Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, adjacent attacker to bypass authentication and have direct unauthorized access to other vSmart containers. The vulnerability is due to an insecure default configuration of the affected system. An attacker could exploit this vulnerability by directly connecting to the exposed services. An exploit could allow the attacker to retrieve and modify critical system files.

A vulnerability in the memory buffer of Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause memory leaks that could eventually lead to a device reboot. This vulnerability is due to memory leaks caused by multiple clients connecting under specific conditions. An attacker could exploit this vulnerability by causing multiple wireless clients to attempt to connect to an access point (AP) on an affected device. A successful exploit could allow the attacker to cause the affected device to reboot after a significant amount of time, resulting in a denial of service (DoS) condition.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3043, and CVE-2010-3044.

Multiple stack-based buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to use of a function pointer in a callback mechanism.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Buffer overflow in the Overlay Transport Virtualization (OTV) GRE feature in Cisco NX-OS 5.0 through 7.3 on Nexus 7000 and 7700 devices allows remote attackers to execute arbitrary code via long parameters in a packet header, aka Bug ID CSCuy95701.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 1.6.x; Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x; Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x; and Cisco TelePresence Manager 1.2.x, 1.3.x, 1.4.x, 1.5.x, and 1.6.2 allows remote attackers to execute arbitrary code via a crafted Cisco Discovery Protocol packet, aka Bug IDs CSCtd75769, CSCtd75766, CSCtd75754, and CSCtd75761.

A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260.

Cisco IOS 15.0(2)SG5, 15.1(2)SG3, 15.2(1)E, 15.3(3)S, and 15.4(1.13)S allows remote attackers to cause a denial of service (device crash) via a crafted LLDP packet, aka Bug ID CSCun66735.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

A vulnerability in the web application for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to check the bounds of input data. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

The General Packet Radio Switching Tunneling Protocol 1 (aka GTPv1) implementation on Cisco ASR 5000 Packet Data Network Gateway devices before 19.4 allows remote attackers to cause a denial of service (Session Manager process restart) via a crafted GTPv1 packet, aka Bug ID CSCuz46198.

Cisco IOS 15.2(1)T1.11 and 15.2(2)TST allows remote attackers to cause a denial of service (device crash) via a crafted LLDP packet, aka Bug ID CSCun63132.

libclamav in ClamAV (aka Clam AntiVirus), as used in Advanced Malware Protection (AMP) on Cisco Email Security Appliance (ESA) devices before 9.7.0-125 and Web Security Appliance (WSA) devices before 9.0.1-135 and 9.1.x before 9.1.1-041, allows remote attackers to cause a denial of service (AMP process restart) via a crafted document, aka Bug IDs CSCuv78533 and CSCuw60503.

Heap-based buffer overflow in Cisco Unified Computing System (UCS) Platform Emulator 2.5(2)TS4, 3.0(2c)A, and 3.0(2c)TS9 allows local users to gain privileges via crafted libclimeta.so filename arguments, aka Bug ID CSCux68837.

The API in Cisco Prime Infrastructure 1.2 through 3.0 and Evolved Programmable Network Manager (EPNM) 1.2 allows remote attackers to execute arbitrary code or obtain sensitive management information via a crafted HTTP request, as demonstrated by discovering managed-device credentials, aka Bug ID CSCuy10231.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.

The HTTPS inspection engine in the Content Security and Control Security Services Module (CSC-SSM) 6.6 before 6.6.1164.0 for Cisco ASA 5500 devices allows remote attackers to cause a denial of service (memory consumption or device reload) via a flood of HTTPS packets, aka Bug ID CSCue76147.

A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

Cisco Prime Infrastructure 2.2, 3.0, and 3.1(0.0) allows remote authenticated users to read arbitrary files or cause a denial of service via an XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue, aka Bug ID CSCuw81497.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (buffer leak and device crash) via ARP requests that trigger an ARP storm, aka Bug ID CSCte43508.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

Buffer overflow in the login implementation in the Extension Mobility feature in the Unified Communications Manager Express (CME) component in Cisco IOS 12.4XW, 12.4XY, 12.4XZ, and 12.4YA allows remote attackers to execute arbitrary code or cause a denial of service via crafted HTTP requests, aka Bug ID CSCsq58779.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (pbuf exhaustion and device crash) via fragmented traffic, aka Bug ID CSCtd26794.

Buffer overflow in the web server on Cisco DPC2203 and EPC2203 devices with firmware r1_customer_image allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCuv05935.

Stack-based buffer overflow in Cisco WebEx Meeting Center T27LB before SP21 EP3 and T27LC before SP22 allows user-assisted remote authenticated users to execute arbitrary code by providing a crafted .atp file and then disconnecting from a meeting. NOTE: since this is a site-specific issue with no expected action for consumers, it might be REJECTed.

The Active Directory (AD) integration component in Cisco Identity Service Engine (ISE) before 1.2.0.899 patch 7, when AD group-membership authorization is enabled, allows remote attackers to cause a denial of service (authentication outage) via a crafted Password Authentication Protocol (PAP) authentication request, aka Bug ID CSCun25815.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to atas32.dll, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3043.

Stack-based buffer overflow in ataudio.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file.

Buffer overflow in atrpui.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 for Windows, 27.x before 27.10.x for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted WebEx Recording Format (WRF) file.

Buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 for Windows, 27.x before 27.10.x for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted WebEx Recording Format (WRF) file.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2876 and CVE-2009-2878.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2876 and CVE-2009-2879.

Multiple stack-based buffer overflows in agent.exe in Setup Manager in Cisco Intelligent Contact Manager (ICM) before 7.0 allow remote attackers to execute arbitrary code via a long parameter in a (1) HandleUpgradeAll, (2) AgentUpgrade, (3) HandleQueryNodeInfoReq, or (4) HandleUpgradeTrace TCP packet, aka Bug IDs CSCti45698, CSCti45715, CSCti45726, and CSCti46164.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3042, and CVE-2010-3044.

Heap-based buffer overflow in atas32.dll in the Cisco WebEx WRF Player 26.x before 26.49.32 (aka T26SP49EP32) for Windows, 27.x before 27.10.x (aka T27SP10) for Windows, 26.x before 26.49.35 for Mac OS X and Linux, and 27.x before 27.11.8 for Mac OS X and Linux allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted WebEx Recording Format (WRF) file, a different vulnerability than CVE-2009-2878 and CVE-2009-2879.