Eximious Logo Designer 3.82 has a User Mode Write AV starting at ExiVectorRender!StrokeText_Blend+0x00000000000003a7.

Eximious Logo Designer 3.82 has a User Mode Write AV starting at ExiCustomPathLib!ExiCustomPathLib::CGradientColorsProfile::BuildGradientColorsTable+0x0000000000000053.

In wcn bsp driver, there is a possible out of bounds write due to a missing bounds check.This could lead to local denial of service with no additional execution privileges

Out-of-bounds write in accessing uninitialized memory in libsavsvc.so prior to Android 15 allows local attackers to cause memory corruption.

Out-of-bounds write in libsavscmn prior to Android 15 allows local attackers to cause memory corruption.

Stack-based buffer overflow in hw/scsi/scsi-bus.c in QEMU, when built with SCSI-device emulation support, allows guest OS users with CAP_SYS_RAWIO permissions to cause a denial of service (instance crash) via an invalid opcode in a SCSI command descriptor block.

A vulnerability was found in the libtiff library. This security flaw causes a heap buffer overflow in extractContigSamples32bits, tiffcrop.c.

Buffer Overflow vulnerability found in Libtiff V.4.0.7 allows a local attacker to cause a denial of service via the tiffcp function in tiffcp.c.

Stack out-of-bounds write vulnerability in IpcRxImeiUpdateImeiNoti of RILD priro to SMR Jul-2023 Release 1 cause a denial of service on the system.

A security vulnerability has been detected in Mapnik up to 4.2.0. This issue affects the function mapnik::dbf_file::string_value of the file plugins/input/shape/dbfile.cpp. Such manipulation leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

IBM Informix Dynamic Server 12.10 and 14.10 cdr is vulnerable to a heap buffer overflow, caused by improper bounds checking which could allow a local user to cause a segmentation fault. IBM X-Force ID: 251206.

IBM Informix Dynamic Server 12.10 and 14.10 archecker is vulnerable to a heap buffer overflow, caused by improper bounds checking which could allow a local user to cause a segmentation fault. IBM X-Force ID: 251204.

Out-of-bounds write in firmware for some Intel(R) NUCs may allow an authenticated user to potentially enable denial of service via local access.

A weakness has been identified in BYVoid OpenCC up to 1.1.9. This vulnerability affects the function opencc::MaxMatchSegmentation of the file src/MaxMatchSegmentation.cpp. This manipulation causes heap-based buffer overflow. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. Patch name: 345c9a50ab07018f1b4439776bad78a0d40778ec. To fix this issue, it is recommended to deploy a patch.

TensorFlow is an end-to-end open source platform for machine learning. The implementation of `tf.raw_ops.ReverseSequence` allows for stack overflow and/or `CHECK`-fail based denial of service. The implementation(https://github.com/tensorflow/tensorflow/blob/5b3b071975e01f0d250c928b2a8f901cd53b90a7/tensorflow/core/kernels/reverse_sequence_op.cc#L114-L118) fails to validate that `seq_dim` and `batch_dim` arguments are valid. Negative values for `seq_dim` can result in stack overflow or `CHECK`-failure, depending on the version of Eigen code used to implement the operation. Similar behavior can be exhibited by invalid values of `batch_dim`. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

Out-of-bounds write in some Intel(R) Arc(TM) Control software before version 1.73.5335.2 may allow an authenticated user to potentially enable denial of service via local access.

FTPShell Server 6.83 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying an excessively long string in the account name field. Attackers can trigger a denial of service by pasting a 417-byte payload into the 'Account name to ban' parameter within the Manage FTP Accounts interface.

AnyBurn 4.3 contains a local buffer overflow vulnerability that allows local attackers to crash the application by supplying an excessively long string in the image file name field. Attackers can paste a 10000-byte payload into the 'Image file name' parameter during the 'Copy disk to Image' operation to trigger a denial of service condition.

