NSA Ghidra before 9.0.2 is vulnerable to DLL hijacking because it loads jansi.dll from the current working directory.

Untrusted search path vulnerability in Amazon Kindle for PC before 1.19 allows local users to execute arbitrary code and conduct DLL hijacking attacks via a Trojan horse DLL in the current working directory of the Kindle Setup installer.

A potential vulnerability was reported in Lenovo System Interface Foundation versions before v1.1.18.3 that could allow an administrative user to load an unsigned DLL.

Trend Micro Endpoint Sensor 1.6 before b1290 has a DLL hijacking vulnerability that allows remote attackers to execute arbitrary code, aka Trend Micro Vulnerability Identifier 2015-0208.

Rapid7 AppSpider Pro installers prior to version 6.14.053 contain a DLL preloading vulnerability, wherein it is possible for the installer to load a malicious DLL located in the current working directory of the installer.

An untrusted search path vulnerability was found in Yarn. When a victim runs certain Yarn commands in a directory with attacker-controlled content, malicious commands could be executed in unexpected ways.

Untrusted search path vulnerability in installers for The Public Certification Service for Individuals "The JPKI user's software (for Windows 7 and later)" Ver3.1 and earlier, The Public Certification Service for Individuals "The JPKI user's software (for Windows Vista)", The Public Certification Service for Individuals "The JPKI user's software" Ver2.6 and earlier that were available until April 27, 2017 allows remote attackers to gain privileges via a Trojan horse DLL in an unspecified directory.

Untrusted search path vulnerability in STAMP Workbench installer all versions allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

An issue was discovered in IDM UltraEdit through 24.10.0.32. To exploit the vulnerability, on unpatched Windows systems, an attacker could include in the same directory as the affected executable a DLL using the name of a Windows DLL. This DLL must be preloaded by the executable (for example, "ntmarta.dll"). When the installer EXE is executed by the user, the DLL located in the EXE's current directory will be loaded instead of the Windows DLL, allowing the attacker to run arbitrary code on the affected system.

Potplayer prior to 1.5.39659: DLL Loading Arbitrary Code Execution Vulnerability

The Rapid7 InsightAppSec broker suffers from a DLL injection vulnerability in the 'prunsrv.exe' component of the product. If exploited, a local user of the system (who must already be authenticated to the operating system) can elevate their privileges with this vulnerability to the privilege level of InsightAppSec (usually, SYSTEM). This issue affects version 2019.06.24 and prior versions of the product.

Nitro PDF 8.5.0.26: A specially crafted DLL file can facilitate Arbitrary Code Execution

A Code Execution Vulnerability exists in UMPlayer 0.98 in wintab32.dll due to insufficient path restrictions when loading external libraries. which could let a malicious user execute arbitrary code.

Untrusted search path in FileZilla before 3.41.0-rc1 allows an attacker to gain privileges via a malicious 'fzsftp' binary in the user's home directory.

An issue was discovered in Foxit Studio Photo before 3.6.6.922. It allows local users to gain privileges via a crafted DLL in the current working directory.

Path settings in HMIStudio component of ABB PB610 Panel Builder 600 versions 2.8.0.424 and earlier accept DLLs outside of the program directory, potentially allowing an attacker with access to the local file system the execution of code in the application’s context.

Microsoft Office Remote Code Execution Vulnerability

Dimension versions 3.4.11 and earlier are affected by an Untrusted Search Path vulnerability that could lead to arbitrary code execution. An attacker could exploit this vulnerability by inserting a malicious file into the search path, which the application might execute instead of the legitimate file. This could occur if the application uses a search path to locate executables or libraries. Exploitation of this issue requires user interaction.

The Nextcloud Desktop Client is a tool to synchronize files from Nextcloud Server with a computer. The Nextcloud Desktop Client invokes its uninstaller script when being installed to make sure there are no remnants of previous installations. In versions 3.0.3 through 3.2.4, the Client searches the `Uninstall.exe` file in a folder that can be written by regular users. This could lead to a case where a malicious user creates a malicious `Uninstall.exe`, which would be executed with administrative privileges on the Nextcloud Desktop Client installation. This issue is fixed in Nextcloud Desktop Client version 3.3.0. As a workaround, do not allow untrusted users to create content in the `C:\` system folder and verify that there is no malicious `C:\Uninstall.exe` file on the system.

