IBM EntireX 11.1 could allow a local user to obtain sensitive information when a detailed technical error message is returned. This information could be used in further attacks against the system.

The do_check function in kernel/bpf/verifier.c in the Linux kernel before 4.11.1 does not make the allow_ptr_leaks value available for restricting the output of the print_bpf_insn function, which allows local users to obtain sensitive address information via crafted bpf system calls.

The edge_bulk_in_callback function in drivers/usb/serial/io_ti.c in the Linux kernel before 4.10.4 allows local users to obtain sensitive information (in the dmesg ringbuffer and syslog) from uninitialized kernel memory by using a crafted USB device (posing as an io_ti USB serial device) to trigger an integer underflow.

Sensitive information leak through log files. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35433.

The mincore() implementation in mm/mincore.c in the Linux kernel through 4.19.13 allowed local attackers to observe page cache access patterns of other processes on the same system, potentially allowing sniffing of secret information. (Fixing this affects the output of the fincore program.) Limited remote exploitation may be possible, as demonstrated by latency differences in accessing public files from an Apache HTTP Server.

In the Linux kernel, the following vulnerability has been resolved: isofs: Fix out of bound access for corrupted isofs image When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it.

Incorrect error handling in the set_mempolicy and mbind compat syscalls in mm/mempolicy.c in the Linux kernel through 4.10.9 allows local users to obtain sensitive information from uninitialized stack data by triggering failure of a certain bitmap operation.

An issue was discovered in EMC ScaleIO 2.0.1.x. In a Linux environment, one of the support scripts saves the credentials of the ScaleIO MDM user who executed the script in clear text in temporary log files. The temporary files may potentially be read by an unprivileged user with access to the server where the script was executed to recover exposed credentials.

The check_alu_op() function in kernel/bpf/verifier.c in the Linux kernel through v5.16-rc5 did not properly update bounds while handling the mov32 instruction, which allows local users to obtain potentially sensitive address information, aka a "pointer leak."

The time subsystem in the Linux kernel through 4.9.9, when CONFIG_TIMER_STATS is enabled, allows local users to discover real PID values (as distinguished from PID values inside a PID namespace) by reading the /proc/timer_list file, related to the print_timer function in kernel/time/timer_list.c and the __timer_stats_timer_set_start_info function in kernel/time/timer.c.

In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations.

Off-by-one error in the pipe_advance function in lib/iov_iter.c in the Linux kernel before 4.9.5 allows local users to obtain sensitive information from uninitialized heap-memory locations in opportunistic circumstances by reading from a pipe after an incorrect buffer-release decision.

The klsi_105_get_line_state function in drivers/usb/serial/kl5kusb105.c in the Linux kernel before 4.9.5 places uninitialized heap-memory contents into a log entry upon a failure to read the line status, which allows local users to obtain sensitive information by reading the log.

In the Linux kernel, the following vulnerability has been resolved: icmp: change the order of rate limits ICMP messages are ratelimited : After the blamed commits, the two rate limiters are applied in this order: 1) host wide ratelimit (icmp_global_allow()) 2) Per destination ratelimit (inetpeer based) In order to avoid side-channels attacks, we need to apply the per destination check first. This patch makes the following change : 1) icmp_global_allow() checks if the host wide limit is reached. But credits are not yet consumed. This is deferred to 3) 2) The per destination limit is checked/updated. This might add a new node in inetpeer tree. 3) icmp_global_consume() consumes tokens if prior operations succeeded. This means that host wide ratelimit is still effective in keeping inetpeer tree small even under DDOS. As a bonus, I removed icmp_global.lock as the fast path can use a lock-free operation.

A memory leak vulnerability was found in the Linux kernel's eBPF for the Simulated networking device driver in the way user uses BPF for the device such that function nsim_map_alloc_elem being called. A local user could use this flaw to get unauthorized access to some data.

An issue was discovered in drivers/scsi/aacraid/commctrl.c in the Linux kernel before 4.13. There is potential exposure of kernel stack memory because aac_get_hba_info does not initialize the hbainfo structure.

The copy_from_user function in the uaccess code in Linux kernel 2.6 before 2.6.19-rc1, when running on s390, does not properly clear a kernel buffer, which allows local user space programs to read portions of kernel memory by "appending to a file from a bad address," which triggers a fault that prevents the unused memory from being cleared in the kernel buffer.

In the Linux kernel, the following vulnerability has been resolved: mmc: uniphier-sd: Fix a resource leak in the remove function A 'tmio_mmc_host_free()' call is missing in the remove function, in order to balance a 'tmio_mmc_host_alloc()' call in the probe. This is done in the error handling path of the probe, but not in the remove function. Add the missing call.

kernel/bpf/verifier.c in the Linux kernel through 4.14.8 mishandles states_equal comparisons between the pointer data type and the UNKNOWN_VALUE data type, which allows local users to obtain potentially sensitive address information, aka a "pointer leak."

In the Linux kernel, the following vulnerability has been resolved: fs/mount_setattr: always cleanup mount_kattr Make sure that finish_mount_kattr() is called after mount_kattr was succesfully built in both the success and failure case to prevent leaking any references we took when we built it. We returned early if path lookup failed thereby risking to leak an additional reference we took when building mount_kattr when an idmapped mount was requested.

The timer_create syscall implementation in kernel/time/posix-timers.c in the Linux kernel before 4.14.8 doesn't properly validate the sigevent->sigev_notify field, which leads to out-of-bounds access in the show_timer function (called when /proc/$PID/timers is read). This allows userspace applications to read arbitrary kernel memory (on a kernel built with CONFIG_POSIX_TIMERS and CONFIG_CHECKPOINT_RESTORE).

