Eximious Logo Designer 3.82 has a User Mode Write AV starting at ExiCustomPathLib!ExiCustomPathLib::CGradientColorsProfile::BuildGradientColorsTable+0x0000000000000053.
Eximious Logo Designer 3.82 has Heap Corruption starting at ntdll!RtlpNtMakeTemporaryKey+0x0000000000001a78.
The NHI card’s web service component has a stack-based buffer overflow vulnerability due to insufficient validation for network packet key parameter. A LAN attacker with general user privilege can exploit this vulnerability to disrupt service.
An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).
TensorFlow is an end-to-end open source platform for machine learning. The implementation of `tf.raw_ops.ReverseSequence` allows for stack overflow and/or `CHECK`-fail based denial of service. The implementation(https://github.com/tensorflow/tensorflow/blob/5b3b071975e01f0d250c928b2a8f901cd53b90a7/tensorflow/core/kernels/reverse_sequence_op.cc#L114-L118) fails to validate that `seq_dim` and `batch_dim` arguments are valid. Negative values for `seq_dim` can result in stack overflow or `CHECK`-failure, depending on the version of Eigen code used to implement the operation. Similar behavior can be exhibited by invalid values of `batch_dim`. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.
AsIO2_64.sys and AsIO2_32.sys in ASUS GPUTweak II before 2.3.0.3 allow low-privileged users to trigger a stack-based buffer overflow. This could enable low-privileged users to achieve Denial of Service via a DeviceIoControl.
TensorFlow is an end-to-end open source platform for machine learning. An attacker can cause a heap buffer overflow by passing crafted inputs to `tf.raw_ops.StringNGrams`. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/1cdd4da14282210cc759e468d9781741ac7d01bf/tensorflow/core/kernels/string_ngrams_op.cc#L171-L185) fails to consider corner cases where input would be split in such a way that the generated tokens should only contain padding elements. If input is such that `num_tokens` is 0, then, for `data_start_index=0` (when left padding is present), the marked line would result in reading `data[-1]`. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.
In Arm Trusted Firmware M through 1.2, the NS world may trigger a system halt, an overwrite of secure data, or the printing out of secure data when calling secure functions under the NSPE handler mode.
AMD System Management Unit (SMU) may experience a heap-based overflow which may result in a loss of resources.
Out-of-bounds array access vulnerability in the ArkUI framework. Impact: Successful exploitation of this vulnerability may affect availability.
Buffer overflow in OpenVPN ovpn-dco-win version 1.3.0 and earlier and version 2.5.8 and earlier allows a local user process to send a too large control message buffer to the kernel driver resulting in a system crash
An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said issue while updating controller state fields and their subsequent processing. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
An issue was discovered in the Linux kernel 5.4 and 5.5 through 5.5.6 on the AArch64 architecture. It ignores the top byte in the address passed to the brk system call, potentially moving the memory break downwards when the application expects it to move upwards, aka CID-dcde237319e6. This has been observed to cause heap corruption with the GNU C Library malloc implementation.
Taurus-AN00B versions earlier than 10.1.0.156(C00E155R7P2) have an out-of-bounds read and write vulnerability. Some functions do not verify inputs sufficiently. Attackers can exploit this vulnerability by sending specific request. This could compromise normal service of the affected device.
In QEMU 3.1, scsi_handle_inquiry_reply in hw/scsi/scsi-generic.c allows out-of-bounds write and read operations.
A memory corruption vulnerability exists in NextCloud Desktop Client v2.6.4 where missing ASLR and DEP protections in for windows allowed to corrupt memory.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x40 is overflowed with the call to sprintf() for any gateway values that are greater than 512-len(‘/etc/config-tools/config_default_gateway number=0 state=enabled value=‘) in length. A gateway value of length 0x7e2 will cause the service to crash.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x440 is overflowed with the call to sprintf() for any type values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled config-type=‘) in length. A type value of length 0x3d9 will cause the service to crash.
Buffer Overflow vulnerability found in Cesanta MJS v.1.26 allows a local attacker to cause a denial of service via the mjs_mk_string function in mjs.c.
In the Linux kernel, the following vulnerability has been resolved: afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and Linux's afs client switches between them when talking to a non-YFS server if the read size, the file position or the sum of the two have the upper 32 bits set of the 64-bit value. This is a problem, however, since the file position and length fields of FS.FetchData are *signed* 32-bit values. Fix this by capturing the capability bits obtained from the fileserver when it's sent an FS.GetCapabilities RPC, rather than just discarding them, and then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be used to decide whether to use FS.FetchData or FS.FetchData64 - and also FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to switch on the parameter values. This capabilities flag could also be used to limit the maximum size of the file, but all servers must be checked for that. Note that the issue does not exist with FS.StoreData - that uses *unsigned* 32-bit values. It's also not a problem with Auristor servers as its YFS.FetchData64 op uses unsigned 64-bit values. This can be tested by cloning a git repo through an OpenAFS client to an OpenAFS server and then doing "git status" on it from a Linux afs client[1]. Provided the clone has a pack file that's in the 2G-4G range, the git status will show errors like: error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index This can be observed in the server's FileLog with something like the following appearing: Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001 Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866 ... Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5 Note the file position of 18446744071815340032. This is the requested file position sign-extended.
