A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.

Tenda Technology Co.,Ltd HG6 3.3.0-210926 was discovered to contain a command injection vulnerability via the pingAddr and traceAddr parameters. This vulnerability is exploited via a crafted POST request.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

An issue was discovered in SolarWinds N-Central 12.3.0.670. The sudo configuration has incorrect access control because the nable web user account is effectively able to run arbitrary OS commands as root (i.e., the use of root privileges is not limited to specific programs listed in the sudoers file).

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

NETGEAR R6200_V2 firmware versions through R6200v2-V1.0.3.12_10.1.11 and R6300_V2 firmware versions through R6300v2-V1.0.4.52_10.0.93 allow remote authenticated attackers to execute arbitrary command via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameters.

An OS command injection vulnerability exists in the web interface /action/ipcamRecordPost functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

In systeminformation (npm package) before version 4.31.1 there is a command injection vulnerability. The problem was fixed in version 4.31.1 with a shell string sanitation fix.

A remote authenticated command Injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass CLI could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in Cisco Jabber for Windows, Jabber for MacOS, and Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system (OS) with elevated privileges or gain access to sensitive information. For more information about these vulnerabilities, see the Details section of this advisory.

TOTOLINK A3002RU-V2.0.0 B20190814.1034 allows authenticated remote users to modify the system's 'Run Command'. An attacker can use this functionality to execute arbitrary OS commands on the router.

XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14.

The web console for Mimosa B5, B5c, and C5x firmware through 2.8.0.2 allows authenticated command injection in the Throughput, WANStats, PhyStats, and QosStats API classes. An attacker with access to a web console account may execute operating system commands on affected devices by sending crafted POST requests to the affected endpoints (/core/api/calls/Throughput.php, /core/api/calls/WANStats.php, /core/api/calls/PhyStats.php, /core/api/calls/QosStats.php). This results in the complete takeover of the vulnerable device. This vulnerability does not occur in the older 1.5.x firmware versions.

An issue was discovered on Enphase Envoy R3.x and D4.x (and other current) devices. The upgrade_start function in /installer/upgrade_start allows remote authenticated users to execute arbitrary commands via the force parameter.

An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on the target machine. Commands are executed as the root user (uid 0). (Even if a login is required, most routers are left with default credentials.)

An issue was discovered in includes/webconsole.php in RaspAP 2.5. With authenticated access, an attacker can use a misconfigured (and virtually unrestricted) web console to attack the underlying OS (Raspberry Pi) running this software, and execute commands on the system (including ones for uploading of files and execution of code).

Nagios XI 5.7.2 is affected by a remote code execution (RCE) vulnerability. An authenticated user can inject additional commands into normal webapp query.

A system command injection vulnerability in zyshclient in ZyXEL NSA325 V2 version 4.81 allows attackers to execute system commands via the web application API.

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.5.x: 6.5.4.17 and below; Aruba Instant 8.3.x: 8.3.0.13 and below; Aruba Instant 8.5.x: 8.5.0.10 and below; Aruba Instant 8.6.x: 8.6.0.5 and below; Aruba Instant 8.7.x: 8.7.0.0 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

UCOPIA Wi-Fi appliances 6.0.5 allow authenticated remote attackers to escape the restricted administration shell CLI, and access a shell with admin user rights, via an unprotected less command.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to password.cgi.

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

Shanghai Feixun Data Communication Technology Co., Ltd router fir302b A2 was discovered to contain a remote command execution (RCE) vulnerability via the Ping function.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameter.

Atop Technology industrial 3G/4G gateway contains Command Injection vulnerability. Due to insufficient input validation, the device's web management interface allows attackers to inject specific code and execute system commands without privilege.

An OS Command Injection vulnerability in the configuration parser of Eve-NG Professional through 4.0.1-65 and Eve-NG Community through 2.0.3-112 allows a remote authenticated attacker to execute commands as root by editing virtualization command parameters of imported UNL files.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated users to inject and execute arbitrary shell commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

An OS command injection and memory corruption vulnerability in the PAN-OS management web interface that allows authenticated administrators to disrupt system processes and potentially execute arbitrary code and OS commands with root privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

Jenkins CryptoMove Plugin 0.1.33 and earlier allows attackers with Job/Configure access to execute arbitrary OS commands on the Jenkins master as the OS user account running Jenkins.

Privilege escalation of an authenticated user to root in Citrix SD-WAN center versions before 11.2.2, 11.1.2b and 10.2.8.

An OS Command Injection vulnerability in the PAN-OS web management interface allows authenticated administrators to execute arbitrary OS commands with root privileges by sending a malicious request to generate new certificates for use in the PAN-OS configuration. This issue affects: All versions of PAN-OS 8.0; PAN-OS 7.1 versions earlier than PAN-OS 7.1.26; PAN-OS 8.1 versions earlier than PAN-OS 8.1.13.

We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.

Ruckus ZoneFlex R500 104.0.0.0.1347 devices allow an authenticated attacker to execute arbitrary OS commands via the hidden /forms/nslookupHandler form, as demonstrated by the nslookuptarget=|cat${IFS} substring.

Verizon 5G Home LVSKIHP OutDoorUnit (ODU) 3.33.101.0 does not property sanitize user-controlled parameters within the DMACC URLs on the Settings page of the Engineering portal. An authenticated remote attacker on the local network can inject shell metacharacters into /usr/lib/lua/5.1/luci/controller/admin/settings.lua to achieve remote code execution as root.

functions_netflow.php in Artica Pandora FMS 7.0 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the index.php?operation/netflow/nf_live_view ip_dst, dst_port, or src_port parameter, a different vulnerability than CVE-2019-20224.

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

Netis WF2471 v1.2.30142 devices allow an authenticated attacker to execute arbitrary OS commands via shell metacharacters in the /cgi-bin-igd/sys_log_clean.cgi log_3g_type parameter.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.