OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.0.0 and prior to version 4.11.0, 32-bit integer overflows in OP-TEE core's AES-GCM implementation cause the authentication tag to be computed with incorrect bit-length values after processing more than 512 megabytes of payload or Additional Authenticated Data (AAD). Version 4.11.0 contains a patch. No known workarounds are available.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.20.0 and prior to version 4.11.0, a vulnerability in OP-TEE’s subkey rollback protection allows the use of revoked or older subkey versions because the system fails to propagate versioning data during the Trusted Application (TA) loading process. In `core/crypto/signed_hdr.c`, the function `shdr_load_pub_key()` parses subkey headers but does not assign the `subkey_version` to the runtime `shdr_pub_key` structure. As a result, the `key->version` field remains at zero regardless of the version specified in the header. When `ree_fs_ta_open()` in `core/kernel/ree_fs_ta.c` calls `check_update_version()`, it passes this zeroed version to the rollback database. Because the database never receives a non-zero version to record, it never advances, effectively bypassing the rollback check and allowing TAs signed with downgraded subkey chains to load successfully. This impacts OP-TEE mainline configurations that utilize subkey-based signing chains for Trusted Application (TA) authentication. Version 4.11.0 contains a patch. No known workarounds are available.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.3.0 and prior to version 4.11.0, a resource leak exists in OP-TEE’s shared memory cleanup logic because the function `cleanup_shm_refs()` in `core/tee/entry_std.c` fails to apply a required bitmask (`OPTEE_MSG_ATTR_TYPE_MASK`) to parameter attributes. When processing non-contiguous memory parameters from a normal-world caller, the system fails to match the attribute type in its internal switch statement and skips the necessary mobj_put() call. This results in a persistent reference leak of `mobj_reg_shm` objects, which remain on internal lists with dangling refcounts. This affects non-FF-A configurations that support non-contiguous, non-secure shared memory. Over time, these accumulated leaks progressively consume the secure-world heap, degrading the system's ability to service trusted application operations and eventually requiring a reboot to recover. Version 4.11.0 contains a patch. No known workarounds are available.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.5.0 and prior to version 4.11.0, the RSA PKCS#1 v1.5 decryption implementation in the Hisilicon HPRE crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Bleichenbacher-style padding oracle that allows an attacker to recover RSA PKCS#1 v1.5 plaintext. Version 4.11.0 contains a patch. As a workaround, disable Hisilicon HPRE RSA driver with `CFG_HISILICON_ACC_V3=n`.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.9.0 and prior to version 4.11.0, the RSA-OAEP decryption implementation in the NXP CAAM crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Manger-style padding oracle that allows an attacker to recover RSA-OAEP plaintext with approximately 1000-2000 adaptive chosen ciphertext queries. Version 4.11.0 contains a patch. As a workaround, disable the NXP CAAM RSA driver with `CFG_CRYPTO_DRV_RSA=n`.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.5.0 and prior to version 4.11.0, the RSA-OAEP decryption implementation in the Hisilicon HPRE crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Manger-style padding oracle that allows an attacker to recover RSA-OAEP plaintext with approximately 1000-2000 adaptive chosen ciphertext queries. Only affects plat-d06 with `CFG_HISILICON_ACC_V3=y`, which seems to be disabled by default. Version 4.11.0 contains a patch. As a workaround, disable Hisilicon HPRE RSA driver with `CFG_HISILICON_ACC_V3=n`.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.10.0 and prior to version 4.11.0, an unbounded recursion can crash the PKCS#11 TA. Version 4.11.0 contains a patch. No known workarounds are available.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.21.0 and prior to version 4.11.0, the ARM Crypto Extensions accelerated SHA-3 implementation has an off-by-one error that can cause a massive heap overflow that corrupts all TEE kernel memory following the hash state. This affects all platforms built with `CFG_CRYPTO_WITH_CE82=y` (ARMv8.2+ with SHA3 Crypto Extensions). Version 4.11.0 contains a patch. As a workaround, disable SHA3 Crypto Extensions with `CFG_CRYPTO_WITH_CE82=n`.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.3.0 and prior to version 4.11.0, a type confusion vulnerability exists in OP-TEE OS when processing an FFA_MEM_SHARE request from the normal world. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_CORE_SEL1_SPMC=y` and `CFG_SECURE_PARTITION=y`. Version 4.11.0 fixes the issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Prior to version 4.11.0, on many of the ECDH shared secret paths, the public key isn't verified to be a point on the correct curve. By passing approximately 30-40 crafted public keys to OP-TEE, the private key can be reconstructed by a normal world attacker. When calling TEE_DeriveKey the public key is provided with full X and Y values, but the (X, Y) point might not satisfy the `Y^2 == X^3 + aX + b mod P` math for the specific curve that is used. When those public keys aren't rejected, the attacker can select public keys such that each DeriveKey call will leak `d % r` where `d` is the private key and `r` comes from the relationship between the correct curve and the attacker selected curve. With enough leaked data the Chinese remainder theorem can be used to recover the full private key. Version 4.11.0 fixes the issue.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.16.0 and prior to 4.11.0, a user-after-free (UAF) race condition exists in the shared memory teardown logic of FF-A within OP-TEE SPMC/SP flows. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_SECURE_PARTITION=y`. The function `sp_mem_remove()`, responsible for freeing entries in `smem->receivers` and `smem->regions`, fails to acquire the global `sp_mem_lock` before performing the `free()` operations. Concurrently, other code paths, such as `sp_mem_get_receiver()`, iterate over these same lists without holding a lock, or, like `sp_mem_is_shared()`, iterate while holding the lock but are not serialized against the unprotected `free()` in `sp_mem_remove()`. This creates a cross-thread race where a thread iterating the list can acquire a pointer to an entry (e.g., `struct sp_mem_map_region` or `struct sp_mem_receiver`), and then another thread calls `sp_mem_remove()`, freeing the object. When the first thread resumes and dereferences the pointer, it results in a Use-After-Free vulnerability. Version 4.11.0 fixes the issue.