Out-of-Bounds Write vulnerability in Jungo WinDriver before 12.6.0 allows local attackers to cause a Windows blue screen error and Denial of Service (DoS).
In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4]
A heap-based buffer overflow in the vrend_renderer_transfer_write_iov function in vrend_renderer.c in virglrenderer through 0.8.0 allows guest OS users to cause a denial of service via VIRGL_CCMD_RESOURCE_INLINE_WRITE commands.
In jpg driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.
QEMU (aka Quick Emulator) built to use 'address_space_translate' to map an address to a MemoryRegionSection is vulnerable to an OOB r/w access issue. It could occur while doing pci_dma_read/write calls. Affects QEMU versions >= 1.6.0 and <= 2.3.1. A privileged user inside guest could use this flaw to crash the guest instance resulting in DoS.
In /SM8250_Q_Master/android/vendor/oppo_charger/oppo/oppo_vooc.c, the function proc_fastchg_fw_update_write in proc_fastchg_fw_update_write does not check the parameter len, resulting in a vulnerability.
Out-of-bounds write in some Intel(R) Graphics Drivers before version 15.36.39.5143 may allow an authenticated user to potentially enable denial of service via local access.
In /SM8250_Q_Master/android/vendor/oppo_charger/oppo/charger_ic/oppo_mp2650.c, the function mp2650_data_log_write in mp2650_data_log_write does not check the parameter len which causes a vulnerability.
In functions charging_limit_current_write and charging_limit_time_write in /SM8250_Q_Master/android/vendor/oppo_charger/oppo/oppo_charger.c have not checked the parameters, which causes a vulnerability.
Unicorn Engine 1.0.2 has an out-of-bounds write in helper_wfe_arm.
A vulnerability was found in code-projects Train Ticket Reservation System 1.0. It has been declared as critical. Affected by this vulnerability is the function Reservation of the component Ticket Reservation. The manipulation of the argument Name leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.
Stack overflow in XHCI for EDK II may allow an unauthenticated user to potentially enable denial of service via local access.
Memory corruption due to invalid value of total dimension in the non-histogram type KPI could lead to a denial of service in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile
The pnv_lpc_do_eccb function in hw/ppc/pnv_lpc.c in Qemu before 3.1 allows out-of-bounds write or read access to PowerNV memory.
A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos OS allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS * All versions prior to 19.1R3-S10; * 19.2 versions prior to 19.2R3-S7; * 19.3 versions prior to 19.3R3-S8; * 19.4 versions prior to 19.4R3-S12; * 20.2 versions prior to 20.2R3-S8; * 20.4 versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1; * 23.2 versions prior to 23.2R2.
The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.
Out-of-Bounds Write vulnerability in Jungo WinDriver before 12.5.1 allows local attackers to cause a Windows blue screen error and Denial of Service (DoS).
A vulnerability, which was classified as critical, was found in Open Asset Import Library Assimp 5.4.3. Affected is the function Assimp::MD2Importer::InternReadFile in the library code/AssetLib/MD2/MD2Loader.cpp of the component Malformed File Handler. The manipulation of the argument Name leads to stack-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.
An issue was discovered in sd-bus in systemd 239. bus_process_object() in libsystemd/sd-bus/bus-objects.c allocates a variable-length stack buffer for temporarily storing the object path of incoming D-Bus messages. An unprivileged local user can exploit this by sending a specially crafted message to PID1, causing the stack pointer to jump over the stack guard pages into an unmapped memory region and trigger a denial of service (systemd PID1 crash and kernel panic).
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). The destination buffer sp+0x440 is overflowed with the call to sprintf() for any domainname values that are greater than 1024-len(‘/etc/config-tools/edit_dns_server domain-name=‘) in length. A domainname value of length 0x3fa will cause the service to crash.
A vulnerability, which was classified as problematic, was found in HDF5 up to 1.14.6. This affects the function H5HL__fl_deserialize of the file src/H5HLcache.c. The manipulation of the argument free_block leads to heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used.
A vulnerability classified as problematic was found in HDF5 up to 1.14.6. This vulnerability affects the function H5F__accum_free of the file src/H5Faccum.c. The manipulation of the argument overlap_size leads to heap-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.
