An issue was discovered on Momentum Axel 720P 5.1.8 devices. The root password can be obtained in cleartext by issuing the command 'showKey' from the root CLI. This password may be the same on all devices

Unconstrained Web access to the device's private encryption key in the QR code pairing mode in the eWeLink mobile application (through 4.9.2 on Android and through 4.9.1 on iOS) allows a physically proximate attacker to eavesdrop on Wi-Fi credentials and other sensitive information by monitoring the Wi-Fi spectrum during a device pairing process.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user account passwords set in clear text could leak to users without any password. This issue affects: Arista Metamako Operating System MOS-0.18 and post releases in the MOS-0.1x train All releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

Lexiglot through 2014-11-20 allows local users to obtain sensitive information by listing a process because the username and password are on the command line.

Plaintext Storage of Passwords in the administrative console in Dialogic PowerMedia XMS before 3.5 SU2 allows local users to access the web application's user passwords in cleartext by reading /var/www/xms/xmsdb/default.db.

Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.

If a user saved passwords before Firefox 58 and then later set a master password, an unencrypted copy of these passwords is still accessible. This is because the older stored password file was not deleted when the data was copied to a new format starting in Firefox 58. The new master password is added only on the new file. This could allow the exposure of stored password data outside of user expectations. This vulnerability affects Firefox < 62, Firefox ESR < 60.2.1, and Thunderbird < 60.2.1.

Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Linux

The Tableau integration in RSA Archer 6.4 P1 (6.4.0.1) through 6.9 P2 (6.9.0.2) is affected by an insecure credential storage vulnerability. An malicious attacker with access to the Tableau workbook file may obtain access to credential information to use it in further attacks.

Insufficiently protected credentials in the Intel(R) EMA before version 1.3.3 may allow an authorized user to potentially enable information disclosure via local access.

Dell EMC Secure Remote Services, versions prior to 3.32.00.08, contains a Plaintext Password Storage vulnerability. Database credentials are stored in plaintext in a configuration file. An authenticated malicious user with access to the configuration file may obtain the exposed password to gain access to the application database.

A vulnerability that stores IMSI values in an improper path prior to SMR APR-2021 Release 1 allows local attackers to access IMSI values without any permission via untrusted applications.

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

Synametrics SynaMan 4.0 build 1488 uses cleartext password storage for SMTP credentials.

ovirt-engine up to version 4.2.3 is vulnerable to an unfiltered password when choosing manual db provisioning. When engine-setup was run and one chooses to provision the database manually or connect to a remote database, the password input was logged in cleartext during the verification step. Sharing the provisioning log might inadvertently leak database passwords.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Ansible before 1.5.5 sets 0644 permissions for sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by reading a file that uses the "deb http://user:pass@server:port/" format.

A plaintext storage of a password vulnerability exists in Jenkins Coverity Plugin 1.10.0 and earlier in CIMInstance.java that allows an attacker with local file system access or control of a Jenkins administrator's web browser (e.g. malicious extension) to retrieve the configured keystore and private key passwords.

Previous releases of the Puppet device_manager module creates configuration files containing credentials that are world readable. This issue has been resolved as of device_manager 2.7.0.

An insufficiently protected credentials vulnerability exists in Jenkins Artifactory Plugin 2.16.1 and earlier in ArtifactoryBuilder.java, CredentialsConfig.java that allows attackers with local file system access to obtain old credentials configured for the plugin before it integrated with Credentials Plugin.

Jenkins project Jenkins AWS CodeBuild Plugin version 0.26 and earlier contains a Insufficiently Protected Credentials vulnerability in AWSClientFactory.java, CodeBuilder.java that can result in Credentials Disclosure. This attack appear to be exploitable via local file access. This vulnerability appears to have been fixed in 0.27 and later.

An insufficiently protected credentials vulnerability exists in Jenkins SonarQube Scanner Plugin 2.8 and earlier in SonarInstallation.java that allows attackers with local file system access to obtain the credentials used to connect to SonarQube.

An insufficiently protected credentials vulnerability exists in Jenkins Crowd 2 Integration Plugin 2.0.0 and earlier in CrowdSecurityRealm.java, CrowdConfigurationService.java that allows attackers with local file system access to obtain the credentials used to connect to Crowd 2.

