In Mahara 21.04 before 21.04.3 and 21.10 before 21.10.1, portfolios created in groups that have not been shared with non-group members and portfolios created on the site and institution levels can be viewed without requiring a login if the URL to these portfolios is known.

In versions 3.0.0-3.5.0, 2.0.0-2.9.0, and 1.0.1, the Neural Autonomic Transport System (NATS) messaging services in use by the NGINX Controller do not require any form of authentication, so any successful connection would be authorized.

A ZTE product is impacted by the improper access control vulnerability. Due to lack of an authentication protection mechanism in the program, attackers could use this vulnerability to gain access right through brute-force attacks. This affects: <ZXONE 19700 SNPE><ZXONE8700V1.40R2B13_SNPE>

SAP Solution Manager (Diagnostics Agent), version 7.2, does not perform the authentication check for the functionalities of the Collector Simulator, leading to Missing Authentication.

An attacker could send an HTTP request to an Open5GS endpoint and retrieve the information stored on the device due to the lack of Authentication.

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The wireless network password is exposed in a QR encoded picture that an unauthenticated adversary can download via the web-management interface.

A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Spectrum Protect Plus 10.1.0 through 10.1.6 may allow unauthenticated and unauthorized access to VDAP proxy which can result in an attacker obtaining information they are not authorized to access. IBM X-Force ID: 193658.

A vulnerability was found in eGauge EG3000 Energy Monitor 3.6.3. It has been classified as problematic. This affects an unknown part of the component Setting Handler. The manipulation leads to missing authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

MachineSense devices use unauthenticated MQTT messaging to monitor devices and remote viewing of sensor data by users.

A vulnerability was found in Papendorf SOL Connect Center 3.3.0.0 and classified as problematic. Affected by this issue is some unknown functionality of the component Web Interface. The manipulation leads to missing authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An authentication bypass vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user to execute certain IPMI calls that could lead to exposure of limited system information.

The WPQA Builder WordPress plugin before 5.5 which is a companion to the Discy and Himer , lacks authentication in a REST API endpoint, allowing unauthenticated users to discover private questions sent between users on the site.

A vulnerability in the API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to view sensitive information on an affected system. The vulnerability exists because the affected software does not properly authenticate API calls. An attacker could exploit this vulnerability by sending API requests to an affected system. A successful exploit could allow the attacker to view sensitive information on the affected system, including information about the devices that the system manages, without authentication.

Zoho ManageEngine ServiceDesk Plus before 13001 allows anyone to know the organisation's default currency name.

The Visual Form Builder WordPress plugin before 3.0.6 does not perform access control on entry form export, allowing unauthenticated users to see the form entries or export it as a CSV File using the vfb-export endpoint.

A vulnerability in the Java Remote Method Invocation (RMI) interface of Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because certain RMI listeners are not properly authenticated. An attacker could exploit this vulnerability by sending a crafted request to the affected listener. A successful exploit could allow the attacker to access sensitive information on an affected device.

An issue was discovered on Libre Wireless LS9 LS1.5/p7040 devices. There is a luci_service GETPASS Configuration Password Information Leak. The luci_service daemon running on port 7777 does not require authentication to return the device configuration password in cleartext when using the GETPASS command. As such, any unauthenticated person with access to port 7777 on the device will be able to leak the user's personal device configuration password by issuing the GETPASS command.

antd-admin 5.5.0 is affected by an incorrect access control vulnerability. Unauthorized access to some interfaces in the foreground leads to leakage of sensitive information.

The memory management module has the logic bypass vulnerability. Successful exploitation of this vulnerability may affect data confidentiality.

An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. Attackers can discover cleartext web-server credentials via certain /opt/lighttpd/web/cgi/ requests.

ironic-image is a container image to run OpenStack Ironic as part of Metal³. Prior to version capm3-v1.4.3, if Ironic is not deployed with TLS and it does not have API and Conductor split into separate services, access to the API is not protected by any authentication. Ironic API is also listening in host network. In case the node is not behind a firewall, the API could be accessed by anyone via network without authentication. By default, Ironic API in Metal3 is protected by TLS and basic authentication, so this vulnerability requires operator to configure API without TLS for it to be vulnerable. TLS and authentication however should not be coupled as they are in versions prior to capm3-v1.4.3. A patch exists in versions capm3-v1.4.3 and newer. Some workarounds are available. Either configure TLS for Ironic API (`deploy.sh -t ...`, `IRONIC_TLS_SETUP=true`) or split Ironic API and Conductor via configuration change (old implementation, not recommended). With both workarounds, services are configured with httpd front-end, which has proper authentication configuration in place.

An improper webserver configuration on Plum IK-401 devices with firmware before 1.02 allows an attacker (with network access to the device) to obtain the configuration file, including hashed credential data. Successful exploitation could allow access to hashed credential data with a single unauthenticated GET request.

OpenClinic version 0.8.2 is affected by a missing authentication vulnerability that allows unauthenticated users to access any patient's medical test results, possibly resulting in disclosure of Protected Health Information (PHI) stored in the application, via a direct request for the /tests/ URI.