An issue was discovered in Mbed TLS versions from 2.19.0 up to 3.6.5, Mbed TLS 4.0.0. Insufficient protection of serialized SSL context or session structures allows an attacker who can modify the serialized structures to induce memory corruption, leading to arbitrary code execution. This is caused by Incorrect Use of Privileged APIs.

An issue was discovered in Mbed TLS 3.x before 3.6.6. An out-of-bounds read vulnerability in mbedtls_ccm_finish() in library/ccm.c allows attackers to obtain adjacent CCM context data via invocation of the multipart CCM API with an oversized tag_len parameter. This is caused by missing validation of the tag_len parameter against the size of the internal 16-byte authentication buffer. The issue affects the public multipart CCM API in Mbed TLS 3.x, where mbedtls_ccm_finish() can be invoked directly by applications. In Mbed TLS 4.x versions prior to the fix, the same missing validation exists in the internal implementation; however, the function is not exposed as part of the public API. Exploitation requires application-level invocation of the multipart CCM API.

An issue was discovered in Mbed TLS through 3.6.5 and 4.x through 4.0.0. There is a NULL pointer dereference in distinguished name parsing that allows an attacker to write to address 0.

An issue was discovered in Mbed TLS through 3.6.5 and TF-PSA-Crypto 1.0.0. A buffer overflow can occur in public key export for FFDH keys.

An issue was discovered in Mbed TLS 3.5.0 through 4.0.0. Client impersonation can occur while resuming a TLS 1.3 session.

An issue was discovered in Mbed TLS before 3.6.6 and 4.x before 4.1.0 and TF-PSA-Crypto before 1.1.0. There is a Predictable Seed in a Pseudo-Random Number Generator (PRNG).

Mbed TLS before 3.6.6 and TF-PSA-Crypto before 1.1.0 misuse seeds in a Pseudo-Random Number Generator (PRNG).

Mbed TLS v3.3.0 up to 3.6.5 and 4.0.0 allows Algorithm Downgrade.

Mbed TLS 3.5.0 to 3.6.5 fixed in 3.6.6 and 4.1.0 has a buffer overflow in the x509_inet_pton_ipv6() function

In Mbed TLS 3.6.1 through 3.6.3 before 3.6.4, a timing discrepancy in block cipher padding removal allows an attacker to recover the plaintext when PKCS#7 padding mode is used.

In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_import_public_key does not check that the input buffer is at least 4 bytes before reading a 32-bit field, allowing a possible out-of-bounds read on truncated input. Specifically, an out-of-bounds read in mbedtls_lms_import_public_key allows context-dependent attackers to trigger a crash or limited adjacent-memory disclosure by supplying a truncated LMS (Leighton-Micali Signature) public-key buffer under four bytes. An LMS public key starts with a 4-byte type indicator. The function mbedtls_lms_import_public_key reads this type indicator before validating the size of its input.