The walk_hugetlb_range function in mm/pagewalk.c in the Linux kernel before 4.14.2 mishandles holes in hugetlb ranges, which allows local users to obtain sensitive information from uninitialized kernel memory via crafted use of the mincore() system call.

The report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect C library function for copying strings, which allows local users to obtain sensitive information from kernel stack memory by leveraging the CAP_NET_ADMIN capability.

The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect length value during a copy operation, which allows local users to obtain sensitive information from kernel memory by leveraging the CAP_NET_ADMIN capability.

A data leak flaw was found in the way XFS_IOC_ALLOCSP IOCTL in the XFS filesystem allowed for size increase of files with unaligned size. A local attacker could use this flaw to leak data on the XFS filesystem otherwise not accessible to them.

The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 does not initialize certain structure members, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability.

The __block_prepare_write function in fs/buffer.c for Linux kernel 2.6.x before 2.6.13 does not properly clear buffers during certain error conditions, which allows local users to read portions of files that have been unlinked.

The fill_event_metadata function in fs/notify/fanotify/fanotify_user.c in the Linux kernel through 3.9.4 does not initialize a certain structure member, which allows local users to obtain sensitive information from kernel memory via a read operation on the fanotify descriptor.

The mmc_ioctl_cdrom_read_data function in drivers/cdrom/cdrom.c in the Linux kernel through 3.10 allows local users to obtain sensitive information from kernel memory via a read operation on a malfunctioning CD-ROM drive.

The HP Smart Array controller disk-array driver and Compaq SMART2 controller disk-array driver in the Linux kernel through 3.9.4 do not initialize certain data structures, which allows local users to obtain sensitive information from kernel memory via (1) a crafted IDAGETPCIINFO command for a /dev/ida device, related to the ida_locked_ioctl function in drivers/block/cpqarray.c or (2) a crafted CCISS_PASSTHRU32 command for a /dev/cciss device, related to the cciss_ioctl32_passthru function in drivers/block/cciss.c.

In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).

In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

The sg_ioctl function in drivers/scsi/sg.c in the Linux kernel before 4.13.4 allows local users to obtain sensitive information from uninitialized kernel heap-memory locations via an SG_GET_REQUEST_TABLE ioctl call for /dev/sg0.

net/xfrm/xfrm_user.c in the Linux kernel before 3.6 does not verify that the actual Netlink message length is consistent with a certain header field, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability and providing a (1) new or (2) updated state.

net/netfilter/nf_conntrack_standalone.c in the Linux kernel before 5.12.2 allows observation of changes in any net namespace because these changes are leaked into all other net namespaces. This is related to the NF_SYSCTL_CT_MAX, NF_SYSCTL_CT_EXPECT_MAX, and NF_SYSCTL_CT_BUCKETS sysctls.

IBM MQ 7.5, 8.0, 9.0 LTS, 9.1 CD, and 9.1 LTS stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 211403.

The load_script function in fs/binfmt_script.c in the Linux kernel before 3.7.2 does not properly handle recursion, which allows local users to obtain sensitive information from kernel stack memory via a crafted application.

pep_sock_accept in net/phonet/pep.c in the Linux kernel through 5.15.8 has a refcount leak.

Directory traversal vulnerability in CIFS in Linux 2.6.16 and earlier allows local users to escape chroot restrictions for an SMB-mounted filesystem via "..\\" sequences, a similar vulnerability to CVE-2006-1864.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 131853.

net/ipv4/af_inet.c in Linux kernel 2.4 does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the (1) getsockname, (2) getpeername, and (3) accept functions, which allows local users to obtain portions of potentially sensitive memory.

The rds_recvmsg function in net/rds/recv.c in the Linux kernel before 3.0.44 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a (1) recvfrom or (2) recvmsg system call on an RDS socket.

The Linux kernel before 2.6.16.9 and the FreeBSD kernel, when running on AMD64 and other 7th and 8th generation AuthenticAMD processors, only save/restore the FOP, FIP, and FDP x87 registers in FXSAVE/FXRSTOR when an exception is pending, which allows one process to determine portions of the state of floating point instructions of other processes, which can be leveraged to obtain sensitive information such as cryptographic keys. NOTE: this is the documented behavior of AMD64 processors, but it is inconsistent with Intel processors in a security-relevant fashion that was not addressed by the kernels.

net/ipv4/netfilter/ip_conntrack_core.c in Linux kernel 2.4 and 2.6, and possibly net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c in 2.6, does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the getsockopt function with SO_ORIGINAL_DST, which allows local users to obtain portions of potentially sensitive memory.

A flaw was found in the Linux kernel's OverlayFS subsystem in the way the user mounts the TmpFS filesystem with OverlayFS. This flaw allows a local user to gain access to hidden files that should not be accessible.

dm-crypt in Linux kernel 2.6.15 and earlier does not clear a structure before it is freed, which leads to a memory disclosure that could allow local users to obtain sensitive information about a cryptographic key.

The atyfb_ioctl function in drivers/video/fbdev/aty/atyfb_base.c in the Linux kernel through 4.12.10 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory by reading locations associated with padding bytes.

drm.c in Linux kernel 2.6.10 to 2.6.13 creates a debug file in sysfs with world-readable and world-writable permissions, which allows local users to enable DRM debugging and obtain sensitive information.

A vulnerability was found in the Linux kernel in versions prior to v5.14-rc1. Missing size validations on inbound SCTP packets may allow the kernel to read uninitialized memory.