NetworkActiv Web Server 4.0 contains a buffer overflow vulnerability in the username field of the Security options that allows local attackers to crash the application by supplying an excessively long string. Attackers can trigger a denial of service by entering a crafted username value exceeding the expected buffer size through the Set username interface.

FTP Voyager 16.2.0 contains a denial of service vulnerability that allows local attackers to crash the application by injecting oversized buffer data into the site profile IP field. Attackers can create a malicious site profile containing 500 bytes of repeated characters and paste it into the IP field to trigger a buffer overflow that crashes the FTP Voyager process.

Textpad 8.1.2 contains a denial of service vulnerability that allows local attackers to crash the application by supplying an excessively long buffer string through the Run command interface. Attackers can paste a 5000-byte payload into the Command field via Tools > Run to trigger a buffer overflow that crashes the application.

Excel Password Recovery Professional 8.2.0.0 contains a local buffer overflow vulnerability that allows attackers to cause a denial of service by supplying an excessively long string to the 'E-Mail and Registrations Code' field. Attackers can paste a crafted payload containing 5000 bytes of data into the registration field to trigger a crash when the Register button is clicked.

MegaPing contains a local buffer overflow vulnerability that allows local attackers to crash the application by supplying an oversized payload to the Destination Address List field in the Finger function. Attackers can paste a crafted buffer exceeding expected input limits into the vulnerable field and trigger the Start button to cause a denial of service crash.

Termite 3.4 contains a buffer overflow vulnerability in the User interface language settings field that allows local attackers to cause a denial of service by supplying an excessively long string. Attackers can paste a 2000-byte payload into the Settings User interface language field to crash the application.

UltraISO 9.7.1.3519 contains a local buffer overflow vulnerability in the Output FileName field of the Make CD/DVD Image dialog that allows attackers to overwrite SEH and SE handler records. Attackers can craft a malicious filename string with 304 bytes of data followed by SEH record overwrite values and paste it into the Output FileName field to trigger a denial of service crash.

Angry IP Scanner for Linux 3.5.3 contains a denial of service vulnerability that allows local attackers to crash the application by supplying malformed input to the port selection field. Attackers can craft a malicious string containing buffer overflow patterns and paste it into the Preferences Ports tab to trigger an application crash.

Angry IP Scanner 3.5.3 contains a buffer overflow vulnerability in the preferences dialog that allows local attackers to crash the application by supplying an excessively large string. Attackers can generate a file containing a massive buffer of repeated characters and paste it into the unavailable value field in the display preferences to trigger a denial of service.

NetSetMan 4.7.1 contains a buffer overflow vulnerability in the Workgroup feature that allows local attackers to crash the application by supplying oversized input. Attackers can create a malicious configuration file with excessive data and paste it into the Workgroup field to trigger a denial of service condition.

A vulnerability, which was classified as problematic, has been found in code-projects Police FIR Record Management System 1.0. This issue affects some unknown processing of the component Add Record Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used.

The pnv_lpc_do_eccb function in hw/ppc/pnv_lpc.c in Qemu before 3.1 allows out-of-bounds write or read access to PowerNV memory.

VMware Workstation (15.x) and Horizon Client for Windows (5.x before 5.4.4) contain a denial of service vulnerability due to an out-of-bounds write issue in Cortado ThinPrint component. A malicious actor with normal access to a virtual machine may be able to exploit this issue to create a partial denial-of-service condition on the system where Workstation or Horizon Client for Windows is installed. Exploitation is only possible if virtual printing has been enabled. This feature is not enabled by default on Workstation but it is enabled by default on Horizon Client.

IBM Spectrum Protect Client 8.1.0.0 through 8.1.11.0 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. A local attacker could overflow a buffer and cause the application to crash. IBM X-Force ID: 198934

An out-of-bounds write in the engine module in AVG/Avast Antivirus signature <24092400 released on 24/Sep/2024 on MacOS allows a malformed Mach-O file to crash the application during file processing.