In MbedTLS 3.3.0 before 3.6.4, mbedtls_lms_verify may accept invalid signatures if hash computation fails and internal errors go unchecked, enabling LMS (Leighton-Micali Signature) forgery in a fault scenario. Specifically, unchecked return values in mbedtls_lms_verify allow an attacker (who can induce a hardware hash accelerator fault) to bypass LMS signature verification by reusing stale stack data, resulting in acceptance of an invalid signature. In mbedtls_lms_verify, the return values of the internal Merkle tree functions create_merkle_leaf_value and create_merkle_internal_value are not checked. These functions return an integer that indicates whether the call succeeded or not. If a failure occurs, the output buffer (Tc_candidate_root_node) may remain uninitialized, and the result of the signature verification is unpredictable. When the software implementation of SHA-256 is used, these functions will not fail. However, with hardware-accelerated hashing, an attacker could use fault injection against the accelerator to bypass verification.

Mbed TLS before 2.28.10 and 3.x before 3.6.3, in some cases of failed memory allocation or hardware errors, uses uninitialized stack memory to compose the TLS Finished message, potentially leading to authentication bypasses such as replays.

Mbed TLS before 2.28.10 and 3.x before 3.6.3, on the client side, accepts servers that have trusted certificates for arbitrary hostnames unless the TLS client application calls mbedtls_ssl_set_hostname.

Mbed TLS 3.5.x through 3.6.x before 3.6.2 has a buffer underrun in pkwrite when writing an opaque key pair

An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE).

An issue was discovered in Trusted Firmware-M through 2.0.0. The lack of argument verification in the logging subsystem allows attackers to read sensitive data via the login function.

An issue was discovered in Mbed TLS 3.x before 3.6.1. With TLS 1.3, when a server enables optional authentication of the client, if the client-provided certificate does not have appropriate values in if keyUsage or extKeyUsage extensions, then the return value of mbedtls_ssl_get_verify_result() would incorrectly have the MBEDTLS_X509_BADCERT_KEY_USAGE and MBEDTLS_X509_BADCERT_KEY_USAGE bits clear. As a result, an attacker that had a certificate valid for uses other than TLS client authentication would nonetheless be able to use it for TLS client authentication. Only TLS 1.3 servers were affected, and only with optional authentication (with required authentication, the handshake would be aborted with a fatal alert).

An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.)

An issue was discovered in Mbed TLS before 2.28.9 and 3.x before 3.6.1, in which the user-selected algorithm is not used. Unlike previously documented, enabling MBEDTLS_PSA_HMAC_DRBG_MD_TYPE does not cause the PSA subsystem to use HMAC_DRBG: it uses HMAC_DRBG only when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_CTR_DRBG_C are disabled.

Improper input validation in ARM® Trusted Firmware used in AMD’s Zynq™ UltraScale+™) MPSoC/RFSoC may allow a privileged attacker to perform out of bound reads, potentially resulting in data leakage and denial of service.

An issue was discovered in Mbed TLS 3.5.x before 3.6.0. When negotiating the TLS version on the server side, it can fall back to the TLS 1.2 implementation of the protocol if it is disabled. If the TLS 1.2 implementation was disabled at build time, a TLS 1.2 client could put a TLS 1.3-only server into an infinite loop processing a TLS 1.2 ClientHello, resulting in a denial of service. If the TLS 1.2 implementation was disabled at runtime, a TLS 1.2 client can successfully establish a TLS 1.2 connection with the server.

An issue was discovered in Mbed TLS 3.5.x before 3.6.0. When an SSL context was reset with the mbedtls_ssl_session_reset() API, the maximum TLS version to be negotiated was not restored to the configured one. An attacker was able to prevent an Mbed TLS server from establishing any TLS 1.3 connection, potentially resulting in a Denial of Service or forced version downgrade from TLS 1.3 to TLS 1.2.

In Mbed TLS 3.3.0 through 3.5.2 before 3.6.0, a malicious client can cause information disclosure or a denial of service because of a stack buffer over-read (of less than 256 bytes) in a TLS 1.3 server via a TLS 3.1 ClientHello.