SupportAssist Client version 3.8 and 3.9 contains an Untrusted search path vulnerability that allows attackers to load an arbitrary .dll file via .dll planting/hijacking, only by a separate administrative action that is not a default part of the SOSInstallerTool.exe installation for executing arbitrary dll's,

Uncontrolled search path in the Intel(R) RealSense(TM) D400 Series UWP driver for Windows 10 before version 6.1.160.22 may allow an authenticated user to potentially enable escalation of privilege via local access.

Beijing Feishu Technology Co., Ltd Feishu v3.40.3 was discovered to contain an untrusted search path vulnerability.

In ListCheck.exe in Acer Care Center 4.x before 4.00.3038, a vulnerability in the loading mechanism of Windows DLLs could allow a local attacker to perform a DLL hijacking attack. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with local administrator privileges.

A untrusted search path in Fortinet FortiClientWindows versions 7.4.0, versions 7.2.4 through 7.2.0, versions 7.0.12 through 7.0.0 allows an attacker to run arbitrary code via DLL hijacking and social engineering.

GalaxyClient version 2.0.28.9 loads unsigned DLLs such as zlib1.dll, libgcc_s_dw2-1.dll and libwinpthread-1.dll from PATH, which allows an attacker to potentially run code locally through unsigned DLL loading.

The OpenSSL component of the Teradici PCoIP Software Client prior to version 21.07.0 was compiled without the no-autoload-config option, which allowed an attacker to elevate to the privileges of the running process via placing a specially crafted dll in a build configuration directory.

When Octopus Tentacle is installed using a custom folder location, folder ACLs are not set correctly and could lead to an unprivileged user using DLL side-loading to gain privileged access.

When Octopus Server is installed using a custom folder location, folder ACLs are not set correctly and could lead to an unprivileged user using DLL side-loading to gain privileged access.

Foxit PDF Compressor installers from versions from 7.0.0.183 to 7.7.2.10 contain a DLL preloading vulnerability, wherein it is possible for the installer to load a malicious DLL located in the current working directory of the installer.

In Edge Client version 7.2.x before 7.2.1.1, 7.1.9.x before 7.1.9.8, and 7.1.x-7.1.8.x before 7.1.8.5, an untrusted search path vulnerability in the BIG-IP APM Client Troubleshooting Utility (CTU) for Windows could allow an attacker to load a malicious DLL library from its current directory. User interaction is required to exploit this vulnerability in that the victim must run this utility on the Windows system. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

IBM DB2 High Performance Unload load for LUW 6.1 and 6.5 could allow a local attacker to execute arbitrary code on the system, caused by an untrusted search path vulnerability. By using a executable file, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 168298.

GitPython is a python library used to interact with Git repositories. There is an incomplete fix for CVE-2023-40590. On Windows, GitPython uses an untrusted search path if it uses a shell to run `git`, as well as when it runs `bash.exe` to interpret hooks. If either of those features are used on Windows, a malicious `git.exe` or `bash.exe` may be run from an untrusted repository. This issue has been patched in version 3.1.41.

Lightroom Desktop versions 7.1.2 and earlier are affected by an Untrusted Search Path vulnerability that could result in arbitrary code execution in the context of the current user. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Microsoft Printer Metadata Troubleshooter Tool Remote Code Execution Vulnerability

Dashlane might allow local users to gain privileges by placing a Trojan horse WINHTTP.dll in the %APPDATA%\Dashlane directory.

InternetSoft FTP Commander 8.02 and prior has an untrusted search path, allowing DLL hijacking via a Trojan horse dwmapi.dll file.

Adobe ColdFusion 2016 update 15 and earlier versions, and ColdFusion 2018 update 9 and earlier versions have a dll search-order hijacking vulnerability. Successful exploitation could lead to privilege escalation.

Untrusted Search Path vulnerability in the windows installer of Google Earth Pro versions prior to 7.3.3 allows an attacker to insert malicious local files to execute unauthenticated remote code on the targeted system.