AsIO2_64.sys and AsIO2_32.sys in ASUS GPUTweak II before 2.3.0.3 allow low-privileged users to trigger a stack-based buffer overflow. This could enable low-privileged users to achieve Denial of Service via a DeviceIoControl.

An out-of-bounds write in the engine module in AVG/Avast Antivirus signature <24092400 released on 24/Sep/2024 on MacOS allows a malformed eml file to crash the application during file processing.

A vulnerability was found in code-projects Train Ticket Reservation System 1.0. It has been declared as critical. Affected by this vulnerability is the function Reservation of the component Ticket Reservation. The manipulation of the argument Name leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.

In Arm Trusted Firmware M through 1.2, the NS world may trigger a system halt, an overwrite of secure data, or the printing out of secure data when calling secure functions under the NSPE handler mode.

The TCOS smart card software driver in OpenSC before 0.21.0-rc1 has a stack-based buffer overflow in tcos_decipher.

zsh through version 5.4.2 is vulnerable to a stack-based buffer overflow in the exec.c:hashcmd() function. A local attacker could exploit this to cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must only touch as many descriptors, otherwise it ends up corrupting unrelated memory. Fix the loop iteration count accordingly.

AMD System Management Unit (SMU) may experience a heap-based overflow which may result in a loss of resources.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix buffer overwrite when using > 32 buffers The maximum number of buffers that can be requested was increased to 64 for the video capture queue. But video capture used a must_blank array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an out-of-bounds write when using buffer indices >= 32. Create a new define MAX_VID_CAP_BUFFERS that is used to access the must_blank array and set max_num_buffers for the video capture queue. This solves a crash reported by: https://bugzilla.kernel.org/show_bug.cgi?id=219258

In the Linux kernel, the following vulnerability has been resolved: bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false). With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison: if (old_rx_rings != bp->hw_resc.resv_rx_rings) in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index. We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression: BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 Read of size 2 at addr ffff8881c5809618 by task ethtool/31525 Call Trace: __bnxt_hwrm_vnic_set_rss+0xb79/0xe40 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460 __bnxt_setup_vnic_p5+0x12e/0x270 __bnxt_open_nic+0x2262/0x2f30 bnxt_open_nic+0x5d/0xf0 ethnl_set_channels+0x5d4/0xb30 ethnl_default_set_doit+0x2f1/0x620

In the Linux kernel, the following vulnerability has been resolved: tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' When generate a synthetic event with many params and then create a trace action for it [1], kernel panic happened [2]. It is because that in trace_action_create() 'data->n_params' is up to SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx' keeps indices into array 'hist_data->var_refs' for each synthetic event param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX (current value is 16), so out-of-bound write happened when 'data->n_params' more than 16. In this case, 'data->match_data.event' is overwritten and eventually cause the panic. To solve the issue, adjust the length of 'data->var_ref_idx' to be SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write. [1] # cd /sys/kernel/tracing/ # echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63" >> synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \ events/sched/sched_waking/trigger # echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger [2] BUG: unable to handle page fault for address: ffff91c900000000 PGD 61001067 P4D 61001067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:strcmp+0xc/0x30 Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3 RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000 RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000 R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580 R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538 FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0 Call Trace: <TASK> __find_event_file+0x55/0x90 action_create+0x76c/0x1060 event_hist_trigger_parse+0x146d/0x2060 ? event_trigger_write+0x31/0xd0 trigger_process_regex+0xbb/0x110 event_trigger_write+0x6b/0xd0 vfs_write+0xc8/0x3e0 ? alloc_fd+0xc0/0x160 ? preempt_count_add+0x4d/0xa0 ? preempt_count_add+0x70/0xa0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1d1d0cf077 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077 RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001 RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142 R ---truncated---

In wifi service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

In wifi service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

In FM service , there is a possible missing params check. This could lead to local denial of service in FM service .

A vulnerability was found in PHP where setting the environment variable PHP_CLI_SERVER_WORKERS to a large value leads to a heap buffer overflow.