An issue was discovered in Mbed TLS 2.18.0 through 2.28.x before 2.28.8 and 3.x before 3.6.0, and Mbed Crypto. The PSA Crypto API mishandles shared memory.

An issue was discovered in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2. There was a timing side channel in RSA private operations. This side channel could be sufficient for a local attacker to recover the plaintext. It requires the attacker to send a large number of messages for decryption, as described in "Everlasting ROBOT: the Marvin Attack" by Hubert Kario.

Integer Overflow vulnerability in Mbed TLS 2.x before 2.28.7 and 3.x before 3.5.2, allows attackers to cause a denial of service (DoS) via mbedtls_x509_set_extension().

An issue was discovered in Mbed TLS 3.5.1. There is persistent handshake denial if a client sends a TLS 1.3 ClientHello without extensions.

Mbed TLS 3.2.x through 3.4.x before 3.5 has a Buffer Overflow that can lead to remote Code execution.

Mbed TLS 2.x before 2.28.5 and 3.x before 3.5.0 has a Buffer Overflow.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.20 and prior to version 3.22, `shdr_verify_signature` can make a double free. `shdr_verify_signature` used to verify a TA binary before it is loaded. To verify a signature of it, allocate a memory for RSA key. RSA key allocate function (`sw_crypto_acipher_alloc_rsa_public_key`) will try to allocate a memory (which is optee’s heap memory). RSA key is consist of exponent and modulus (represent as variable `e`, `n`) and it allocation is not atomic way, so it may succeed in `e` but fail in `n`. In this case sw_crypto_acipher_alloc_rsa_public_key` will free on `e` and return as it is failed but variable ‘e’ is remained as already freed memory address . `shdr_verify_signature` will free again that memory (which is `e`) even it is freed when it failed allocate RSA key. A patch is available in version 3.22. No known workarounds are available.

In Trusted Firmware-M through TF-Mv1.8.0, for platforms that integrate the CryptoCell accelerator, when the CryptoCell PSA Driver software Interface is selected, and the Authenticated Encryption with Associated Data Chacha20-Poly1305 algorithm is used, with the single-part verification function (defined during the build-time configuration phase) implemented with a dedicated function (i.e., not relying on usage of multipart functions), the buffer comparison during the verification of the authentication tag does not happen on the full 16 bytes but just on the first 4 bytes, thus leading to the possibility that unauthenticated payloads might be identified as authentic. This affects TF-Mv1.6.0, TF-Mv1.6.1, TF-Mv1.7.0, and TF-Mv1.8.

Use of a Broken or Risky Cryptographic Algorithm in the function mbedtls_mpi_exp_mod() in lignum.c in Mbed TLS Mbed TLS all versions before 3.0.0, 2.27.0 or 2.16.11 allows attackers with access to precise enough timing and memory access information (typically an untrusted operating system attacking a secure enclave such as SGX or the TrustZone secure world) to recover the private keys used in RSA.

Trusted Firmware-A through 2.8 has an out-of-bounds read in the X.509 parser for parsing boot certificates. This affects downstream use of get_ext and auth_nvctr. Attackers might be able to trigger dangerous read side effects or obtain sensitive information about microarchitectural state.

An unprotected memory-access operation in optee_os in TrustedFirmware Open Portable Trusted Execution Environment (OP-TEE) before 3.20 allows a physically proximate adversary to bypass signature verification and install malicious trusted applications via electromagnetic fault injections.

An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. There is a potential heap-based buffer overflow and heap-based buffer over-read in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.

An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) can recover an RSA private key after observing the victim performing a single private-key operation, if the window size (MBEDTLS_MPI_WINDOW_SIZE) used for the exponentiation is 3 or smaller.

An issue was discovered in Mbed TLS before 2.28.1 and 3.x before 3.2.0. In some configurations, an unauthenticated attacker can send an invalid ClientHello message to a DTLS server that causes a heap-based buffer over-read of up to 255 bytes. This can cause a server crash or possibly information disclosure based on error responses. Affected configurations have MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE enabled and MBEDTLS_SSL_IN_CONTENT_LEN less than a threshold that depends on the configuration: 258 bytes if using mbedtls_ssl_cookie_check, and possibly up to 571 bytes with a custom cookie check function.

Trusted Firmware M 1.4.x through 1.4.1 has a buffer overflow issue in the Firmware Update partition. In the IPC model, a psa_fwu_write caller from SPE or NSPE can overwrite stack memory locations.