TensorFlow is an open source platform for machine learning. In version 2.8.0, the `TensorKey` hash function used total estimated `AllocatedBytes()`, which (a) is an estimate per tensor, and (b) is a very poor hash function for constants (e.g. `int32_t`). It also tried to access individual tensor bytes through `tensor.data()` of size `AllocatedBytes()`. This led to ASAN failures because the `AllocatedBytes()` is an estimate of total bytes allocated by a tensor, including any pointed-to constructs (e.g. strings), and does not refer to contiguous bytes in the `.data()` buffer. The discoverers could not use this byte vector anyway because types such as `tstring` include pointers, whereas they needed to hash the string values themselves. This issue is patched in Tensorflow versions 2.9.0 and 2.8.1.
The Linux kernel was found vulnerable out of bounds memory access in the drivers/video/fbdev/sm712fb.c:smtcfb_read() function. The vulnerability could result in local attackers being able to crash the kernel.
Tensorflow is an Open Source Machine Learning Framework. The TFG dialect of TensorFlow (MLIR) makes several assumptions about the incoming `GraphDef` before converting it to the MLIR-based dialect. If an attacker changes the `SavedModel` format on disk to invalidate these assumptions and the `GraphDef` is then converted to MLIR-based IR then they can cause a crash in the Python interpreter. Under certain scenarios, heap OOB read/writes are possible. These issues have been discovered via fuzzing and it is possible that more weaknesses exist. We will patch them as they are discovered.
Out-of-bounds write in accessing uninitialized memory in libsavsvc.so prior to Android 15 allows local attackers to cause memory corruption.
zsh through version 5.4.2 is vulnerable to a stack-based buffer overflow in the exec.c:hashcmd() function. A local attacker could exploit this to cause a denial of service.
In the Linux kernel, the following vulnerability has been resolved: Both cadence-quadspi ->runtime_suspend() and ->runtime_resume() implementations start with: struct cqspi_st *cqspi = dev_get_drvdata(dev); struct spi_controller *host = dev_get_drvdata(dev); This obviously cannot be correct, unless "struct cqspi_st" is the first member of " struct spi_controller", or the other way around, but it is not the case. "struct spi_controller" is allocated by devm_spi_alloc_host(), which allocates an extra amount of memory for private data, used to store "struct cqspi_st". The ->probe() function of the cadence-quadspi driver then sets the device drvdata to store the address of the "struct cqspi_st" structure. Therefore: struct cqspi_st *cqspi = dev_get_drvdata(dev); is correct, but: struct spi_controller *host = dev_get_drvdata(dev); is not, as it makes "host" point not to a "struct spi_controller" but to the same "struct cqspi_st" structure as above. This obviously leads to bad things (memory corruption, kernel crashes) directly during ->probe(), as ->probe() enables the device using PM runtime, leading the ->runtime_resume() hook being called, which in turns calls spi_controller_resume() with the wrong pointer. This has at least been reported [0] to cause a kernel crash, but the exact behavior will depend on the memory contents. [0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/ This issue potentially affects all platforms that are currently using the cadence-quadspi driver.
In the Linux kernel, the following vulnerability has been resolved: arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't quite right, as it is supposed to be applied after the last explicit memory access, but is immediately followed by an LDR. The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295, which are described in: * https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en * https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en In both cases the workaround is described as: | If pagetable isolation is disabled, the context switch logic in the | kernel can be updated to execute the following sequence on affected | cores before exiting to EL0, and after all explicit memory accesses: | | 1. A non-shareable TLBI to any context and/or address, including | unused contexts or addresses, such as a `TLBI VALE1 Xzr`. | | 2. A DSB NSH to guarantee completion of the TLBI. The important part being that the TLBI+DSB must be placed "after all explicit memory accesses". Unfortunately, as-implemented, the TLBI+DSB is immediately followed by an LDR, as we have: | alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD | tlbi vale1, xzr | dsb nsh | alternative_else_nop_endif | alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0 | ldr lr, [sp, #S_LR] | add sp, sp, #PT_REGS_SIZE // restore sp | eret | alternative_else_nop_endif | | [ ... KPTI exception return path ... ] This patch fixes this by reworking the logic to place the TLBI+DSB immediately before the ERET, after all explicit memory accesses. The ERET is currently in a separate alternative block, and alternatives cannot be nested. To account for this, the alternative block for ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch to skip the KPTI logic, with the new shape of the logic being: | alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0 | [ ... KPTI exception return path ... ] | .L_skip_tramp_exit_\@: | | ldr lr, [sp, #S_LR] | add sp, sp, #PT_REGS_SIZE // restore sp | | alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD | tlbi vale1, xzr | dsb nsh | alternative_else_nop_endif | eret The new structure means that the workaround is only applied when KPTI is not in use; this is fine as noted in the documented implications of the erratum: | Pagetable isolation between EL0 and higher level ELs prevents the | issue from occurring. ... and as per the workaround description quoted above, the workaround is only necessary "If pagetable isolation is disabled".
An out-of-bounds write in the engine module in AVG/Avast Antivirus signature <24092400 released on 24/Sep/2024 on MacOS allows a malformed eml file to crash the application during file processing.