Jenkins project Jenkins AWS CodeDeploy Plugin version 1.19 and earlier contains a Insufficiently Protected Credentials vulnerability in AWSCodeDeployPublisher.java that can result in Credentials Disclosure. This attack appear to be exploitable via local file access. This vulnerability appears to have been fixed in 1.20 and later.

Jenkins project Jenkins AWS CodePipeline Plugin version 0.36 and earlier contains a Insufficiently Protected Credentials vulnerability in AWSCodePipelineSCM.java that can result in Credentials Disclosure. This attack appear to be exploitable via local file access. This vulnerability appears to have been fixed in 0.37 and later.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

Insufficiently Protected Credentials vulnerability exists in EcoStruxure Control Expert (all versions prior to V15.0 SP1, including all versions of Unity Pro), EcoStruxure Process Expert (all versions, including all versions of EcoStruxure Hybrid DCS), and SCADAPack RemoteConnect for x70, all versions, that could cause a leak of SMTP credential used for mailbox authentication when an attacker can access a project file.

calamares-nixos-extensions provides Calamares branding and modules for NixOS, a distribution of GNU/Linux. Users of calamares-nixos-extensions version 0.3.12 and prior who installed NixOS through the graphical calamares installer, with an unencrypted `/boot`, on either non-UEFI systems or with a LUKS partition different from `/` have their LUKS key file in `/boot` as a plaintext CPIO archive attached to their NixOS initrd. A patch is available and anticipated to be part of version 0.3.13 to backport to NixOS 22.11, 23.05, and unstable channels. Expert users who have a copy of their data may, as a workaround, re-encrypt the LUKS partition(s) themselves.

Jenkins Bumblebee HP ALM Plugin 4.1.5 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

A vulnerability in the web portal authentication process of Cisco Prime Collaboration Provisioning could allow an unauthenticated, local attacker to view sensitive data. The vulnerability is due to improper logging of authentication data. An attacker could exploit this vulnerability by monitoring a specific World-Readable file for this authentication data (Cleartext Passwords). An exploit could allow the attacker to gain authentication information for other users. Cisco Bug IDs: CSCvd86602.

Jenkins Nomad Plugin 0.7.4 and earlier stores Docker passwords unencrypted in the global config.xml file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

An information disclosure vulnerability exists in Schneider Electric's IGSS Mobile application version 3.01 and prior. Passwords are stored in clear text in the configuration which can result in exposure of sensitive information.

A design flaw in authentication in Synology Photo Station 6.0-2528 through 6.7.1-3419 allows local users to obtain credentials via cmdline. Synology Photo Station employs the synophoto_dsm_user program to authenticate username and password by "synophoto_dsm_user --auth USERNAME PASSWORD", and local users are able to obtain credentials by sniffing "/proc/*/cmdline".

Jenkins TraceTronic ECU-TEST Plugin 2.23.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 196346.

A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.

CloudForms stores user passwords in recoverable format

IBM Security Guardium 11.2 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 195770.

A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.

PFX Encryption Security Feature Bypass Vulnerability

A vulnerability in the storage of proxy server credentials of Cisco Firepower Management Center (FMC) could allow an authenticated, local attacker to view credentials for a configured proxy server. The vulnerability is due to clear-text storage and weak permissions of related configuration files. An attacker could exploit this vulnerability by accessing the CLI of the affected software and viewing the contents of the affected files. A successful exploit could allow the attacker to view the credentials that are used to access the proxy server.

Insufficiently protected credentials in the Intel(R) ON Event Series Android application before version 2.0 may allow an authenticated user to potentially enable information disclosure via local access.

In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in a recoverable format, and may be retrieved by any user with access to the PACTware workstation.

A vulnerability in the Virtual Network Function Manager's (VNFM) logging function of Cisco Ultra Services Platform could allow an authenticated, local attacker to view sensitive data (cleartext credentials) on an affected system. More Information: CSCvd29355. Known Affected Releases: 21.0.v0.65839.

IBM WebSphere Message Broker stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 123777.

Local registry credentials were included directly in the CD4PE deployment definition, which could expose these credentials to users who should not have access to them. This is resolved in Continuous Delivery for Puppet Enterprise 4.0.1.

IBM Robotic Process Automation 21.0.1 and 21.0.2 could allow a user with psychical access to the system to obtain sensitive information due to insufficiently protected access tokens. IBM X-Force ID: 229198.

Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the ADRMS username and password via unprotected log files containing plain text

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.