A untrusted search path vulnerability in Fortinet FortiClientWindows 7.0.9 allows an attacker to perform a DLL Hijack attack via a malicious OpenSSL engine library in the search path.

DLL Search Order Hijacking Vulnerability in the installer component of McAfee Host Intrusion Prevention System (Host IPS) for Windows prior to 8.0.0 Patch 15 Update allows attackers with local access to execute arbitrary code via execution from a compromised folder.

A DLL Hijacking vulnerability in Eaton's 9000x Programming and Configuration Software v 2.0.38 and prior allows an attacker to execute arbitrary code by replacing the required DLLs with malicious DLLs when the software try to load vci11un6.DLL and cinpl.DLL.

Trend Micro Anti-Threat Toolkit (ATTK) versions 1.62.0.1218 and below have a vulnerability that may allow an attacker to place malicious files in the same directory, potentially leading to arbitrary remote code execution (RCE) when executed. Another attack vector similar to CVE-2019-9491 was idenitfied and resolved in version 1.62.0.1228 of the tool.

An Untrusted Search Path vulnerability in Malwarebytes AdwCleaner before 8.0.1 could cause arbitrary code execution with SYSTEM privileges when a malicious DLL library is loaded by the product.

Goverlan Reach Console before 9.50, Goverlan Reach Server before 3.50, and Goverlan Client Agent before 9.20.50 have an Untrusted Search Path that leads to Command Injection and Local Privilege Escalation via DLL hijacking.

Untrusted search path vulnerability in Installers of ART EX Driver for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 12 Apr 2017 02:04 UTC.), PostScript? Driver + Additional Feature Plug-in + PPD File for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 12 Apr 2017 02:10 UTC.), XPS Print Driver for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 3 Nov 2017 23:48 UTC.), ART EX Direct FAX Driver for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 26 May 2017 07:44 UTC.), Setting Restore Tool for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 25 Aug 2015 08:51 UTC.) allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

NVIDIA GeForce Experience, all versions prior to 3.20.5.70, contains a vulnerability in NVIDIA Web Helper NodeJS Web Server in which an uncontrolled search path is used to load a node module, which may lead to code execution, denial of service, escalation of privileges, and information disclosure.

An Untrusted Search Path vulnerability in bdserviceshost.exe as used in Bitdefender Total Security 2020 allows an attacker to execute arbitrary code. This issue does not affect: Bitdefender Total Security versions prior to 24.0.12.69.

An Untrusted Search Path vulnerability in EPSecurityService.exe as used in Bitdefender Endpoint Security Tools versions prior to 6.6.11.163 allows an attacker to load an arbitrary DLL file from the search path. This issue affects: Bitdefender EPSecurityService.exe versions prior to 6.6.11.163.

GitPython is a python library used to interact with Git repositories. When resolving a program, Python/Windows look for the current working directory, and after that the PATH environment. GitPython defaults to use the `git` command, if a user runs GitPython from a repo has a `git.exe` or `git` executable, that program will be run instead of the one in the user's `PATH`. This is more of a problem on how Python interacts with Windows systems, Linux and any other OS aren't affected by this. But probably people using GitPython usually run it from the CWD of a repo. An attacker can trick a user to download a repository with a malicious `git` executable, if the user runs/imports GitPython from that directory, it allows the attacker to run any arbitrary commands. There is no fix currently available for windows users, however there are a few mitigations. 1: Default to an absolute path for the git program on Windows, like `C:\\Program Files\\Git\\cmd\\git.EXE` (default git path installation). 2: Require users to set the `GIT_PYTHON_GIT_EXECUTABLE` environment variable on Windows systems. 3: Make this problem prominent in the documentation and advise users to never run GitPython from an untrusted repo, or set the `GIT_PYTHON_GIT_EXECUTABLE` env var to an absolute path. 4: Resolve the executable manually by only looking into the `PATH` environment variable.

Trend Micro Security (Consumer) 2020 (v16.0.1221 and below) is affected by a DLL hijacking vulnerability that could allow an attacker to use a specific service as an execution and/or persistence mechanism which could execute a malicious program each time the service is started.