SQL injection vulnerability in the updateStatus function in lib/models/benefits/Hsp.php in OrangeHRM before 2.7 allows remote authenticated users to execute arbitrary SQL commands via the hspSummaryId parameter to plugins/ajaxCalls/haltResumeHsp.php. NOTE: some of these details are obtained from third party information.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation, resulting in a root shell. An attacker can inject OS commands into the ip= parm in the "/goform/net_WebPingGetValue" URI to trigger this vulnerability.

OS Command Injection vulnerability exists in multiple Network Cameras TRIFORA 3 series provided by TOA Corporation, which may allow a logged-in user with the low("monitoring user") or higher privilege to execute an arbitrary OS command.

A vulnerability was found in Byzoro Smart S45F Multi-Service Secure Gateway Intelligent Management Platform up to 20230928 and classified as critical. Affected by this issue is some unknown functionality of the file /log/download.php. The manipulation of the argument file leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-241646 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in XixianLiang HarmonyOS-mcp-server 0.1.0. This vulnerability affects the function input_text. The manipulation of the argument text leads to os command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

Maxum Rumpus 8.2.13 and 8.2.14 is affected by a command injection vulnerability. The web administration contains functionality in which administrators are able to manage users. The edit users form contains a parameter vulnerable to command injection due to insufficient validation.

A vulnerability has been discovered in BigTree CMS 4.4.10 and earlier which allows an authenticated attacker to execute arbitrary commands through a crafted request sent to the server via the 'Create a New Setting' function.

A vulnerability was detected in Totolink WA300 5.2cu.7112_B20190227. The impacted element is the function setAPNetwork of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Ipaddr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231010 and classified as critical. This issue affects some unknown processing of the file /sysmanage/importconf.php. The manipulation of the argument btn_file_renew leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-243059. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on Enphase Envoy R3.x and D4.x (and other current) devices. The upgrade_start function in /installer/upgrade_start allows remote authenticated users to execute arbitrary commands via the force parameter.

Nagios XI 5.7.2 is affected by a remote code execution (RCE) vulnerability. An authenticated user can inject additional commands into normal webapp query.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later)

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

A security flaw has been discovered in D-Link DIR-823X 250416. Impacted is the function sub_41E2A0 of the file /goform/set_mode. Performing a manipulation of the argument lan_gateway results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

The Yale WIPC-303W 2.21 through 2.31 camera is vulnerable to remote command execution (RCE) through command injection via the HTTP API. NOTE: This may be a duplicate of CVE-2020-10176

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function cgiMain of the file /cgi-bin/upload.cgi. Executing manipulation of the argument filename can lead to os command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

In the git-tag-annotation-action (open source GitHub Action) before version 1.0.1, an attacker can execute arbitrary (*) shell commands if they can control the value of [the `tag` input] or manage to alter the value of [the `GITHUB_REF` environment variable]. The problem has been patched in version 1.0.1. If you don't use the `tag` input you are most likely safe. The `GITHUB_REF` environment variable is protected by the GitHub Actions environment so attacks from there should be impossible. If you must use the `tag` input and cannot upgrade to `> 1.0.0` make sure that the value is not controlled by another Action.

IBM Security Guardium 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 124633.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

A high severity vulnerability was found in all active versions of Red Hat CloudForms before 5.11.7.0. The out of band OS command injection vulnerability can be exploited by authenticated attacker while setuping conversion host through Infrastructure Migration Solution. This flaw allows attacker to execute arbitrary commands on CloudForms server.

A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in LB-LINK BL-X26 1.2.8. The impacted element is an unknown function of the file /goform/set_hidessid_cfg of the component HTTP Handler. This manipulation of the argument enable causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

Open WebUI PIP install_frontmatter_requirements Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Open WebUI. Authentication is required to exploit this vulnerability. The specific flaw exists within the install_frontmatter_requirements function.The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-28258.

The git hook feature in Gitea 1.1.0 through 1.12.5 might allow for authenticated remote code execution in customer environments where the documentation was not understood (e.g., one viewpoint is that the dangerousness of this feature should be documented immediately above the ENABLE_GIT_HOOKS line in the config file). NOTE: The vendor has indicated this is not a vulnerability and states "This is a functionality of the software that is limited to a very limited subset of accounts. If you give someone the privilege to execute arbitrary code on your server, they can execute arbitrary code on your server. We provide very clear warnings to users around this functionality and what it provides.

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function ipv6cmd of the file /goform/setIpv6. The manipulation of the argument Ipv6PriDns/Ipv6SecDns/Ipv6StaticGateway/LanIpv6Addr/LanPrefixLen/pppoeUser/pppoePass/pppoeIdleTime/pppoeRedialPeriod/Ipv6in4_PrefixLen/LocalIpv6/RemoteIpv4/LanIPv6_Prefix/LanPrefixLen/ipv6to4Relay/ipv6rdRelay/tunrd_PrefixLen/wan_UseLinkLocal/Ipv6StaticIp/Ipv6PrefixLen leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setDeviceName of the file /goform/setDeviceName. The manipulation of the argument DeviceName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function um_inspect_cross_band of the file /goform/RP_setBasicAuto. The manipulation of the argument staticGateway leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in SkyworkAI DeepResearchAgent up to 08eb7f8eb9505d0094d75bb97ff7dacc3fa3bbf2. Affected is the function from_code/from_dict/from_mcp of the file src/tools/tools.py. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Tenda O3V2 1.0.0.12(3880). This vulnerability affects the function fromNetToolGet of the file /goform/setPingInfo of the component httpd. The manipulation of the argument domain leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.