameters are flag, mac, and cat_id.
FreeRDP prior to version 2.0.0-rc4 contains an Integer Truncation that leads to a Heap-Based Buffer Overflow in function update_read_bitmap_update() and results in a memory corruption and probably even a remote code execution.
FreeRDP prior to version 2.0.0-rc4 contains an Out-Of-Bounds Write of up to 4 bytes in function nsc_rle_decode() that results in a memory corruption and possibly even a remote code execution.
In bta_ag_parse_cmer of bta_ag_cmd.cc in Android-7.0, Android-7.1.1, Android-7.1.2, Android-8.0, Android-8.1 and Android-9, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution in the bluetooth server with no additional execution privileges needed. User interaction is not needed for exploitation. Android ID: A-112860487.