SonarQube 8.4.2.36762 allows remote attackers to discover cleartext SMTP, SVN, and GitLab credentials via the api/settings/values URI. NOTE: reportedly, the vendor's position for SMTP and SVN is "it is the administrator's responsibility to configure it.

A vulnerability is in the 'BRS_top.html' page of the Netgear W104, version WAC104-V1.0.4.13, which can allow a remote attacker to access this page without any authentication. When processed, it exposes firmware version information for the device.

A vulnerability is in the 'live_mfg.html' page of the WAVLINK AC1200, version WAVLINK-A42W-1.27.6-20180418, which can allow a remote attacker to access this page without any authentication. When processed, it exposes some key information of the manager of router.

The wp-courses plugin through 2.0.27 for WordPress allows remote attackers to bypass the intended payment step (for course videos and materials) by using the /wp-json REST API, as exploited in the wild in September 2020. This occurs because show_in_rest is enabled for custom post types (e.g., /wp-json/wp/v2/course and /wp-json/wp/v2/lesson exist).

BigAnt Software BigAnt Server v5.6.06 was discovered to contain incorrect access control.

An issue was discovered where a page is exposed that has the current administrator password in cleartext in the source code of the page. No authentication is required in order to reach the page (a certain live_?.shtml page with the variable syspasswd). Affected Devices: Wavlink WN530HG4, Wavlink WN531G3, and Wavlink WN572HG3

In TOTOLINK EX1200T V4.1.2cu.5215, an attacker can obtain sensitive information (wifikey, etc.) without authorization through getSysStatusCfg.

Smartwares HOME easy <=1.0.9 is vulnerable to an unauthenticated database backup download and information disclosure vulnerability. An attacker could disclose sensitive and clear-text information resulting in authentication bypass, session hijacking and full system control.

An issue in HNAP1/GetMultipleHNAPs of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to access the components GetStationSettings, GetWebsiteFilterSettings and GetNetworkSettings without authentication.

White Shark System (WSS) 1.3.2 has a sensitive information disclosure vulnerability. The if_get_addbook.php file does not have an authentication operation. Remote attackers can obtain username information for all users of the current site.

An issue was discovered in Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n where authentication to download the Syslog could be bypassed.

In TOTOLINK EX1200T V4.1.2cu.5215, an attacker can obtain sensitive information (wifikey, etc.) without authorization.

The S3 buckets and keys in a secure Apache Ozone Cluster must be inaccessible to anonymous access by default. The current security vulnerability allows access to keys and buckets through a curl command or an unauthenticated HTTP request. This enables unauthorized access to buckets and keys thereby exposing data to anonymous clients or users. This affected Apache Ozone prior to the 1.1.0 release.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. By default, SIP requests of the type SUBSCRIBE are not authenticated in the affected versions of FreeSWITCH. Abuse of this security issue allows attackers to subscribe to user agent event notifications without the need to authenticate. This abuse poses privacy concerns and might lead to social engineering or similar attacks. For example, attackers may be able to monitor the status of target SIP extensions. Although this issue was fixed in version v1.10.6, installations upgraded to the fixed version of FreeSWITCH from an older version, may still be vulnerable if the configuration is not updated accordingly. Software upgrades do not update the configuration by default. SIP SUBSCRIBE messages should be authenticated by default so that FreeSWITCH administrators do not need to explicitly set the `auth-subscriptions` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

Incorrect Access Control in Emerson Smart Wireless Gateway 1420 4.6.59 allows remote attackers to obtain sensitive device information from the administrator console without authentication.

The Popup by Supsystic WordPress plugin before 1.10.9 does not have any authentication and authorisation in an AJAX action, allowing unauthenticated attackers to call it and get the email addresses of subscribed users

OpenVPN 2.5.1 and earlier versions allows a remote attackers to bypass authentication and access control channel data on servers configured with deferred authentication, which can be used to potentially trigger further information leaks.

Advantech iView, versions 5.6 and prior, has an improper authentication for critical function (CWE-306) issue. Successful exploitation of this vulnerability may allow an attacker to obtain the information of the user table, including the administrator credentials in plain text. An attacker may also delete the administrator account.

Sensitive information can be obtained through the handling of serialized data. The issue results from the lack of proper authentication required to query the server

An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.0.8-std devices. Authentication is not required to download the support file that contains sensitive information such as cleartext credentials and password hashes.

A vulnerability is in the 'MNU_top.htm' page of the Netgear W104, version WAC104-V1.0.4.13, which can allow a remote attacker to access this page without any authentication. When processed, it exposes some key information for the device.

userfiles/modules/users/controller/controller.php in Microweber before 1.1.20 allows an unauthenticated user to disclose the users database via a /modules/ POST request.

Veritas APTARE versions prior to 10.4 allowed sensitive information to be accessible without authentication.

An information disclosure vulnerability in the /cgi-bin/ExportAllSettings.sh endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to leak router settings, including cleartext login details, DNS settings, and other sensitive information without authentication.

Zoho ManageEngine OpManager before 125120 allows an unauthenticated user to retrieve an API key via a servlet call.

In TOTOLINK EX1200T V4.1.2cu.5215, an attacker can obtain sensitive information (wifikey, wifiname, etc.) without authorization.