In Unisys Stealth (core) before 6.0.025.0, the Keycloak password is stored in a recoverable format that might be accessible by a local attacker, who could gain access to the Management Server and change the Stealth configuration.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

The web application stores credentials in clear text in the "admin.xml" file, which can be accessed without logging into the website, which could allow an attacker to obtain credentials related to all users, including admin users, in clear text, and use them to subsequently execute malicious actions.

An inconsistent user interface issue was addressed with improved state management. This issue is fixed in iOS 15.2 and iPadOS 15.2. A person with physical access to an iOS device may be able to access stored passwords without authentication.

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.

A flaw was found in the GNOME Control Center in Red Hat Enterprise Linux 8 versions prior to 8.2, where it improperly uses Red Hat Customer Portal credentials when a user registers a system through the GNOME Settings User Interface. This flaw allows a local attacker to discover the Red Hat Customer Portal password. The highest threat from this vulnerability is to confidentiality.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user account passwords set in clear text could leak to users without any password. This issue affects: Arista Metamako Operating System MOS-0.18 and post releases in the MOS-0.1x train All releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

IBM WebSphere Message Broker stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 123777.

An issue has been discovered in GitLab affecting all versions prior to 13.2.10, 13.3.7 and 13.4.2. Sessions keys are stored in plain-text in Redis which allows attacker with Redis access to authenticate as any user that has a session stored in Redis

Jenkins Build-Publisher plugin version 1.21 and earlier stores credentials to other Jenkins instances in the file hudson.plugins.build_publisher.BuildPublisher.xml in the Jenkins master home directory. These credentials were stored unencrypted, allowing anyone with local file system access to access them. Additionally, the credentials were also transmitted in plain text as part of the configuration form. This could result in exposure of the credentials through browser extensions, cross-site scripting vulnerabilities, and similar situations.

Insufficiently protected credentials in the Intel(R) EMA before version 1.3.3 may allow an authorized user to potentially enable information disclosure via local access.

Insufficiently protected credentialsin subsystem in some Intel(R) Client SSDs and some Intel(R) Data Center SSDs may allow an unauthenticated user to potentially enable information disclosure via physical access.

Ansible before 1.5.5 sets 0644 permissions for sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by reading a file that uses the "deb http://user:pass@server:port/" format.

HCL Launch stores user credentials in plain clear text which can be read by a local user.

eyeDisk implements the unlock feature by sending a cleartext password. The password can be discovered by sniffing USB traffic or by sending a 06 05 52 41 01 b0 00 00 00 00 00 00 SCSI command.

Jenkins GitLab Logo Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins Maven Release Plugin 0.14.0 and earlier stored credentials unencrypted on the Jenkins master where they could be viewed by users with access to the master file system.

Jenkins TraceTronic ECU-TEST Plugin 2.23.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

Tauri is a framework for building binaries for all major desktop platforms. This advisory is not describing a vulnerability in the Tauri code base itself but a commonly used misconfiguration which could lead to leaking of the private key and updater key password into bundled Tauri applications using the Vite frontend in a specific configuration. The Tauri documentation used an insecure example configuration in the `Vite guide` to showcase how to use Tauri together with Vite. Copying the following snippet `envPrefix: ['VITE_', 'TAURI_'],` from this guide into the `vite.config.ts` of a Tauri project leads to bundling the `TAURI_PRIVATE_KEY` and `TAURI_KEY_PASSWORD` into the Vite frontend code and therefore leaking this value to the released Tauri application. Using the `envPrefix: ['VITE_'],` or any other framework than Vite means you are not impacted by this advisory. Users are advised to rotate their updater private key if they are affected by this (requires Tauri CLI >=1.5.5). After updating the envPrefix configuration, generate a new private key with `tauri signer generate`, saving the new private key and updating the updater's `pubkey` value on `tauri.conf.json` with the new public key. To update your existing application, the next application build must be signed with the older private key in order to be accepted by the existing application.

Jenkins Bumblebee HP ALM Plugin 4.1.5 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Easy Hosting Control Panel (EHCP) v0.37.12.b allows attackers to obtain sensitive information by leveraging cleartext password storage.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

Jenkins Nomad Plugin 0.7.4 and earlier stores Docker passwords unencrypted in the global config.xml file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

IBM Security Guardium 11.2 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 195770.

Dell DM5500 5.14.0.0, contain a Plain-text Password Storage Vulnerability in the appliance. A local attacker with privileges could potentially exploit this vulnerability, leading to the disclosure of certain service credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 196346.

CloudForms stores user passwords in recoverable format

A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.

A vulnerability in the storage of proxy server credentials of Cisco Firepower Management Center (FMC) could allow an authenticated, local attacker to view credentials for a configured proxy server. The vulnerability is due to clear-text storage and weak permissions of related configuration files. An attacker could exploit this vulnerability by accessing the CLI of the affected software and viewing the contents of the affected files. A successful exploit could allow the attacker to view the credentials that are used to access the proxy server.

A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.

Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Windows

Insecure Permissions vulnerability in Sichuan Tianyi Kanghe Communication Co., Ltd China Telecom Tianyi Home Gateway v.TEWA-700G allows a local attacker to obtain sensitive information via the default password parameter.

In Vijeo Citect 7.30 and 7.40, and CitectSCADA 7.30 and 7.40, a vulnerability has been identified that may allow an authenticated local user access to Citect user credentials.

In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in a recoverable format, and may be retrieved by any user with access to the PACTware workstation.

Local registry credentials were included directly in the CD4PE deployment definition, which could expose these credentials to users who should not have access to them. This is resolved in Continuous Delivery for Puppet Enterprise 4.0.1.

Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Linux

Claws Mail vCalendar plugin: credentials exposed on interface

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the RiskDB username and password via unprotected log files containing plain text credentials.

Dell EMC Repository Manager version 3.4.0 contains a plain-text password storage vulnerability. A local attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application's database with privileges of the compromised account.

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the ADRMS username and password via unprotected log files containing plain text

Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2.

Under certain conditions SAP Business One (Backup service), versions 9.3, 10.0, allows an attacker with admin permissions to view SYSTEM user password in clear text, leading to Information Disclosure.

MikroTik WinBox 3.22 and below stores the user's cleartext password in the settings.cfg.viw configuration file when the Keep Password field is set and no Master Password is set. Keep Password is set by default and, by default Master Password is not set. An attacker with access to the configuration file can extract a username and password to gain access to the router.

Dell EMC Repository Manager (DRM) version 3.2 contains a plain-text password storage vulnerability. Proxy server user password is stored in a plain text in a local database. A local authenticated malicious user with access to the local file system may use the exposed password to access the with privileges of the compromised user.

IBM Security Guardium Insights 2.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184747.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, and 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184157.